Glassware

Blade dimension: 4"OD Marine prop – Right-Handed Shaft OAL: 16 1/4 Paddles and impeller assemblies for cell culture Constructed of 316l electropolished stainless steel Reduces shear in delicate cell culture Marine impeller includes 1/2" shaft and impeller blade Omni and z-z paddles are one piece welded, 1/4" shaft (1 per EA )

Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 1L PADDLE: 3" TALL X 3 1/8" WIDE (1 per EA )

Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 3l PADDLE: L X W:4 X 3 IN (1 per EA )

• Designed for the efficient growth of suspension cells at low speeds • Flask Specifications: o 1000 mL flat bottom, Type 1 Class A Borosilicate o Dimensions: 135mm OD x 240mm OAH o Two 45mm Sidearms angled 60º offset center o One 100mm Screw thread center neck o Graduations: 100mL to 1000mL, every 100mL o Includes two 45mm blue PP screw caps and pouring rings • Impeller Assembly Specifications: o Consists of PTFE coated magnet and white Teflon magnet holder • Glass Shaft Specifications: o Type 1 Class A Borosilicate o Dimensions: 7mm OD x 230mm long • Cap Assembly Specifications: o Consists of one 100mm blue PP screw cap with 16.2 mm hole for black compression fitting, 100mm white silicone liner with 15.8mm hole, 7mm black compression fitting (1 per EA )

The Bellco Process Controlled Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm with the ability to select clockwise or counter clockwise direction. Units feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Four corner bumpers and two locking castors (on the front wheel positions) are also provided. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. (1 per EA )

Bellco Magnetic Stirrers are specifically designed for growing both mammalian and bacterial cultures where minimal heat transfer from the magnetic stirrer to the culture vessel is essential. They are ideal for tissue cultures grown in spinner flasks. Bellco incorporates low wattage DC motors to reduce stirrer heat up. Independent power and speed controls allow unit to maintain a speed setting when switched on and off. Powerful magnets rotate on ball bearing shafts for increased coupling and continuous maintenance free service. Polyurethane drive belts resist humidity and temperature. The 100V, 115V & 230V models feature a convenience outlet that allows daisy chaining of up to ten stirrers. Speed range: 30 - 1000 rpm +/- 5% (1 per EA )

H/S Vertical Lift Impeller-36L Complete. Consist Of; 7764-75036 & 7764-76036. Dimensions: (Shaft); 5/8"OD X 23 1/4" Long, (Disk); 5 1/8"OD. 316L Sst (1 per EA )

Blade dimensions: 5 3/4" x 2" Shaft: 14 1/2" Paddles and impeller assemblies for cell culture Constructed of 316l electropolished stainless steel Reduces shear in delicate cell culture Marine impeller includes 1/2" shaft and impeller blade Omni and z-z paddles are one piece welded, 1/4" shaft (1 per EA )

400mm Vigreux column with 24/40 joint. A Vigreux column is a type of air condenser where the simple tube has been modified to include an abundance of downward-pointing indentations. This dramatically increases the surface area per unit length of the condenser. (1 per EA)

Inlet Adapter Used as a vent or for the introduction of pressure/vacuum. Hose standard taper 24/40 joint. No. 2 Hose Connection. Height: 80mm. (1 per EA)

PTFE Stopcock Plug Three-Way For KIMAX Reservoir (17456-182 -184 -186 -188) Class B Automatic Self-Zeroing (17550-061 -083 -108 -120) Class A Serialized/Certified (17527-081 -106 -128) Class B Shellbach (17454-705 -727) and Automatic Self-Zeroing Shellbach Burets (17552-158 -191). (6 per CS )

KIMAX Culture Tube Disposable. Borosilicate Glass. Features smooth top and bottom to prevent cuts. Annealed to reduce breakage along stress points. Supplied in shrink wrapped trays to eliminate breaking and contamination. Sizemm: 13x100. Volume: 10ml. (1000 per CS )

Adapter Bend Receiver with Vent, socket 14/23, Cone 14/23 (1 per EA )

TUBE, TEST, 16 X 150MM,PK/48 (48 per PK)

Sleeve, Glass Joint, PTFE 34/45 (6 per CS)

Serological Pipets, 5 mL, 0.1 graduation interval (12 per PK )

Wide-Tip Serological Pipets, 20 mL, 1.5 mm hole, 435 mm length (12 per PK )

Wide-Tip Volumetric Pipets, 2 mL (12 per PK )

These Type 3 serological pipettes are made from borosilicate glass and comply with USP standards. Color-coded. Batch certified. Calibrated to deliver. Printed with durable amber markings. (5 per PK )

These pipettes are made from borosilicate glass in compliance with ASTM specification E-969. Color-coded. Batch certified. Calibrated to deliver. Printed with durable amber markings. (5 per PK )

Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors. PADDLE L X W (IN): 3 X 6 3/4". (1 per EA )

Hi-torq SST OHD impeller assembly - short width Size:8l For hi-torq motor & cap assembly (7774-40115/40230 & 7764-74000) Similar to 1964-60108 but to accept 1/2" shaft from 7764-74000 cap assembly Material: 316 SST with electropolish finish Paddle size: 3" tall x 6" wide (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 8l Center Cap:100mm Sidearm cap: 45mm OD X OAH:237 X 430 (1 per EA )

All port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene cap. (1 per EA )