Flasks

Description: Glass Ball Spinner Flask Only Size: 1000mL Material: Type 1 Class A Borosilicate Glass Dimensions: 135mm OD x 240mm Overall Height, 250mm across sidearms Two 45mm Sidearms angled 60° offset center 100mm Screw Thread Center Neck Dimpled Bottom Graduations: 100mL to 1000mL, every 100mL – White Ink (Approx Volumes) Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings (1 per EA )

Stainless Steel Shaft Assembly The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and 1965 Spinner Flasks. Sizes range from 100 mL to 36 liters for 1965 spinners and 100 to 3000 mL for 1967 spinner flasks. Material: 316L Stainless Steel and polypropylene compression fitting. Size: 500ml (1 per EA )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 50ml Closure: 18 Dimensions: 50x105mm Stainless steel closure or Kaput closure sold separately (24 per CS )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 2l Closure: 38 Dimensions: 158x295 Stainless steel closure or Kaput closure sold separately (3 per CS )

Manufactured from type 1 class a Borosilicate glass. Media storage and dispensing flask with bottom hose connection, accepts 1/2" tubing. Graduated to approximate volumes and the heavy duty break resistant neck provides an excellent fit for rubber stoppers. Not for vacuum use. Size: 2L Dimensions: 158x290mm (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Break resistant lip to prevent chipping. Specifications: Type 1 Class A Borosilicate Glass Size: 500ml Dimensions: 100x183mm Case Quantity: 12 Baffle Dimensions: 8mm x35° (12 per CS )

Glass Filter Tube Assembly For Omni Vessels. Borosilicate glass construction. (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 1l Sidearm cap: 45mm (included) (1 per EA )

Size: 500ml Seam welded w/ electropolish finish 3-port w/ siphon, fill & vent tubes Includes: 45mm pp cap & silicone gasket Dimensions: 1/4" x 5/32" Longest tube: 2 5/8" at bend Neck: 70mm (1 per EA )

Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube • Thermowell assemblies for 1965 and 1967-style angled sidearm flasks, 3-port • 5/16" od thermowell tube,1/4" siphon and vent tubes • Includes 45mm pp cap and silicone gasket • Seam welded and electropolished • Comes with short paddle: 2 3/4" wide x 1 3/4" tall (a523-731) • Longest tube length:4" (1 per EA )

Adjustable PTFE Microcarrier paddle blades only , 6-8L Paddle dimensions: 1 1/2" x 6 3/8" (1 per EA )

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 500ml Dimensions: 110 x 180mm Sidearm cap: 45mm (1 per EA )

Description: Glass Ball Spinner Flask Only Size: 6000mL Material: Type 1 Class A Borosilicate Glass Dimensions: 204mm OD x 410mm Overall Height, 268mm across sidearms Two 45mm Sidearms angled 30° offset center 100mm Screw Thread Center Neck Dimpled Bottom Graduations: 1L to 6L, every 1L – White Ink (Approx Volumes) Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings (1 per EA )

For use in the disinfectant testing procedure as described in aqac manual. Cylinder ends are lightly glazed. Hard surface carrier test for efficacy of testing of disinfectants. Sizes: 8x8mm (125 per CS )

Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Ideal use for cell culture and reduces shear in delicate cell culture. Blade dimension: 5 3/4 x 2 1/2" Shaft oal: 16 3/4" (1 per EA )

7L bioreactor vessel 200 x 390mm, round bottom. Heavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with Cell Trol II only and speed control module. (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 1l Center Cap:100mm Sidearm cap: 45mm OD X OAH:135 X 250 (1 per EA )

Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. • Thermowell assemblies for 1965 and 1967-style angled sidearm flasks, 3-port • 5/16" od thermowell tube,1/4" siphon and vent tubes • Includes 45mm pp cap and silicone gasket • Seam welded and electropolished • Supply with short widith paddle ( a523-731) • Longest tube length @ curve: 10 7/8" (for thermowell & fill) (1 per EA )

Internal impeller is useful because it decreases risk of contamination thorugh the cap. Has an adjustable shaft to align the paddle with the bottom of the flask. Large paddle promotes increased oxygenation with low shear. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. (1 per EA )

Description: Glass Ball Spinner Flask Only Size: 500mL Material: Type 1 Class A Borosilicate Glass Dimensions: 110mm OD x 170mm Overall Height, 221mm across sidearms Two 45mm Sidearms angled 60° offset center 100mm Screw Thread Center Neck Dimpled Bottom Graduations: 50mL to 500mL, every 50mL – White Ink (Approx Volumes) Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings (1 per EA )

Glass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. Glass shaft ptfe magnet Size: 15-36l CONSIST OF: PTFE MAGNET HOLDER and PTFE COATED MAGNET (1 per EA )

Type 1 class a Borosilicate glass that are designed for maintaining anaerobic conditions. Useful for studies involving methane-producing bacteria, cell culture, drug discovery, and research and development. Specifications: Size: 250ml Neck Finish: #20 Alum Seal Neck. Dimensions: 70mm OD x 138mm OAH, Neck Dimensions: 19.7-20.2mm OD, 13.3-13.6mm ID, Grad. Range: 50mL-200mL, every 50mL, Supply with #20 Septum Stopper & Alum Seal. (12 per CS )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 300ml Closure: 38 Dimensions: 88x170mm Stainless steel closure or Kaput closure sold separately (12 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for all cell culture and media storage purposes. Provides flexible secure seal without a liner. Supplied with gl45 liner-less screw cap and pouring rings. Graduated to approximate volumes. Size: 1L Dimensions: 128x200mm (6 per CS )