Flasks

Adjustable PTFE Microcarrier paddle blades only , 15-36L Paddle dimensions: 1 1/2" x 3 3/8" (1 per EA )

Bell-Flo IOB assembly was designed to be used with the bell-flo vessel with bottom indents and 3 vertical baffles for optimal mixing. Rugged stainless steel ptfe internal bearing impeller assemblies utilize a wing style impeller blade that increases mixing. CENTER CAP:70MM, SIDEARM CAP:32MM, -OAH X OD:130 X 65 (1 per EA )

Description: Glass Ball Impeller Assembly Only Size: 6000mL Screw Cap: Blue PP, 100mm OD x 22.4mm T Cap Seal: Teflon, 95.3mm OD x 10.4mm T Sealing Ring: Blue silicone rubber, 91.4mm OD x 76.2mm ID x 6.1mm T Flex Tube: Soft silicone, 108mm OAL, 0.312” OD x 0.248” ID Magnet Tube: Type 1 Class A Borosilicate Glass, 325mm OAL, 34mm OD ball, houses one cast alnico magnet (1 per EA )

Manufactured from type 1 class a Borosilicate glass, with a round bottom 38x200mm (36 per CS )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 4l Closure: 38 Dimensions: 205x370mm Stainless steel closure or Kaput closure sold separately (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. Specifications: Type 1 Class A Borosilicate Glass Sizes: 1800ml OD X OAH (MM):200 X 157 Case Quantity: 1 (1 per EA )

Stainless Steel Shaft Assembly The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and 1965 Spinner Flasks. Sizes range from 100 mL to 36 liters for 1965 spinners and 100 to 3000 mL for 1967 spinner flasks. Material: 316L Stainless Steel and polypropylene compression fitting. Size: 3l (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 250ml Closure: 38mm Dimensions: 80x160mm (12 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 300ml Closure: 38 Dimensions: 88x170mm (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. Specifications: Type 1 Class A Borosilicate Glass Sizes: 1800ml OD X OAH (MM):200 X 157 Case Quantity: 1 (1 per EA )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 125ml Closure: 25 Dimensions: 66x136mm Stainless steel closure only sold separately (12 per CS )

Glass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. Glass shaft ptfe magnet Size: 1-3l CONSIST OF: PTFE MAGNET HOLDER and PTFE COATED MAGNET (1 per EA )

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 15l Dimensions: 294 x 470mm Sidearm cap: 45mm (1 per EA )

1000mL Bell-Flo™ Spinner Flask Flask Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 135mm OD x 240mm Overall Height, 250mm across sidearms Two 45mm sidearms angled 60° off the centerline One 100mm Screw Thread Center Neck Indented Bottom: Prevents dead spot under impeller Side Baffles: Three equally spaced baffles, 80mm long x 9mm deep Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings (1 per EA )

Description: Glass Ball Impeller Assembly Only Size: 100mL Screw Cap: Blue PP, 70mm OD x 22.4mm T Cap Seal: Teflon, 67.9mm OD x 9.1mm T Sealing Ring: Blue silicone rubber, 66.7mm OD x 47.6mm ID x 4.76mm T Flex Tube: Soft silicone, 41.3mm OAL, 0.312” OD x 0.248” ID Magnet Tube: Type 1 Class A Borosilicate Glass, 82mm OAL, 18mm OD ball, houses one cast alnico magnet (1 per EA )

Description: Glass Ball Impeller Assembly Only Size: 1000mL Screw Cap: Blue PP, 100mm OD x 22.4mm T Cap Seal: Teflon, 95.3mm OD x 10.4mm T Sealing Ring: Blue silicone rubber, 91.4mm OD x 76.2mm ID x 6.1mm T Flex Tube: Soft silicone, 76.2mm OAL, 0.312” OD x 0.248” ID Magnet Tube: Type 1 Class A Borosilicate Glass, 165mm OAL, 28mm OD ball, houses one cast alnico magnet (1 per EA )

Nephelo culture flask is ideal for growing, storing and mixing of aerobic and anaerobic cultures. Supplied with 25mm Bellco stainless steel closures. Specifications: Type 1 Class A Borosilicate Glass Sizes: 300ml Includes: Bellco Stainless Steel Closure (2005 Series) Sidearm Dimensions: 14x130mm Case Quantity: 4 (4 per CS )

8L omni vessel 238 x 445mm, round bottom. Heavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with 200mm large flange headplate. Use with series 500 controllers or with CellTrol (no speed) and OHD or high speed motor system. (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 250ml Center Cap:70mm Sidearm cap: 32mm OD X OAH:85 X 140 (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 500ml Center Cap:70mm Sidearm cap: 45mm (1 per EA )

Micro-Carrier Impeller Assembly Promote optimal growth of suspension and micro-carrier cultures. Impeller height adjusts through compression fitting in cap. Indented bottom up to 1L prevents accumulation of micro-carrier beads under impeller. Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 15-36l Paddle dimensions: 3"x 10" (1 per EA )

Bottom indent and 3 vertical baffles for optimal mixing. Specifications: Material: Type 1 Class A Borosilicate Glass Sidearm Cap: 32mm Center Cap: 70mm Dimensions: 135" X 65" Flask Size: 100ml (1 per EA )

• Material: Type 1 Class A Borosilicate Glass • Dimensions: 63.5mm OD x 135mm Overall Height • Graduations: 20mL – 100mL, every 20mL • Bottom indents and three vertical baffles for optimal mixing • Two 32mm Side arms angled 45° off center for Port Assemblies • One 70mm Screw Thread Center Neck (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 32mm Center cap: 70mm Flask size: 250ml (1 per EA )