Flasks

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. WITHOUT BAFFLES Specifications: Type 1 Class A Borosilicate Glass Sizes: 1800ml OD X OAH (MM):200 X 157 Case Quantity: 1 (1 per EA )

200mm SST 18 port headplate for large flange omni vessels 12@ 1/4" OD 6@ 1/2" OD 1 center for drive motor Large flange headplate assemblies Universal headplates fit 5l thru 36l vessels Corrosion resistant 316l stainless steel Includes red silicone o-ring and 200mm t-bolt clamp o-ring replacements: a554-42 6 each a554-30 12 each a554-13 1 each (1 per EA )

Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. • Thermowell assemblies for 1965 and 1967-style angled sidearm flasks, 3-port • 5/16" od thermowell tube,1/4" siphon and vent tubes • Includes 45mm pp cap and silicone gasket • Seam welded and electropolished • Supply with short width paddle; a523-1244 • Longest tube length: 12 3/4" for both thermowell & fill tube (1 per EA )

Adjustable PTFE Microcarrier paddle blades only , 1-3L Paddle dimensions: 1 1/2" x 4" (1 per EA )

Stainless Steel Shaft Assembly The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and 1965 Spinner Flasks. Sizes range from 100 mL to 36 liters for 1965 spinners and 100 to 3000 mL for 1967 spinner flasks. Material: 316L Stainless Steel and polypropylene compression fitting. Size: 6-8l (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass with rigidly controlled baffle angles and depths. The 3 side baffles are used to promote optimal oxygen transfer while reducing vortex formation. Has a break resistant lip to resist chipping and is designed for use with orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 2L Dimensions: 158x290mm Case Quantity: 2541-02000: 3 (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Break resistant lip to prevent chipping. Specifications: Type 1 Class A Borosilicate Glass Size: 300ml Dimensions: 88x150mm Case Quantity: 12 Baffle Dimensions: 7mm X 35° (12 per CS )

Description: 100mL Stainless Steel Replacement Assembly This assembly consists of; SST shaft, glass impeller shaft bearing, silicone tubing & compression fitting. Specifications of SST Shaft: Material: 316L SST with Electroplish Finish Ra Finish: 32 micro inch or better Dimensions: 6.35mm (1/4”) OD x 120.6mm (4 ¾”) long Specifications of Glass Bearing: Material: Type 1 Class A Borosilicate Glass Dimensions: 9mm OD x 12mm long turn down to 6.35mm end Specifications of Silicone Tubing: Material: Clear Silicone Tubing, FDA approve Dimensions: 4.9mm OD x 2.6mm ID x 15.9mm long to fit shaft & bearing Specifications Compression Fitting: Material: White Polypropylene Dimensions: 6.35mm ID Compression fitting to accept 6.35mm (1/4”) OD SST Shaft (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for culture aerobic & anaerobic organisms, media storage and mixing. Deep skirted screw caps protect against contamination. Supplied with rubber line black phenolic caps and graduated to approximate volumes. Size: 125mL Cap: 24-415 Dimensions: 66x125mm (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 125mL Closure Sizes: 25mm OD x OAH: 66 x 136mm DeLong Style Neck Case Quantity: 2543-00125: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. Specifications: Type 1 Class A Borosilicate Glass Sizes: 2800ml OD X OAH (MM):210 X 225 Case Quantity: 1 (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. 3 Side baffles positioned at 120 degree and 3 bottom baffles offset from the side baffles. GL45 polypropylene membrane cap has a sealed in 0.2u PTFE membrane. Cap can be tightened during autoclaving. Specifications: Type 1 Class A Borosilicate Glass Includes Polypropylene Membrane Cap And Pouring Ring Size: 500ml Dimensions: 100x156mm Case Quantity: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are ideal for preliminary fermentation and bacterial growth studies. They are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Closures sold separately. Specifications: Type 1 Class A Borosilicate Glass Size: 500ml Dimensions: 100x205mm Closure Sizes: 38 Baffle Dimensions: 6mm DP X 35° Case Quantity: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are ideal for preliminary fermentation and bacterial growth studies. They are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Closures sold separately. Specifications: Type 1 Class A Borosilicate Glass Size: 1L Dimensions: 128x235mm Closure Sizes: 38 Baffle Dimensions: 8mm DP X 35° Case Quantity: 6 (6 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 3L Closure Sizes: 38mm OD x OAH: 184 x 340mm DeLong Style Neck Case Quantity: 2453-03000: 3 (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are ideal for preliminary fermentation and bacterial growth studies. They are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Closures sold separately. Specifications: Type 1 Class A Borosilicate Glass Size: 50ml Dimensions: 50x105mm Closure Sizes: 18 Baffle Dimensions: 4 X 35mm Case Quantity: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Break resistant lip to prevent chipping. Specifications: Type 1 Class A Borosilicate Glass Size: 1800ml Stopper Size: 10 Case Quantity: 3 (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are ideal for preliminary fermentation and bacterial growth studies. They are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Closures sold separately. Specifications: Type 1 Class A Borosilicate Glass Size: 125ml Dimensions: 66x136mm Closure Sizes: 25 Baffle Dimensions: 4mm DP X 35° Case Quantity: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. 3 Side baffles positioned at 120 degree and 3 bottom baffles offset from the side baffles. GL45 polypropylene membrane cap has a sealed in 0.2u PTFE membrane. Cap can be tightened during autoclaving. Specifications: Type 1 Class A Borosilicate Glass Includes Polypropylene Membrane Cap And Pouring Ring Size: 250ml Dimensions: 80x117mm Case Quantity: 12 (12 per CS )

500mL Bell-Flo™ Complete Flask Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 110mm OD x 175mm Overall Height, 214mm across sidearms Two 45mm sidearms angled 45° off the centerline One 70mm Screw Thread Center Neck Indented Bottom: Prevents dead spot under impeller Side Baffles: Three equally spaced baffles, 45mm long x 6mm deep Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings Internal Overhead Bearing Assembly Specifications: Consists of screw cap, cap seal, sealing ring, compression washer, ball bearing spacer, ball bearing, bearing thimble, magnet, o-ring, magnet holder, shaft, & paddle 70mm PP Blue Screw Cap: 82.6mm OD x 22.2mm tall PTFE Cap Seal: 66.7mm OD x 24.6mm long Blue Silicone Sealing Ring: 66.7mm OD x 47.6mm ID x 4.8mm thick White Silicone Compression Washer: 27.0mm OD x 12.7mm ID x 1.6mm thick PTFE Ball Bearing Spacer: 19.1mm OD x 12.7mm ID x 22.4mm deep PBT & SST Ball Bearing: 19.1mm OD x 6.4mm ID x 7.1mm deep PTFE Bearing Thimble: 31.8mm OD x 19.1mm ID x 38.1mm long PTFE Magnet: 9.5mm OD x 41.3mm long Silicone O-ring: 7.9mm OD x 4.8mm ID PTFE Magnet Holder: 19.1mm OD x 95.3mm long 316L SST Shaft: 6.4mm OD x 130.2mm long PTFE Paddle: 54.0mm wide x 95.3 long x 1.6mm thick (1 per EA )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 250ml Closure: 38 Dimensions: 80x160 Stainless steel closure or Kaput closure sold separately (12 per CS )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 6l Closure: 38 Dimensions: 235x410mm Stainless steel closure or Kaput closure sold separately (3 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for all cell culture and media storage purposes. Provides flexible secure seal without a liner. Supplied with gl45 liner-less screw cap and pouring rings. Graduated to approximate volumes. Size: 500mL Dimensions: 100x156mm (12 per CS )

Manufactured from type 1 class a Borosilicate glass. Media storage and dispensing flask with bottom hose connection, accepts 1/2" tubing. Graduated to approximate volumes and the heavy duty break resistant neck provides an excellent fit for rubber stoppers. Not for vacuum use. Size: 4L Dimensions: 205x355mm (3 per CS )