Flasks

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 1l Closure: 38 Dimensions: 128x235mm Stainless steel closure or Kaput closure sold separately (6 per CS )

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 500ml Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately (1 per EA )

Designed for growing insect cell cultures such as SF9 and SF21 cells. The system comes complete with all accessories needed to grow your insect culture line for expression Includes: –7785-D2005 Digital 5-Position Magnetic Stirrer 115V –1965-03000 Micro-Carrier Spinner Flask Complete 3L –1965-20003R 2-Port Assembly 3L –7808-10004 Gas Blending Stand –7725-00120 Air Supply Pump 115V –7800-10050 Silicone Tubing 1/4” ID (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 25ml Closure: 18mm Dimensions: 40x96mm (24 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Break resistant lip to prevent chipping. Specifications: Type 1 Class A Borosilicate Glass Size: 250ml Dimensions: 80x140mm Case Quantity: 12 Baffle Dimensions: 6mm x35° (12 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 3l Closure: 38 Dimensions: 184x340 (3 per CS )

Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube • Thermowell assemblies for 1965 and 1967-style angled sidearm flasks, 3-port • 5/16" od thermowell tube,1/4" siphon and vent tubes • Includes 45mm pp cap and silicone gasket • Seam welded and electropolished finish - outside only • All tubes: 316l sst • Longest tube length @ curve: 10 1/2" (1 per EA )

Manufactured from 1 Borosilicate glass Accepts bellco glass inc stainless steel kap-uts closures Closure size 38mm (36 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 125ml Closure: 25 Dimensions: 66x136mm (12 per CS )

Manufactured for type 1 class a Borosilicate glass. Ideal for growing, storing, and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes. Size: 25ml Closure: 18 Dimensions: 40x96mm Stainless steel closure or Kaput closure sold separately (24 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. Specifications: Type 1 Class A Borosilicate Glass Sizes: 2800ml OD X OAH (MM):210 X 225 Case Quantity: 1 (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. Specifications: Type 1 Class A Borosilicate Glass Sizes: 1800ml OD X OAH (MM):200 X 157 Case Quantity: 1 (1 per EA )

Round bottom type 1 class a Borosilicate glass. Includes 38mm phenolic screw cap. 38x200mm. (36 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for culture aerobic & anaerobic organisms, media storage and mixing. Deep skirted screw caps protect against contamination. Supplied with rubber line black phenolic caps and graduated to approximate volumes. Size: 1L Cap: 38-415 Dimensions: 128x220mm (6 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for culture aerobic & anaerobic organisms, media storage and mixing. Deep skirted screw caps protect against contamination. Supplied with rubber line black phenolic caps and graduated to approximate volumes. Size: 50mL Cap: 24-415 Dimensions: 50x85mm (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. WITHOUT BAFFLES Specifications: Type 1 Class A Borosilicate Glass Sizes: 2800ml OD X OAH (MM):210 X 225 Case Quantity: 1 (1 per EA )

Manufactured from type 1 class a Borosilicate glass. For spinner flasks 15l to 36l Dimensions: 9mm x 500mm long (1 per EA )

Seam welded with electropolished finish 3-port with siphon, fill and vent tubes Includes 45mm pp cap and silicone gasket 500ml with 100mm cap Longest tube: 1.5" (1 per EA )

Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 6-8l Paddle dimensions: 3"x 7 3/4" (1 per EA )

3000mL Bell-Flo™ Internal Overhead Bearing Assembly Internal Overhead Bearing Assembly Specifications: Consists of screw cap, cap seal, sealing ring, compression washer, ball bearing spacer, ball bearing, bearing thimble, magnet, o-ring, magnet holder, shaft, & paddle 100mm PP Blue Screw Cap: 82.6mm OD x 22.4mm tall PTFE Cap Seal: 95.3mm OD x 25mm long Red Silicone Sealing Ring: 86mm OD x 76.2mm ID x 6.1mm thick White Silicone Compression Washer: 27.0mm OD x 12.7mm ID x 1.6mm thick PTFE Ball Bearing Spacer: 19.1mm OD x 12.7mm ID x 22.4mm deep PBT & SST Ball Bearing: 19.1mm OD x 6.4mm ID x 7.1mm deep PTFE Bearing Thimble: 31.8mm OD x 19.1mm ID x 38.1mm long PTFE Magnet: 12.7mm OD x 76.2mm long Silicone O-ring: 7.9mm OD x 4.8mm ID PTFE Magnet Holder: 19.1mm OD x 177.8mm long 316L SST Shaft: 6.4mm OD x 190.5mm long PTFE Paddle: 82.6mm wide x 177.8mm long x 1.6mm thick (1 per EA )

3000mL Bell-Flo™ Complete Flask Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 165mm OD x 290mm Overall Height, 252.7mm across sidearms Two 45mm sidearms angled 53° off the centerline One 100mm Screw Thread Center Neck Indented Bottom: Prevents dead spot under impeller Side Baffles: Three equally spaced baffles, 100mm long x 9mm deep Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings Internal Overhead Bearing Assembly Specifications: Consists of screw cap, cap seal, sealing ring, compression washer, ball bearing spacer, ball bearing, bearing thimble, magnet, o-ring, magnet holder, shaft, & paddle 100mm PP Blue Screw Cap: 82.6mm OD x 22.4mm tall PTFE Cap Seal: 95.3mm OD x 25mm long Red Silicone Sealing Ring: 86mm OD x 76.2mm ID x 6.1mm thick White Silicone Compression Washer: 27.0mm OD x 12.7mm ID x 1.6mm thick PTFE Ball Bearing Spacer: 19.1mm OD x 12.7mm ID x 22.4mm deep PBT & SST Ball Bearing: 19.1mm OD x 6.4mm ID x 7.1mm deep PTFE Bearing Thimble: 31.8mm OD x 19.1mm ID x 38.1mm long PTFE Magnet: 12.7mm OD x 76.2mm long Silicone O-ring: 7.9mm OD x 4.8mm ID PTFE Magnet Holder: 19.1mm OD x 177.8mm long 316L SST Shaft: 6.4mm OD x 190.5mm long PTFE Paddle: 82.6mm wide x 177.8mm long x 1.6mm thick (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 32mm Center cap: 70mm Flask size: 250ml (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 1l Closure: 38 Dimensions: 128x235mm (6 per CS )

Manufactured from type 1 class a Borosilicate glass. Media storage and dispensing flask with bottom hose connection, accepts 1/2" tubing. Graduated to approximate volumes and the heavy duty break resistant neck provides an excellent fit for rubber stoppers. Not for vacuum use. Size: 250mL Dimensions: 80x140mm (6 per CS )