Buffers and Solutions

Perchloric Acid, 0.1 N Solution in Glacial Acetic Acid, (USP Volumetric Solution) is an inorganic acid dissolved in an organic solvent. It's main characteristic is that it is stronger than both sulfuric and nitric acid. It is also used for its super acid properties and also as an etchant for certain metals.

(1 per EA )

Hydrochloric Acid, 3 N Solution is a colorless, clear, highly corrosive, highly pungent solution of hydrogen chloride in water. As an monoprotic acid and one of the six common strong mineral acids it is the least likely to be subject to an oxidation-reduction reaction. Hydrochloric acid is frequently used during chemical analysis to prepare samples for analysis. It reacts with basic compounds, turning them into dissolved chlorides that can then undergo analysis.

(1 per EA )

Potassium Iodide, 10 Percent (w/v) Aqueous Solution is refered to by the chemical formula KI and is an inorganic compound. Used as a component in film photography before the discovery of silver iodide, it is also used in the electrolyte of dye sensitized solar cells. KI is also used as an emergency blockade of radio-iodine, a common form of radiation poisoning.

(1 per EA )

Magnesium Chloride, 51 Percent (w/v) Aqueous Solution, For Cyanide, APHA, is a typical ionic halide that serves as a precursor to other magnesium compounds. Spectrum solutions utilize the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Sodium Thiosulfate, 0.01 N Aqueous Solution (1 per EA )

Mercuric Nitrate, 0.01 N Aqueous Solution, also known as mercury(II) nitrate solution, acts as an oxidizer in analytical chemistry applications. Spectrum solutions utilize the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Acetic Anhydride, Reagent, ACS, or ethanoic anhydride as it is otherwise known is a colorless, strong smelling liquid chemical compound that is the simplest isolatable acid anhydride and commonly used as a reagent for organic synthesis. Mainly used for acetylations, its main use is for the conversion of cellulose to cellulose acetate and in the synthesis of aspirin. As an ACS grade Reagent, Spectrum Chemical manufactured acetic anhydride is used as the quality standard against which other substances are graded and has met the toughest regulatory standards for quality and pureness.

(1 per EA )

Phenolphthalein, 1 Percent (w/v) Indicator Solution in 70 Percent Alcohol is often used as a indicator in titrations and is colorless in acidic solutions and pink in basic solutions. Spectrum solutions utilize the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Silver Nitrate, 0.1N, Standardized Solution is an inorganic aqueous solution. It is used to titrimetrically determine purity of products containing halides by the direct titration with standardized silver nitrate solution.

(1 per EA )

Bromocresol Green, 0.1 Percent (w/v) Aqueous Indicator Solution is used as a pH indicator and as a tracking dye for DNA agarose gel electrophoresis. Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Sodium Hydroxide, 5 N Aqueous Solution is a standard solution of Caustic soda ideally suited for laboratory titrimetric techniques. You can rely on the quality of LabChem analytical test solutions for lot-to-lot reproducibility.

(1 per EA )

EDTA Disodium, 0.1 M Solution, is also referred to as Ethylenediaminetetraacetic acid. The EDTA is extremely good at binding metals. This property is useful in complexometric titrations for the determination of metal levels.

(1 per EA )

Hydrochloric Acid, 1.0 N Aqueous Solution, is a colorless and clear, highly corrosive, highly pungent solution of hydrogen chloride in water. As an monoprotic acid and one of the six common strong mineral acids it is the least likely to be subject to an oxidation-reduction reaction. Hydrochloric acid is also frequently used during chemical analysis to prepare samples for analysis. It reacts with basic compounds, turning them into dissolved chlorides that can then undergo analysis.

(1 per EA )

Starch Indicator, 1 Percent (w/v) Aqueous Solution, Stabilized, is used in chemistry as an indicator for redox titrations where triiodide is present. These titrations are typically useful in volumetric analysis for determination copper(II), antimony (V), chlorate, hydrogen peroxide, dissolved oxygen, sulfite and sulfide levels.

(1 per EA )

Hydrochloric Acid, 0.1 N, Aqueous Solution is a colorless, clear, highly corrosive, highly pungent solution of hydrogen chloride in water. As an monoprotic acid and one of the six common strong mineral acids it is the least likely to be subject to an oxidation-reduction reaction. Hydrochloric acid is frequently used during chemical analysis to prepare samples for analysis. It reacts with basic compounds, turning them into dissolved chlorides that can then undergo analysis.

(1 per EA )

Red-Four (TM) Buffer Solution, pH 4.01 +/- 0.01 @ 25 DEG C, Color-coded RED, Reference Standard (1 per EA )

Blue-Ten (TM) Buffer Solution, pH 10.00, (+/-0.01 @ 25 DEG C)Color-coded BLUE, Reference Standard (1 per EA )

Sodium Hydroxide, 5 Percent (w/v) Solution - Spectrum solutions utilize the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Sodium Chloride, 0.85 Percent (w/v) Solution, Normal Saline - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Sulfuric Acid, 20 Percent (v/v) Solution - Spectrum utilizes the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Hydrochloric Acid, 0.5 N, Aqueous Solution is a colorless and clear, highly corrosive, highly pungent solution of hydrogen chloride in water. As an monoprotic acid and one of the six common strong mineral acids it is the least likely to be subject to an oxidation-reduction reaction. Hydrochloric acid is also frequently used during chemical analysis to prepare samples for analysis. It reacts with basic compounds, turning them into dissolved chlorides that can then undergo analysis.

(1 per EA )

Benzene, Reagent, ACS is an organic compound that is naturally found in crude oil. This colorless and highly flammable liquid is an important part of gasoline due to its high octane number. In the laboratory, benzene is used mainly as a solvent. As an ACS grade reagent, Spectrum Chemical manufactured compound is used as the quality standard against which other substances are grade and has met the toughest regulatory standards for quality and pureness.

(1 per EA )

Buffer Rinse Solution, In Portable Pouch, a mixture of acid and its conjugate base, is used to prevent changes in the pH of a solution. These solutions are mainly utilized to keep pH at a constant value in a variety of chemical applications. Spectrum solutions utilize the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(20 per CS )

Kauri-Butanol Solution is used for the determination of the relative solvent power of hydrocarbon solvents (ASTM D1133). (1 per EA )