Buffers and Solutions

Sodium Hydroxide, 50 Percent (w/w), Solution, Reagent is commonly known as Caustic soda. This inorganic compound is water soluble, as well as in ethanol and methanol. The dissolution of solid Sodium Hydroxide in water creates a highly exothermic reaction. The concentrated solution is suitable for further dilution or as a raw material feedstock in chemical synthetic transformations. As a Reagent grade item, Spectrum Chemical manufactured Sodium Hydroxide met the toughest regulatory standards for quality and purity.

(1 per EA)

Hydrogen Peroxide, 3 Percent Solution, Reagent, is the simplest peroxide, a strong oxidizer that appears as a clear and slightly viscous liquid. Its oxidizing properties are so strong that it is considered a highly reactive oxygen species. Due to it being a weak acid it can form hydroperoxide or peroxide salts. One of its biggest uses is in the treatment of drinking water, removing odors, organic materials and the amount of Hydrogen sulfides and Iron. Its reagent grade means it is used as the standard against which other compounds are graded in analytical testing labs.

(1 per EA )

Eosin Y TS, (U.S.P. Test Solution) is a ready-for-use solution for the purpose of conducting USP, National Formulary and assay tests and is prepared according to the specifications of the USP Pharmacopeial Convention.

(1 per EA )

Dodecyltrimethylammonium Chloride, 50 Percent Solution in Alcohol, High Purity is a quaternary ammonium compound (QAC) commonly used as a cationic surfactant. The High Purity grade denotes that this chemical is the highest quality commercially available. Spectrum Chemical manufactured High Purity grade products meet the toughest regulatory standards for quality and purity.

(1 per EA)

Sodium Silicate, 40 DEG Be Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA)

Sulfuric Acid, 2.0 N Solution - Spectrum utilizes the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Sulfuric Acid, 1.00 N Solution, APHA - As an APHA certified solution, this item is meets the ASTM D1209 standards and can be used in water and waste water treatment facilities to determine the concentration of dissolved and particulate materials. Spectrum Chemical manufactured APHA grade products meet the toughest regulatory standards for quality and purity.

(1 per EA )

Sodium Hydroxide, 30 Percent (w/v) Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Potassium Fluoride, 50 Percent (w/v) Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Sodium DL-Lactate Solution, 60 Percent (w/w), USP is used for the restoration of extracellular fluid and electrolytes balances. All Spectrum Chemical USP products are manufactured, packaged and stored under current Good Manufacturing Practices (cGMP) per 21CFR part 211 in FDA registered and inspected facilities.

(1 per EA )

Glyoxal, 40 Percent in Water is used as a crosslinker for starch-based products in the coated paper and textile industry, as well as, being used as a solubilizer and crosslinker in polymer chemistry.

(1 per EA )

Sulfuric Acid, 0.2 N Solution - Spectrum utilizes the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Phenol, 5 Percent (w/v) Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Hydrogen Peroxide, 30 Percent, Solution, Reagent is the simplest peroxide, a strong oxidizer that appears as a clear and slightly viscous liquid. Its oxidizing properties are so strong that it is considered a highly reactive oxygen species. Due to it being a weak acid, it can form thermally unstable hydroperoxides. One of its biggest uses is in the treatment of drinking water, removing odors, organic materials and the amount of Hydrogen sulfides and Iron. As a Reagent grade, Spectrum Chemical manufactured Hydrogen Peroxide is a high quality chemical suitable for use in many analytical and general laboratory applications.

(1 per EA )

Iodine, 0.1 N Solution, USP Volumetric Solution is a ready-to-use chemical solution used in the analysis of many finished USP grade products. Spectrum Chemical USP products are manufactured, packaged and stored under current Good Manufacturing Practices (cGMP) per 21CFR part 211 in FDA registered and inspected facilities.

(6 per CS )

Polyacrylic Acid Sodium Salt, 45 Percent Solution, also known as PAAc or Acrysol, is an anionic polymer used in disposable diapers and as thickening and emulsifying agents in the pharmaceutical and cosmetic industries. Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA)

Ammonium Hydroxide, 6.0 N Solution, is a solution of ammonia in water. Aqueous ammonia, as it's otherwise known is used as a complexant and base in qualitative inorganic analysis. It becomes a deep blue color with copper solutions. Used to dissolve silver oxide residues, such as the ones formed from Tollens' reagent, it is also commonly used in numerous cleaning agents, such as window cleaning formulas as well as a complexant that is manufactured to parts-per-billion trace impurities and has been used in the semiconductor industry to dissolve heavy or precious metal components.

(1 per EA )

Sodium Hypochlorite, Solution, 12 Percent Available Chlorine, Reagent - The Reagent grade denotes that this chemical is the highest quality commercially available and that the American Chemical Society has not officially set any specifications for this material. Spectrum Chemical manufactured Reagent grade products meet the toughest regulatory standards for quality and purity.

(6 per CS )

Silver Nitrate, SVS Concentrate, To Prepare 0.0141 N Solution - Spectrum's Standard Volumetric Solution (SVS) concentrate when diluted to 1 liter will yield a 0.0141 N solution. Simply dilute the desired Standard Volumetric Solution concentrate to the specified volume (carefully following instructions provided with the package) and the resulting solution will have an exact Normality within 0.1%. Spectrum Standard Volumetric Solution concentrates are relied upon for fast, accurate results in life sciences and pharmaceutical quality control applications.

(1 per EA )

Sodium Hydroxide, 50 Percent (w/w), Solution, Reagent is commonly known as Caustic soda. This inorganic compound is water soluble, as well as in ethanol and methanol. The dissolution of solid Sodium Hydroxide in water creates a highly exothermic reaction. The concentrated solution is suitable for further dilution or as a raw material feedstock in chemical synthetic transformations. As a Reagent grade item, Spectrum Chemical manufactured Sodium Hydroxide met the toughest regulatory standards for quality and purity.

(4 per CS )

Buffer Solution, pH 1.68 +/- 0.02 @ 25 DEG C, Reference Standard is an inorganic solution in water. Spectrum solutions utilize the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum's own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(6 per CS )

Sodium Hypochlorite, Solution, 12 Percent Available Chlorine, Reagent - The Reagent grade denotes that this chemical is the highest quality commercially available and that the American Chemical Society has not officially set any specifications for this material. Spectrum Chemical manufactured Reagent grade products meet the toughest regulatory standards for quality and purity.

(4 per CS )

Hydrogen Peroxide Solution, 30 Percent, Reagent, ACS, is the simplest peroxide, a strong oxidizer that appears as a clear and slightly viscous liquid. Its oxidizing properties are so strong that it is considered a highly reactive oxygen species. Due to it being a weak acid it can form hydroperoxide or peroxide salts. One of its biggest uses is in the treatment of drinking water, removing odors, organic materials and the amount of Hydrogen sulfides and Iron. As an ACS grade Reagent, Spectrum Chemical manufactured Hydrogen Peroxide is used as the quality standard against which other substances are graded and has met the toughest regulatory standards for quality and pureness.

(4 per CS )

Sodium Silicate, 40 DEG Be Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(4 per CS )