Microcentrifuge

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

G-Tube Premium Flat Top Microcentrifuge Tube 0.6mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 30000xg forces. Textured writing surface on top of caps. Non-wettable walls. Yellow color. (500 per PK)

Flat Top Microcentrifuge Tube 0.6mL. Flat top lid forms an extra-tight seal that will not come open during processing. With textured writing surface on top of the caps and needle access. Walls are non-wettable preventing liquids from adhering to the sides. (500 per PK)

G-Tube Premium Flat Top Microcentrifuge Tube 0.6mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 30000xg forces. Textured writing surface on top of caps. Non-wettable walls. Lavender color. (500 per PK)

G-Tube Premium Flat Top Microcentrifuge Tube 2.0mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 30000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 2.0mL. Yellow color. (500 per PK)

G-Tube Premium Flat Top Microcentrifuge Tube 2.0mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 30000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 2.0mL. Green color. (500 per PK)

2.0mL G-Tube, Flat Top Microcentrifuge Tube, Amber, PK500 (500 per PK)

G-Tube Premium Flat Top Microcentrifuge Tube 2.0mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 30000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 2.0mL. Rainbow color. (500 per PK)

Snap-Cap Microcentrifuge Tube Volume: 1.8mL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: natural. (1000 per PK)

Snap-Cap Microcentrifuge Tube Volume: 1.8mL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: yellow. (1000 per PK)

MCT POLYPRO BLU 1.8ML 1000/PKBio Plas 1.8mL microcentrifuge tube blue. (1000 per PK)

Siliconized G-Tube Flat-Top Microcentrifuge Tube Size: 0.6mL. Safe sample deposit. Withstands 30000xg forces. Molded from siliconized virgin polypropylene with extremely low surface adhesion and maximum sample recovery. Color: natural. (500 per PK)

Flat Top Microcentrifuge Tube 1.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 1.5mL. Yellow color. (500 per PK)

Flat Top Microcentrifuge Tube 1.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 1.5mL. Green color. (500 per PK)

Flat Top Microcentrifuge Tube 1.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 1.5mL. Amber color. (500 per PK)

Flat Top Microcentrifuge Tube 1.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 1.5mL. Orange color. (500 per PK)

Flat Top Microcentrifuge Tube 1.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 1.5mL. Lavender color. (500 per PK)

64 PLAC MIC RAC POL NAT. PK5Bio Plas 64-well micro tube rack natural for Bio Plas 0.5mL 1.5mL and 2.0mL screw cap and snap cap microcentrifuges. (5 per PK)

64 PLAC MIC RAC POL ASRT PK5Bio Plas 64-well micro tube rack assorted colors for Bio Plas 0.5mL 1.5mL and 2.0mL screw cap and snap cap microcentrifuges. (5 per PK)

64 PLAC MIC RAC POL ORAN PK5Bio Plas 64-well micro tube rack orange for Bio Plas 0.5mL 1.5mL and 2.0mL screw cap and snap cap microcentrifuges. (5 per PK)

Siliconized G-Tube Flat-Top Microcentrifuge Tube Size: 0.6mL. Safe sample deposit. Withstands 30000xg forces. Molded from siliconized virgin polypropylene with extremely low surface adhesion and maximum sample recovery. Sterile. Individually wrapped. Color: natural. (250 per PK)

Siliconized 1.5mL G-Tube, Flat Top Microcentrifuge Tube - Sterile - 50/Bag-5 Bags/Pk (250 per PK)

Siliconized 2.0mL G-Tube, Flat Top Microcentrifuge Tube - Sterile - 50/Bag-5 Bags/Pk (250 per PK)

2.0ML SIL ST GT FLTP MC N250PKBio Plas siliconized flat top microcentrifuge tube 2.0mL sterile. (250 per PK)