Microcentrifuge

Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Red, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag, PK500 (500 per PK)

Get organized with this fun, interlocked rack. Rotate each of the four modules independently to configure for the tubes that you want to use. Made from polypropylene Suitable for a massive variety of culture, centrifuge, micro centrifuge, round, flat or conical bottomed tubes Polypropylene rack maintains its orientation until you twist it again. Two versions to cover smaller and larger tube requirements Tubes: 50 mL Wells:2 Well Dia: 29 mm Tubes: 10-15 mL Wells: 8 Well Dia: 20 mm Tubes: 15-20 mL Wells: 6 Well Dia: 16 mm Tubes: 10-13 mL Wells: 10 Well Dia: 13.5 mm Dimensions: 8.81 x 4.33 x 4.33 in (22.4 x 11 x 11 cm) 1/pk Color: purple, blue, green, yellow Autoclavable (5 per PK )

An efficient and economical alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. (200 per PK)

5mL Macro Centrifuge Tube, Snap-Pop, Purple, Non-sterile (100 per CS )

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

5mL Flat Top Microcentrifuge Tube (4 bags of 50 tubes per pack), Assorted*, PK200, CS1000 (1000 per CS)

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand Color tubes allow for quick sample identification, or to customize workflows (500 per CS )

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand Color tubes allow for quick sample identification, or to customize workflows (500 per CS )

Tube 2mL stand clr-tube/cap 10-BG/500 (5000 per CS )

Translucent and Opaque Cap O-rings ensure leak-proof seal, and are a highly visible contrasting color All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)

Rack for 1.5mL and 2.0mL Microcentrifuge Tubes, Reinforced PP, 20-Place, White, EA1 (1 per EA)

Reversible Rack with Cover for Microcentrifuge Tubes, 96-Place for 1.5mL and 2.0mL and Reverse Side is 96-Place for 0.2mL and 0.5mL Tubes, Blue, 5/Pack (25 per CS)

Wireless MicroTube Rack with Handles for 1.5mL and 2.0mL Microcentrifuge Tubes, 96-Place, White (4 per CS)

Rack for 1.5mL and 2.0mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Green, EA1 (1 per EA)

Microtube Rack 24 x 1.5/2mL Tubes, Blue (8 per PK )

These polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical rea (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

By popular demand for researchers, as well as diagnostic / reagent packaging applications, MTC’s O-ring screw caps are now available in single color packs of 1000. Order now in blue, green, orange, red, yellow, or natural color. (1000 per CS )

Two-tier polypropylene racks hold up to 100 of 1.5ml microcentrifuge tubes. Racks are autoclavable and can be used in water baths or freezers. A molded-in alphanumeric index, plastic makes sample identification easy. Racks are stackable and have a 2-3/4" x 1" labeling area on two sides. (6 per PK )

Tube Micro Centrifuge, PP 0.5mL (1000 per CS)

High temperature resistivity range–shatter/crack resistant and ideal for boiling Easy 3/4 turn to open and close Caps are available separately in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match Grip band tubes feature ribs that provide exceptional gripping surface and lessen movement during centrifugation (1000 per CS)