Centrifuge Tubes

Five-O™ 5mL Screw-cap MacroTube®, sterile, w/ attached screw caps in foam racks, Opaque Black, 500/cs (500 per CS )

Centrifuge Tube, 15mL, Attached Red Screw Cap, PS, Printed Graduations, STERILE, 25/Bag, 20 Bags/Unit, CS500 (500 per CS)

Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Assorted Colors, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag, PK500 (500 per PK)

Freestanding 50ml centrifuge tubes are available for use in those applications where a rack is not available. (500 per CS )

Microcentrifuge tube rack, holds 20, 1.5mL tubes, pack of 1 (1 per EA)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per CS)

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand (1000 per CS)

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand 1.5mL opaque black tube protects light sensitive compounds (1000 per CS)

5mL Screw-cap MacroTube®, sterile, w/ attached screw caps in foam racks, 500/cs (500 per PK )

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

Rack for 0.5mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Clear (8 per CS)

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand Color tubes allow for quick sample identification, or to customize workflows (500 per CS )

Flat Top Microcentrifuge Tube 1.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 1.5mL. Rainbow color. (500 per PK)

Translucent and Opaque Cap O-rings ensure leak-proof seal, and are a highly visible contrasting color All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)

Ergonomic flip top cap is designed for single handed operation Graduations are printed in bold, easy-to-read black ink and are accurate to +/-2% Large white marking area provides excellent contrast for identification Easy to write on flat surface polyethylene (HDPE) caps feature integrated leak-proof seal Tubes include graduations molded into the conical bottom, ideal for pellet viewing and small volume quantification Convenient zip-closure bag is a practical alternative to folding and taping opened bags (500 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

Manufactured and packaged using an improved process, while maintaining standards Easy to write on flat surface polyethylene (HDPE) caps feature integrated leak-proof seal Graduations are printed in bold, easy-to-read black ink and are accurate to +/-2% Tubes include graduations molded into the conical bottom, ideal for pellet viewing and small volume quantification Large white marking area provides excellent contrast for identification Convenient zip-closure bag is a practical alternative to folding and taping opened bags (500 per CS)

Premium Grip Cap features molded TPE sealing rings which ensure O-ring will never slip out of place; striped TPE grips on cap edge enable secure handling under all conditions Caps are available in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)

TUBE ONLY, 50mL Centrifuge Tube, Sterile (500 per CS )

MICROCENT.TUBES 0.5ML ORNPK500Bio Plas flat top microcentrifuge tube 0.5 ml orange. (500 per PK)

5mL Flat Top Microcentrifuge Tube (4 bags of 50 tubes per pack), Assorted*, PK200 (200 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per CS)