Centrifuge Tubes

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam Dnase, Rnase and pyrogen free (500 per CS )

Made from virgin polypropylene Reusable and economic Non-sterilized (50 per CS )

USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (2000 per CS )

Made from virgin polypropylene Reusable and economic Non-sterilized (50 per CS )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam Dnase, Rnase and pyrogen free (500 per CS )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam Dnase, Rnase and pyrogen free (250 per CS )

USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (10000 per CS )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam Dnase, Rnase and pyrogen free (500 per CS )

30ml Centrifuge Tube, Self-Standing, Bulk, standard, sterile 25/pk, 500/cs (500 per CS )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam Dnase, Rnase and pyrogen free (500 per CS )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (5000 per CS )

Made of USP VI polypropylene. Autoclave at 120C /15 Ib. Non-pyrogenic, Dnase/Rnase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (102 per CS )

USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (2000 per CS )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (4000 per CS )

The vial body is made of medical-grade cryogenic polypropylene (PP), which meets USP Class-6 standards, so that the vial is recommended to be used in -196 liquid nitrogen phase. Dnase/Rnase free, non-endotoxin. Electron beam sterilization, SAL = 10 -6. The product meets the SBS standard and provides an effective safety guarantee and management for biological sample libraries and other warehouses of various chemicals and biological products stored at low temperatures. (40 per CS )

Sterilized by E-beam, SAL=10-6. Cell culture plates are made of high clarity, 100% virgin polystyrene. Vacuum Plasma tissue culture treatment. Clear lot number for batch traceability. Non-Pyrogenic, DNase/Rnase free. Innovative edge design for convenient sample loading. A rich selection of matching plates: 6-well, 12-well, 24-well. Low protein binding to ensure accurate results. Passed the USP VI toxicity test. Compatible with most solvents used for fixing and staining. (1 per EA)

USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (7500 per CS )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam Dnase, Rnase and pyrogen free (500 per CS )

Sterilized by E-beam, SAL=10-6. High clarity, 100% virgin polystyrene. “TC” refers to vacuum plasma tissue culture treatment. Clear lot number for batch traceability. Markings of well coordinates available for 12, 24, 48, 96 and 384 well plates. Non-Pyrogenic, DNase/Rnase free. (7500 per CS )

Sterilized by E-beam, SAL=10-6. Cell culture plates are made of high clarity, 100% virgin polystyrene. Vacuum Plasma tissue culture treatment. Clear lot number for batch traceability. Non-Pyrogenic, DNase/Rnase free. Innovative edge design for convenient sample loading. A rich selection of matching plates: 6-well, 12-well, 24-well. Low protein binding to ensure accurate results. Passed the USP VI toxicity test. Compatible with most solvents used for fixing and staining. (1 per EA)

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (4000 per CS )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam Dnase, Rnase and pyrogen free (500 per CS )

30ml Centrifuge Tube, Conical, Bulk, standard, sterile 25/pk, 500/cs (500 per CS )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (4000 per CS )