LPS is a reliable source for affordable laboratory centrifuge tubes. We offer a wide range of products including 5, 10, 15 and 50ml macro tubes as well as a wide range of microcentrifuge tubes and centrifuge bottles to meet your laboratory needs.

If you are looking for glass centrifuge tubes, please see our reusable glassware section.  Any other lab needs?  We are just a call or email away!  Contact us today.

When choosing, check the maximum relative centrifugal force (x g) the tube is rated for against your protocol and rotor; ratings differ between makers and between conical and self-standing designs. Polypropylene suits most aqueous work and resists many solvents, while polycarbonate bottles are clearer but less resistant to some chemicals. Decide between sterile tubes packed in racks or bags and lower-cost bulk non-sterile packs, and between attached and separate caps. Replacement caps for some 15 mL and 50 mL tubes are sold on their own, and a 50 mL centrifuge tube filter is available for sterile filtration.

Centrifuge Tubes: common questions

What is a centrifugation tube?

A centrifugation, or centrifuge, tube is a tube made to withstand the force of spinning in a centrifuge so that solids, cells or denser liquids separate from the rest of the sample. Most disposable tubes are polypropylene with a screw or snap cap, ranging from microtubes of 2 mL or less to conical tubes of 15 mL and 50 mL and bottles of 250 mL or more.

What is the difference between conical and self-standing centrifuge tubes?

A conical tube has a tapered bottom that collects a pellet in a small point, which makes the pellet easier to see and the liquid above it easier to remove. A self-standing, or skirted, tube has a base that lets it stand upright on the bench without a rack. Self-standing tubes are convenient for storage and handling, but check their g-force rating and fit in your rotor.

How much force can a plastic centrifuge tube take?

It depends on the tube's size, material and design, so use the maximum RCF stated by the manufacturer rather than a general figure. Exceeding the rating can crack or deform the tube and cause leaks inside the centrifuge. Also fill tubes within the recommended volume, balance the rotor, and use adapters made for that tube size.

Centrifuge Tubes

Filters
Set Descending Direction

10 Items

per page
View as List Grid
  1. Autoclavable Polycarbonate (PC) Centrifuge Bottles, 500 mL with Screw Cap, 24/CS
    Manufacturer: Foxx Life Sciences
    Autoclavable Polycarbonate (PC) Centrifuge Bottles, 500 mL with Screw Cap, 24/CS (24 per CS )
    Learn More
    was $795.54 Special Price $629.34
  2. Autoclavable Polypropylene (PP) Centrifuge Bottles, 500 mL with Screw Cap, 24/CS
    Manufacturer: Foxx Life Sciences
    Autoclavable Polypropylene (PP) Centrifuge Bottles, 500 mL with Screw Cap, 24/CS (24 per CS )
    Learn More
    was $439.84 Special Price $347.95
  3. Autoclavable Polypropylene (PP) Centrifuge Bottles, 250 mL with Screw Cap, 36/CS
    Manufacturer: Foxx Life Sciences
    Autoclavable Polypropylene (PP) Centrifuge Bottles, 250 mL with Screw Cap, 36/CS (36 per CS )
    Learn More
    was $508.36 Special Price $402.16
  4. Autoclavable Polypropylene (PP) Centrifuge Bottles, 250 mL with Seal Cap, 36/CS
    Manufacturer: Foxx Life Sciences
    Autoclavable Polypropylene (PP) Centrifuge Bottles, 250 mL with Seal Cap, 36/CS (36 per CS )
    Learn More
    was $790.47 Special Price $625.34
  5. Autoclavable Polypropylene (PP) Centrifuge Bottles, 500 mL with Seal Cap, 24/CS
    Manufacturer: Foxx Life Sciences
    Autoclavable Polypropylene (PP) Centrifuge Bottles, 500 mL with Seal Cap, 24/CS (24 per CS )
    Learn More
    was $969.01 Special Price $766.58
  6. Autoclavable Polycarbonate Centrifuge Bottles, 500 mL with Seal Cap, 24/CS
    Manufacturer: Foxx Life Sciences
    Autoclavable Polycarbonate Centrifuge Bottles, 500 mL with Seal Cap, 24/CS (24 per CS )
    Learn More
    was $1,035.29 Special Price $819.01
  7. Autoclavable Polycarbonate (PC) Centrifuge Bottles, 250 mL with Screw Cap, 36/CS
    Manufacturer: Foxx Life Sciences
    Autoclavable Polycarbonate (PC) Centrifuge Bottles, 250 mL with Screw Cap, 36/CS (36 per CS )
    Learn More
    was $1,104.94 Special Price $874.11
  8. Autoclavable Polycarbonate (PC) Centrifuge Bottles, 250 mL with Seal Cap, 36/CS
    Manufacturer: Foxx Life Sciences
    Autoclavable Polycarbonate (PC) Centrifuge Bottles, 250 mL with Seal Cap, 36/CS (36 per CS )
    Learn More
    was $1,265.49 Special Price $1,001.12
  9. EZBio® Centrifuge Tube Assemblies, 50mL, Sterile, Single Use Technology with EZBio® Tubing and Plug, 10/CS
    Manufacturer: Foxx Life Sciences
    EZBio® Centrifuge Tube Assemblies, 50mL, Sterile, Single Use Technology with EZBio® Tubing and Plug, 10/CS (10 per CS )
    Learn More
    was $742.26 Special Price $640.57
  10. EZBio® Centrifuge Tube Assemblies, 15mL, Sterile, Single Use Technology with EZBio® Tubing and Plug, 10/CS
    Manufacturer: Foxx Life Sciences
    EZBio® Centrifuge Tube Assemblies, 15mL, Sterile, Single Use Technology with EZBio® Tubing and Plug, 10/CS (10 per CS )
    Learn More
    was $720.33 Special Price $621.65
Filters
Set Descending Direction

10 Items

per page
View as List Grid