Centrifuge Tubes

Biologix 50ml clear polypropylene non-sterile conical bottom centrifuge tubes with plug-seal screw caps packaged separately. tubes have writing patch and marked graduations. 500/case (500 per CS )

Total-Pure™ Centrifuge Tubes are produced from a proprietary purified polypropylene that is certified to be free of trace metal content. Tested via ICP-MS, these tubes are certified to contain less than 1ppm of common trace metals including: Calcium, Magnesium, Zinc, Iron, Manganese, Copper, Aluminum, Silicon, Nickel, Vanadium, Sodium, Phosphorous, Cobalt, Chromium, Potassium, Lithium, Lead, Selenium, Cadmium, Mercury, and Arsenic. In addition to a superior level of purity, TotalPure™ Tubes include a wide array of premium features. These tubes are engineered to withstand a max centrifugation rate of 20,000xg, with this RCF specification printed directly on both the 15mL and 50mL tubes. These tubes also feature Hi-Viz™ graduations that are easily identified at any angle and the printed max-freeze line indicates the maximum allowable volume to be frozen inside the tubes. TotalPure's natural color caps offer a smooth seal that is easy to open/close with one hand without compromising the integrity of the 95kPA leak-proof seal. • Ultra-Pure Polypropylene Certified Free of Trace Metals • Hi-Viz™ Graduations with Maximum Freeze Capacity Line • Resealable Zip Bags of 25 Tubes, or Individually Wrapped • E-Beam Sterilized (SAL 10-6) (500 per CS )

Oxford BenchMate Microcentrifuge Tubes - 1.7mL Graduated, Sterile, Low-Retention, in Bulk Packaging. 500 Tubes/Pack, 10 Packs/Case (500 per CS )

Tube, Microtiter Cluster, 9 x 46mm (1.2mL), PP, Natural, 96/Rack, 10 Racks/Unit, CS960 (960 per PK)

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 Dnase/Rnase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (4000 per CS )

Screw-cap 1.5mL Microtube, 10 bags of 100 tubes, 1000/cs (1000 per CS )

Microcentrifuge tube w/lid, N/S, blue, 1.5mL, pack of 500 (500 per PK)

SuperClear tubes offer you a standard of performance not available from other brands of centrifuge tubes. (500 per CS )

Microcentrifuge tube w/lid, N/S, orange, 1.5mL, pack of 500 (500 per PK)

Reversible Rack with Cover for Microcentrifuge Tubes, 96-Place for 1.5mL and 2.0mL and Reverse Side is 96-Place for 0.2mL and 0.5mL Tubes, Green, 5/Pack, PK5 (5 per PK)

These polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical rea (1000 per PK)

Microtube w/ cap, 1.5mL, orange, sterile, w/ self-standing bag & Stop-Pops™, 500/pk (500 per PK )

Eliminate the need to wrap tubes with aluminum foil Large white marking area provides excellent contrast for identification Flat surface polyethylene (HDPE) caps feature integrated leak-proof seal Convenient zip-closure bag is a practical alternative to folding and taping opened bags Available in smaller case quantity of 100 tubes per case or standard 500 tubes per case (100 per CS)

Centrifuge Tube, 15mL, Attached Red Screw Cap, PS, Printed Graduations, STERILE, 50/Rack, 10 Racks/Unit, CS500 (500 per CS)

Optically clear for high visibility Seal cap features integrated silicone gasket for leak-proof seal Cap has extended lip to facilitate removal from rotor,and gripping ridges for easy opening and closing Bottles include molded graduation lines Bottle should be filled 80% of total capacity to obtain maximum results Centrifuge Bottles have a rigid body for low to moderate speed centrifugation of biological and chemical samples High quality polycarbonate and polypropylene have excellent chemical resistance Reusable and autoclavable Use of a rotor cushion is advised to support bottles during centrifugation Packaged non-sterile in re-sealable bags (4 per CS)

Reversible Rack for Microcentrifuge Tubes, 80-Place for 1.5mL and 2.0mL and Reverse Side is 60-Place for 0.2mL and 0.5mL Tubes, Red, 5/Pack, PK5 (5 per PK)

Foam Test Tube Racks for 250uL & 400uL Microcentrifuge Tubes, Charcoal, CS36 (36 per CS)

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam Dnase, Rnase and pyrogen free (500 per CS )

Centrifuge Tubes and Caps packed separately Graduations are printed in bold, easy-to-read black ink and are accurate to +/-2% Large white marking area provides excellent contrast for identification Easy to write on flat surface polyethylene (HDPE) caps feature integrated leak-proof seal Tubes include graduations molded into the conical bottom, ideal for pellet viewing and small volume quantification (500 per CS)

50ml PP (29x115mm), flat screw cap, non-sterile bulk bag, 500/cs (500 per PK )

Made from high-quality virgin polypropylene, these Micro Centrifuge Tubes are RNase, DNase and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted sur (500 per PK )

Microcentrifuge Tube w/lid, clear, 1.5mL, sterile, pack of 250 (250 per CS)

Autoclavable centrifuge tube boxes provide a more durable and rugged alternative to cardboard or foam racks. These racks can withstand a temperature of -90° C to 121° C. Color-coding makes it easy to distinguish between rack sizes - green racks hold 15ml (4 per PK )

96 Well Reversible Microtube Rack 96-well reversible polypropylene rack for 0.5mL 1.5mL and 2.0mL snap cap and screw cap microcentrifuge tubes. One side holds 0.5mL microcentrifuge tubes reverse side holds 1.5 to 2.0mL microcentrifuge tubes. Assorted colors. 5 racks per pack. (20 per CS)