Shaker Parts

Bellco Mini Roll-In Incubators have 21 cubic feet of volume and are designed for use with Bellco's Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets. (1 per EA )

For use with sticky matt tape (7740-40000). Dimensions: 12"x12", .050" thick w/ 1/2" lip with pegs. Will fit any Bellco rocker or shaker. Plain tray - no rubber matt. (1 per EA )

Flask clamps and universal platforms for shakers. Fits onto standard platforms. Purchase individual pieces to build various configurations. 25x25cm tray accepts 16 51x51cm tray accepts 49 (1 per EA )

The Bellco Roll-in Shelf cart is a mobile unit designed for transporting glass-ware & equipment from one location to another or as an easy method of loading the Bellco Roll-in Incubator. The cart is mounted on four (4) heavy duty bearing swivel castors able to support approx. 750lbs. The loaded cart can easily be rolled in the Bellco Roll-in Incubator via the castor guides located on the incubator interior floor. The cart comes with two (2) vented shelves which are adjustable & may be mounted at 6 1/8" intervals along the corner support posts. Additional shelves may be ordered under part number D504-1. The cart is capable of supporting two (2) 36 liter & two (2) 15 liter spinner flasks complete with OHD drives or a variety of smaller flasks & other assorted laboratory equipment. The cart is constructed of 1/8" aluminum & is finished with an Olivetti white textured paint. The unit is shipped un-assembled in a flat carton & is easily assembled with ordinary had tools. (not supplied). HEIGHT: 55 1/2" (141cm) WIDTH: 32 3/34" (83.2cm) (1 per EA )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

For use with sticky matt tape (7740-40000). Dimensions: 20"x20", .050" thick w/ 1/2" lip with pegs. Will fit any Bellco rocker or shaker. Plain tray - no rubber matt. (1 per EA )

For use with sticky matt tape (7740-40000). Dimensions: 10"x10", .050" thick w/ 1/2" lip with pegs. Will fit any Bellco rocker or shaker. Plain tray - no rubber matt. (1 per EA )

Roller bottle brush for 110 mm od roller bottles w/51 mm opening. Nylon bristles for easy cleaning of hard-to0-reach surfaces. Useable length: 690 MM NOTE: to keep nylon bristles straight & effective dip flattened brush in hot water - then shake out MATERIAL: •Plastic handle •Plastic tube covering shaft •#8 wire - nylon (2 per CS )

Pre-mounted stainless steel clamps for bellco Erlenmeyer flask. Flask tray fits on top of the standard tray platform. Includes clamps. Flask positions: 9 Size:1l (1 per EA )

Flask clamps and universal platforms for shakers. Fits onto standard platforms. Purchase individual pieces to build various configurations. 25x25cm tray accepts 9 51x51cm tray accepts 25 (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. 38 mm deep-skirt, nontoxic, rubber lined phenolic screw cap Replacement cap: 2029-0038a Area (cm2): 670 Replacement caps: 2029 series Dimensions: 110x285mm (2 per CS )

For use with sticky matt tape (7740-40000). Dimensions: 10"x14", .050" thick w/ 1/2" lip with pegs. Will fit any Bellco rocker or shaker. Plain tray - no rubber matt. (1 per EA )

The Bellco Benchtop Orbital Shakers are ideal for staining and washing electrophoresis gels or for any applications requiring mixing or agitation of solutions. They are engineered to operate between the limits of 30 and approximately 350 revolutions per minute, and to hold their speed at any selected setting to approximately plus or minus five percent. --Speed range: 30 - 350 rpm +/- 5% --Circular orbit: 2.5 cm (1" ) orbit --Load: 11 kg (25 lbs) maximum --Weight: 7.6 kg (17 lbs) --7744-01010, 7744-10220 & 7744-01100 units have a platform deck of 25 x 25 cm --7744-02020, 7744-20220 & 7744-02200 units have a platform deck 50 x 50 cm (1 per EA )

For low profile base unit only. Roller drum accepts 18mm tube 106 tubes per drum (1 per EA )

The Bellco Benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 50 to 1550 rpm and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory. (1 per EA )

Standard tray with pegs, *NOT* a stacking tray. Trays fit 7740 and 7743 series rocker & 7777 series 12v rocker. The "peg and grommet" design permits rapid platform changing. REPLACEMENT LINER: A502-193 SIZE: 30x30cm (1 per EA )

The Bellco Benchtop Orbital Shakers are ideal for staining and washing electrophoresis gels or for any applications requiring mixing or agitation of solutions. They are engineered to operate between the limits of 30 and approximately 350 revolutions per minute, and to hold their speed at any selected setting to approximately plus or minus five percent. --Speed range: 30 - 350 rpm +/- 5% --Circular orbit: 2.5 cm (1" ) orbit --Load: 11 kg (25 lbs) maximum --Weight: 7.6 kg (17 lbs) --7744-01010, 7744-10220 & 7744-01100 units have a platform deck of 25 x 25 cm --7744-02020, 7744-20220 & 7744-02200 units have a platform deck 50 x 50 cm (1 per EA )

Stainless steel blade holder mounted on plastic covered stainless steel handle and is fully autoclavable. 5/8 X 1/4" BLADE X 7 3/4" HANDLE. Size: small (10 per CS )

The Bellco Benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 50 to 1550 rpm and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory. (1 per EA )

Pre-mounted stainless steel clamps for bellco Erlenmeyer flask. Flask tray fits on top of the standard tray platform. Includes clamps. Flask positions: 4 Dimensions: 25x25" Size: 1l (1 per EA )

Pre-mounted stainless steel clamps for Bellco Erlenmeyer flask. Flask Tray fits on top of the standard tray platform. Includes clamps. Flask positions: 16 Dimensions: 25x25mm Size: 50ml (1 per EA )

The Bellco Benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 50 to 1550 rpm and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory. (1 per EA )

Flask clamps and universal platforms for shakers. Fits onto standard platforms. Purchase individual pieces to build various configurations. 25x25cm tray accepts 4 51x51cm tray accepts 9 (1 per EA )

For standard base unit only. Roller drum accepts 16mm tubes, 164 tubes per drum. (1 per EA )