Heating and Stirring Plates

Synchronized and Uniform Mixing (1 per EA)

Durable Digital Hotplate Stirrers with Superior Safety Features and Intelligent Performance. Protect your lab with SmartPresence™ and SmartLink™ technologies. These exclusive features automatically shut off the heater if no one is detected after a user-defined "time out" period has elapsed. SafetyHeat™ protects the lab – an industry-leading early detection system uses two independent safety controls to monitor the electronics and stop heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 rpm is made possible by the design of a powerful motor, strong magnet and software controlled ramp rate, ensuring secure magnetic coupling for viscous applications. (1 per EA)

Digital Hotplate Magnetic Stirrer, 230V EA /1 (1 per EA)

Magnetic Induction Stirrer, 100-240 VAC, 50/60 Hz, Grey / Purple (1 per EA )

SCILOGEX MS-M-S10 10-Position Analog Magnetic Stirrer MS-M-S10 10-place multiposition stirrer features a powerful rotary drive providing consistent sample conditions across each position for volumes up to 400 mL. The stirrer surface is stainless steel w (1 per EA)

The United Scientific™ Eco-Stir Magnetic Stirrer is designed for use with low viscosity liquid or solid/liquid mixtures. Compact design with a small footprint while capable of stirring volumes up to 2L. Four non-slip feet provide stability. Includes power adapter, magnetic stirbar, and user manual. Technical Specifications: • Motor type: Brushless • Speed Control: Continuous variable rotary knob • Speed Range: 350 - 1800 rpm • Working platform diameter: 13.5 cm • Maximum Stirring Volume: 2 liters • Stir Bar Accommodation: 20mm to 30mm • Product Dimensions: 16.8 x 16 x 4.7 cm • Input Power: 5W • Operates on 115V / 60 Hz (1 per EA )

Hotplate EH45APlus (1 per EA)

T-18QG Hotplate (Digital, 180mm, handle), US plug, 120V, 60Hz (1 per EA )

The Bellco Digital CTII Hi-Torque Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. Hi-Torque Overhead Drive with interface for use with CellTrol II controller. Having speed capability user can monitor (but not control) rpm of OHD from the controller display and set alarm for rpm setpoints. Includes speed cable and power supply. (1 per EA )

10-position hotplate stirrer, digital with white ceramic top plate. 120V (1 per EA)

High performance multi-position hotplate stirrer with 5 stirring positions for optimal efficiency of time and the use of laboratory space. Variable speed ranging from 300 rpm – 1500 rpm in steps of 10 rpm. Timer setting from 1-999 mins and infinite mode. Closed design allows for easy cleaning and protects the equipment from accidental spills. Non-slip and sturdy rubber feet. (1 per EA )

SCILOGEX MS-PB Analog Circular Stirrer, 110-220V, 50/60Hz, US Plug (1 per EA)

TM-18QG Hotplate & Magnetic Stirrer (Basic, 180mm), US plug, 120V, 60Hz (1 per EA )

Hotplate Magnetic Stirrer, 7.5in. x7.5in. , 230V, EA /1 (1 per EA)

The BEING Magnetic Heated Stirrers offer a large variety of sizes and temperature ranges to accommodate your laboratory needs. Our stirrers provide a user friendly PID controller offering a large LCD color screen for easy viewing. They are constructed for durability, high performance and safety. (1 per EA )

Hotplate EG37B (1 per EA)

The Bellco btbTM12 Volt Orbital Shaker is a compact unit designed for continuous duty shaking using intrinsically safe low voltage electronics. The one-inch orbital motion provides even mixing. The rubber suction cup feet keep the unit firmly attached to surface. Counterbalanced drive shafts for precise orbital motion. Includes 25x25cm (10x10" ) tray. Dims: 11x11x5" (28x28x14cm) (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Hotplate, 7.5in. x7.5in. , 115V, EA /1 (1 per EA)

The Bellco Benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 50 to 1550 rpm and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory. (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

MS-H380-Pro 5.5 x 5.5 in. LCD Digital Magnetic Hotplate Stirrer: The new MS-H380 hotplate-stirrer is a very economically priced LCD digital hotplate-stirrer ideal for temperatures below 380°C. This compact unit can be used as a hotplate, stirrer or co (1 per EA )

MiniMag Magnetic Stirrer, 240V , EA /1
The price shown is the minimum price allowed by the manufacturer. We highly recommend you contact info@labproservices.com for a quotation. (1 per EA)

MiniMag Magnetic Stirrer, 100V, EA /1
The price shown is the minimum price allowed by the manufacturer. We highly recommend you contact info@labproservices.com for a quotation. (1 per EA)