Heating and Stirring Plates

Hotplate EH35B (1 per EA)

Magnetic Induction Stirrer, 100-240 VAC, 50/60 Hz, Grey / Blue (1 per EA )

Digital Hotplate Magnetic Stirrer, 115V EA /1 (1 per EA)

MG600H: 6 Point Controllable Type (individual stirring heating) magnetic stirrer with hot plate (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Durable Digital Hotplate Stirrers with Superior Safety Features and Intelligent Performance. Protect your lab with SmartPresence™ and SmartLink™ technologies. These exclusive features automatically shut off the heater if no one is detected after a user-defined "time out" period has elapsed. SafetyHeat™ protects the lab – an industry-leading early detection system uses two independent safety controls to monitor the electronics and stop heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 rpm is made possible by the design of a powerful motor, strong magnet and software controlled ramp rate, ensuring secure magnetic coupling for viscous applications. (1 per EA)

Expertly Engineered Hotplate Stirrers with Premium Safety and Versatility Features for Everyday Use (1 per EA)

The Bellco High Torque Digital Overhead Drive is a versatile directdrive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The High Torque model is ideal for the agitation of medium to viscous liquids. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Units are powered by a 24VDC power supply (included) and are CE compliant. Speed range: 5 - 150 rpm +/- 2% Electrical: 230v/24v fused at 2 AMP Brushless motor for low maintenance Reverse direction switch Easy mounting bracket with ‘peg & grommet’ design Hi-torque models: 31 in-lb torque, 50w Dimensions: 9.5" x 6" x 7.5" (24 x 15 x 19cm) includes handle, 230v (1 per EA )

Biologix flatspin magnetic stirrer. magnetic stirrer features a speed range of 15-1500 rpm. unit operates on 100v-240v/50hz/60hz. price/each (1 per EA )

High performance multi-position stirrer with 10 stirring positions for optimal efficiency of time and the use of laboratory space. Variable speed ranging from 300 rpm – 1500 rpm in steps of 10 rpm. Timer setting from 1-999 mins and infinite mode. Closed design allows for easy cleaning and protects the equipment from accidental spills. Non-slip and sturdy rubber feet. (1 per EA )

SCILOGEX MS-H-Pro Plus Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, 110V/60Hz, US Plug (1 per EA)

SCILOGEX MS-H-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, 110V, 50/60Hz, US Plug (1 per EA)

Hotplate Stirrer, Digital, 550C Maximum Temperature, 7 x 7 inch glass ceramic top plate, 200-240v 50-60Hz (1 per EA)

Magnetic Stirrer - Mini (1 per EA )

SCILOGEX MS7-HP550-S LED Digital 7’’ Square Magnetic Hotplate, ceramic-glass plate, 110V, 50//60Hz, US Plug (1 per EA)

Hotplate Stirrer, Digital, 380C Maximum Temperature, 5.5 x 5.5 (1 per EA)

High capacity magnetic stirrer, 150L with ceramic top plate, 120V (1 per EA)

The Bellco Digital Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Units are powered by a 24VDC power supply (included) and are CE compliant. Speed Range: 5 – 150 Rpm +/- 2% Electrical: 115V/24V Fused At 1 Amp Brushless Motor For Low Maintenance Reverse Direction Switch Easy Mounting Bracket With ‘Peg & Grommet’ Design Dimensions: 4.5" X 5.5" X 8" (11 X 14 X 20cm) Includes Handle Standard Models: 19 In-Lb Torque, 30w Environmental Conditions, (Operating):indoor use, pollution degree 2, 4° to 50° C relative humidity 0-90% non-condensing. Environmental Conditions, (Non-operating): -10° to 60° C, relative humidity 95% maximum. (1 per EA )

Hotplate Magnetic Stirrer, 7.5in. x7.5in. , 115V, EA /1 (1 per EA)

Stirrer, Analog, 7 x 7 inch glass ceramic top plate, 200-240v 50-60Hz (1 per EA)

MS-H280-Pro Circular-top Digital Magnetic Hotplate Stirrer: The new MS-H280 hotplate-stirrer is a very economically priced LED digital hotplate-stirrer ideal for temperatures below 280°C. This compact unit can be used as a hotplate, stirrer or combina (1 per EA )

Rugged and Reliable Analog Hotplates and Stirrers for General Purpose Heating and Stirring (1 per EA)

Strong magnetic stirrer with hot plate for chemical synthesis experiments (1 per EA )

The Benchmark Multi-Position Stirring Hotplates provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white-ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch. Three models are available, offering 3, 5 or 10 position capacity. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles. (1 per EA)