Lab Equipment

At Laboratory Procurement Services (LPS) we are committed to offering a wide range of affordable laboratory equipment, from microscopes and centrifuges to electrophoresis systems, ultralow freezers and balances to researchers, educators, and healthcare professionals. Our mission is to ensure that the cost of equipment does not hinder progress in scientific research and innovation.

 LPS streamlines the procurement process, to allow our customers to spend more time performing the critical processes needed to help their company succeed.  Contact us today for assistance in selecting the best equipment for your requirements.

Before ordering equipment, check the electrical requirements: products are listed for specific voltages and frequencies, such as 120V/60Hz or 208-240V, and some need a dedicated circuit. Measure the space you have, including clearance for ventilation and door swing on refrigerators and freezers. Check what the unit needs to run, such as a water feed and replacement cartridges for water purification systems, electrodes and buffers for meters, or rotors and adapters for centrifuges, and confirm that parts and consumables are available for the model. If you work under a quality system, look for data logging, temperature monitoring or GLP features.

Equipment: common questions

What equipment does a biopharmaceutical lab need?

Most biopharmaceutical and life science labs rely on balances, pipettes and dispensers, centrifuges, mixers and shakers, incubators and water baths, laboratory refrigerators and ultralow freezers, pH and conductivity meters, and water purification systems. Cell culture work also needs biological safety cabinets and CO2 incubators. The exact list depends on the processes, sample types and regulatory requirements of the lab.

What is the difference between rpm and g-force on a centrifuge?

Rpm is how many times the rotor turns per minute. G-force, or relative centrifugal force (RCF), is the force actually applied to the sample, and it depends on both speed and rotor radius. Because rotors differ in radius, the same rpm can give different g-forces on different centrifuges, so many protocols specify x g. Most centrifuges can display or convert between the two.

What should I check on electrical equipment before ordering?

Confirm the voltage, frequency and plug type match your outlet; a 208-240V unit will not run on a standard 120V outlet. Check the current draw, since large freezers, chillers and ovens may need a dedicated circuit. Also allow the clearance around the unit that the manufacturer specifies for air flow and service.

How long does lab equipment take to arrive?

Many items ship directly from the manufacturer, so lead times vary by item. Orders can be placed online, and approved business accounts can pay by purchase order. For lead times or pricing on several items, contact LPS through the Contact Us page.

Equipment

Filters
Set Descending Direction

8554 items

Page
per page
View as List Grid
  1. Phosphate & ResinTech® AGC 50/40 CSAW Taste, Odor and Chlorine Removal with Scale and Corrosion Inhibitor, 4.5in x 20in, Blue, 4.0 lbs. Phosphate, CS4
    Manufacturer: Aries Filterworks
    Aries Carbon & Phosphate cartridges are designed to improve drinking water aesthetics while simultaneously mitigating scale buildup. Premium granular activated carbon works to dramatically improve the taste and odor of drinking water by reducing chlorine, while Phosphate works to soften water, control scale and corrosion, and sequester iron, calcium and manganese. Sized to fit standard slimline and big blue housings. (4 per CS )
    Learn More
    was $764.84 Special Price $696.01
  2. 1-5mL Pipette, Adjustable Volume, Single Channel
    Manufacturer: CELLTREAT Scientific Products
    1-5mL Pipette, Adjustable Volume, Single Channel (1 per EA )
    Learn More
    was $253.00 Special Price $152.40
  3. Electronic Balance, AX8201N/E
    Manufacturer: Ohaus Corporation
    Electronic Balance, AX8201N/E (1 per EA)
    Learn More
    was $2,365.95 Special Price $2,111.66
  4. Blot Box, 11.7 X 8.9 Cm, 6 -10ml Capacity For Lrg PK10
    Manufacturer: Labnet International Inc
    Labnet's ENDURO™ Gel XL includes all components necessary to cast and run horizontal gels: gel trays, combs, casting stand, gel tank and digital power supply. The migration tank, gel trays and multichannel combs are molded for leak-proof performance and a long service life. The direct connection of the power supply into the gel box eliminates the need for power leads. (10 per PK )
    Learn More
    $88.63
  5. Pipette, DiamondAPEX, Fully Autoclavable, Adjustable Volume, 0.1 - 2.5uL, Red (Tip Group A)
    Manufacturer: Globe Scientific
    Pipette, DiamondAPEX, Fully Autoclavable, Adjustable Volume, 0.1 - 2.5uL, Red (Tip Group A) (1 per EA)
    Learn More
    was $278.90 Special Price $203.36
  6. HN Cartridge Wall Mount Holding Bracket EA1
    Manufacturer: LabStrong Corporation
    The LabStrong D8900LS Hose Nipple Cartridge Wall Mount Holding Bracket is comparable to D8900 Hose Nipple Cartridge Holder. The LabStrong D8900LS Hose Nipple Cartridge Wall Mount Holding Bracket can be used with all LabStr (1 per EA)
    Learn More
    $37.00
  7. MyTemp™ Mini Digital Incubator, with heating only 115V
    Manufacturer: Benchmark Scientific
    MyTemp Mini Digital Incubator, with heating only 115V, EA /1 (1 per EA)
    Learn More
    was $648.56 Special Price $578.84
  8. Large Vessel Holder For 500 ml/1 L Flask
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $80.95 Special Price $65.43
  9. MC-24™ Touch High Speed Microcentrifuge with COMBI-Rotor, 115v
    Manufacturer: Benchmark Scientific
    MC-24 High Speed Microcentrifuge with COMBI-Rotor, 115v EA/1 (1 per EA)
    Learn More
    was $2,693.23 Special Price $2,403.71
  10. MicroPette 8-Channel Pipettor, 5-50μl
    Manufacturer: Scilogex
    MicroPette 8-Channel Pipettor, 5-50µl (1 per EA)
    Learn More
    was $528.00 Special Price $415.80
  11. AD-4212A/B/C Series Production Weighing System 110g X 0.01mg w/ RS-232C w/ 304 SS Weighing Sensor
    Manufacturer: A and D Weighing
    High performance/high precision weighing modules Patented C-SHS weighing & EM-DLC analog to digital converter ensure precise results every time High speed & high resolution for in-line production weighing, filling, checkweighing, or enclosed environments Compact durable design to protect against vertical & transverse overloads, vibration & draft (1 per EA)
    Learn More
    was $10,845.00 Special Price $10,248.53
  12. Pipette Leak Tester
    Manufacturer: A and D Weighing
    Avoid costly blowout and instantly I.D. seal integrity Quick and easy test performed in less than 5 seconds Instantly determines whether a pipettes or small pumps, container & piping need repair/maintenance Leak detection is performed with depressurization/air filter system to ensure no-dust interferences, increasing test accuracy (1 per EA)
    Learn More
    was $2,580.00 Special Price $1,979.65
  13. Block For 9 X 5mL Eppendorf Tubes
    Manufacturer: Ohaus Corporation
    Largest Variety of Options to Accommodate Any Shaking Application (1 per EA)
    Learn More
    was $1,286.95 Special Price $1,039.50
  14. Tube Holder Disk, GTR-ID Series Rotators 16-Place Disk, for 15mL Centrifuge Tubes
    Manufacturer: Globe Scientific
    The GTR-ID Tube Rotator efficiently mixes your biological samples and solutions using the included 50mL tube holder disk or the optional 1.5 / 2.0mL and 15mL disks. An industrial style metal housing with tilt adjustment ensures a lifetime of worry-free op (1 per EA)
    Learn More
    was $127.40 Special Price $111.48
  15. Hotplate-Stirrer e-G51HSRDM 120V US
    Manufacturer: Ohaus Corporation
    Reliable Digital Hotplate Stirrers with Exceptional Safety Features for Everyday Use. SafetyHeat™ protects the lab - an industry-leading early detection system uses two independent safety controls to monitor the electronics and stop heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 rpm is made possible by the design of a powerful motor, strong magnet and software controlled ramp rate, ensuring secure magnetic coupling for viscous applications. The bright LCD display includes large temperature and speed settings, intuitive icons and a prominent hot top indicator – all designed to quickly and easily monitor performance from across the lab. (1 per EA)
    Learn More
    was $768.95 Special Price $672.87
  16. Msmidi 96 Comb 8 Sample Mc EA1
    Manufacturer: Labnet International Inc
    Labnet's ENDURO™ Gel XL includes all components necessary to cast and run horizontal gels: gel trays, combs, casting stand, gel tank and digital power supply. The migration tank, gel trays and multichannel combs are molded for leak-proof performance and a long service life. The direct connection of the power supply into the gel box eliminates the need for power leads. (1 per EA)
    Learn More
    $368.74
  17. Open Tank, 14L, Polycarbonate
    Manufacturer: Polyscience Corp
    14L Polycarbonate Open Tank EA /1 (1 per EA)
    Learn More
    $572.00
  18. Open Tank, 23L, Polycarbonate
    Manufacturer: Polyscience Corp
    23L Polycarbonate Open Tank EA /1 (1 per EA)
    Learn More
    $751.00
  19. Adapter, D17mm, 15ml RB Tubes x2
    Manufacturer: Ohaus Corporation
    Compatible with Rotor Angle 6x50ml RB/FA and Rotor Angle 6x50ml RB/FA ID. (1 per EA)
    Learn More
    was $254.95 Special Price $171.63
  20. Meter, Conductivity/pH/TDS/Temperature, Myron L TechPro II™ TPH1
    Manufacturer: Taylor Technologies
    Meter, Conductivity/pH/TDS/Temperature, Myron L TechPro II™ TPH1 (1 per EA)
    Learn More
    $1,100.66
  21. Platform, holds 6 standard micro plates (max. 1)
    Manufacturer: Benchmark Scientific
    Platform, holds 6 standard micro plates , max. 1 , EA /1 (1 per EA)
    Learn More
    was $997.47 Special Price $890.24
  22. Compact Centrifuge with Combination Rotor, 120V
    Manufacturer: Benchmark Scientific
    The Z207-A-CMB includes a convenient combination rotor that holds 4 x 15 ml and 4 x 50 ml tubes in the same rotor. With the combination rotor there's no longer a need switch rotors, or use adapters to centrifuge 15 ml and 50 ml tubes for tissue culture. Y (1 per EA )
    Learn More
    was $2,416.08 Special Price $2,211.20
  23. Benchmark SureAir PCR Workstation, 230V (ships only by freight)
    Manufacturer: Benchmark Scientific
    The Benchmark SureAir™ PCR workstation is a compact, convenient way to reduce contamination concerns and provide a clean room environment at a fraction of the space and cost. The high-powered yet quiet internal fan produces laminar flow conditions without any installation into ductwork. The included HEPA filter purifies air within the chamber, meeting ISO 5 cleanliness standards, and filters 99.97% of particles 0.3 µm and larger. The double-hinged front panel provides ample workspace for convenient hand access, and can be opened fully to allow placement of equipment inside. The SureAir is designed to keep your workspace clean, easy-to-use, and organized. An included germicidal UVC light eliminates any stray DNA that may cotaminate samples, and is programmed to automatically shut off after 15 minutes. To protect users, the UVC light is only operational when the cover is closed, and will shut off upon opening the cover. Ample lighting is provided by an energy efficient LED light source. Up to 3 standard size pipettes are accommodated by the pipette holder integrated within the storage shelf. Pipette tips and small instruments can also be stored away from the main workspace when not in use. Power cables can easily be routed through the access port on the right side of the chamber. (1 per EA)
    Learn More
    was $2,478.76 Special Price $2,212.30
  24. United Scientific™ Variable Volume Fully Autoclavable Micropipette, 0.5-5 ml
    Manufacturer: United Scientific Supplies
    Our Variable Volume Micropipettes feature built-in tip ejectors and autoclavable tip cones. They work on a click stop digital system, are easy to calibrate and maintain, and easy to disassemble for autoclaving. Manufactured in an ISO 9001:2008 certified f (1 per EA)
    Learn More
    was $142.00 Special Price $120.03
Filters
Set Descending Direction

8554 items

Page
per page
View as List Grid