Equipment

MICROSCOPE FLUORESCENCE ADAPTER,Flexible gooseneck lamp base with control circuit/1 unit with Royal Blue light ( 120-240VAC, 50/60Hz), a set of DK-3000 microscope adapters(Including: f67mm microscope adapter ring/1 unit, square filter shield /1unit, round filter/1 unit, Excitation Wave Length: 440-460nm, Emission Filter: 500nm LP, fit for GFP, FITC, packed in an aluminum alloy suitcase, 1/Case (1 per EA )

The LabStrong D5026LS cartridge kit is comparable to D5026 cartridge kit. Side-by-side testing shows fantastic results for purity and longevity. The D5026LS cartridge kit is used with NANOpu (1 per EA)

NextPette variable volume pipette 20 to 200ul, EA /1 (1 per EA)

Digital Hotplate, 10 x 10 inch, 115V (1 per EA )

SIEVA-3 Filtration Centrifuge, 120V EA /1 (1 per EA )

High performance/high precision weighing modules Patented C-SHS weighing & EM-DLC analog to digital converter ensure precise results every time High speed & high resolution for in-line production weighing, filling, checkweighing, or enclosed environments Compact durable design to protect against vertical & transverse overloads, vibration & draft (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 121°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP and includes a perforated PP desiccator plate. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock accepts 1/4" I.D. tubing and has a self-lubricating PTFE plug. Use the three-way plug to create a vacuum, release a vacuum, or for shut-off. (1 per EA)

Accessory That Fits Thru A Headplate And Holds The Rtd Sensor Which Monitors The Temperature In A Bioreactor. These Thermowells Are Designed Specifically For The Bellco Control Systems And Fit Through A 5/16" Fitting On The Stainless Steel Headplate. (1 per EA )

United Scientific® Pinpoint™ Silicone Adapter (1 per EA )

Magnetic Stirrer, 7.5in. x7.5in. , 230V, EA /1 (1 per EA)

GL28 Adapter, 28mm (1 per EA)

Labnet Enduro GDS II with 365nm UV EA 1 (1 per EA )

Electronic Balance, PX4202/E (1 per EA)

The Bellco Sci-ERA Hot Shaker is a slow speed, large orbit shaker for incubation of electrophoretic gels and filter hybridization media. Stringent temperature control with a sensitivity of +/-0.1°C is useful for many biochemical assays. This Bellco design incorporates a seamless stainless steel lined temperature controlled water bath mounted on a low-profile one inch orbiting platform. The unique chamber design offers simple containment of potential spills. The chamber is completely isolated from electromechanical components. The Sci-ERA Hot Shaker has audible over-temperature alarms and built-in safety features to prevent heater burn-out. An easy-to-use microprocessor controller offers stringent temperature control. (1 per EA )

High performance/high precision weighing modules Patented C-SHS weighing & EM-DLC analog to digital converter ensure precise results every time High speed & high resolution for in-line production weighing, filling, checkweighing, or enclosed environments Compact durable design to protect against vertical & transverse overloads, vibration & draft (1 per EA)

Electronic Balance, AX523/E (1 per EA)

SP-V1100 Spectrophotometer 325~1000nm: Scilogex Spectrophotometers are indispensable instruments routinely used in colleges, universities and research institutes for quantitative analysis in fields including biotechnology and quality control of new mater (1 per EA )

Replacement Flat pH./ORP Probe (1 per EA )

Block, 2 x 50ml centrifuge tubes, EA /1 (1 per EA)

Multifunctional Bench Scale for Standard Industrial Applications. User-friendly model with an easy-to-use keypad, large backlit display and plain text on-screen prompts which guide you through operation. Durable construction with a stainless steel platform, sand gray powder-coated steel frame & aluminum load cell. Defender meets NTEP/Measurement Canada or OIML/EC type approvals (depending on region). Features common industrial modes and supports a 50,000-item library with 1,000 user profiles for easy data management. Includes GMP/GLP with time/date for result traceability. (1 per EA)

Non-vacuum desiccator manufactured from clear borosilicate glass, including borosilicate glass lid with a molded-in knob. Also includes a perforated porcelain desiccator plate that fits onto a ridge above the lower chamber. A standard drying agent, such as silica or anhydrous calcium chloride, can be positioned in the lower chamber. Autoclavable. Flange outer diameter: 300mm Flange inner diameter: 234mm Top chamber diameter: 300mm Top chamber height: 125mm Maximum clearance above plate: 205mm Note: The rims of the desiccator and lid are ground glass and require greasing before use to create an air-tight seal. (1 per EA)

Fuse, 0.25A 250V, for 1300's, Older 1400's (1 per EA )

Robust Memosens 2.0 pH sensor for laboratory measurement and random sampling in the field (1 per EA )

Labnet's ENDURO™ Gel XL includes all components necessary to cast and run horizontal gels: gel trays, combs, casting stand, gel tank and digital power supply. The migration tank, gel trays and multichannel combs are molded for leak-proof performance and a long service life. The direct connection of the power supply into the gel box eliminates the need for power leads. (1 per EA)