Lab Equipment

At Laboratory Procurement Services (LPS) we are committed to offering a wide range of affordable laboratory equipment, from microscopes and centrifuges to electrophoresis systems, ultralow freezers and balances to researchers, educators, and healthcare professionals. Our mission is to ensure that the cost of equipment does not hinder progress in scientific research and innovation.

 LPS streamlines the procurement process, to allow our customers to spend more time performing the critical processes needed to help their company succeed.  Contact us today for assistance in selecting the best equipment for your requirements.

Before ordering equipment, check the electrical requirements: products are listed for specific voltages and frequencies, such as 120V/60Hz or 208-240V, and some need a dedicated circuit. Measure the space you have, including clearance for ventilation and door swing on refrigerators and freezers. Check what the unit needs to run, such as a water feed and replacement cartridges for water purification systems, electrodes and buffers for meters, or rotors and adapters for centrifuges, and confirm that parts and consumables are available for the model. If you work under a quality system, look for data logging, temperature monitoring or GLP features.

Equipment: common questions

What equipment does a biopharmaceutical lab need?

Most biopharmaceutical and life science labs rely on balances, pipettes and dispensers, centrifuges, mixers and shakers, incubators and water baths, laboratory refrigerators and ultralow freezers, pH and conductivity meters, and water purification systems. Cell culture work also needs biological safety cabinets and CO2 incubators. The exact list depends on the processes, sample types and regulatory requirements of the lab.

What is the difference between rpm and g-force on a centrifuge?

Rpm is how many times the rotor turns per minute. G-force, or relative centrifugal force (RCF), is the force actually applied to the sample, and it depends on both speed and rotor radius. Because rotors differ in radius, the same rpm can give different g-forces on different centrifuges, so many protocols specify x g. Most centrifuges can display or convert between the two.

What should I check on electrical equipment before ordering?

Confirm the voltage, frequency and plug type match your outlet; a 208-240V unit will not run on a standard 120V outlet. Check the current draw, since large freezers, chillers and ovens may need a dedicated circuit. Also allow the clearance around the unit that the manufacturer specifies for air flow and service.

How long does lab equipment take to arrive?

Many items ship directly from the manufacturer, so lead times vary by item. Orders can be placed online, and approved business accounts can pay by purchase order. For lead times or pricing on several items, contact LPS through the Contact Us page.

Equipment

Filters
Set Descending Direction

8554 items

Page
per page
View as List Grid
  1. 6 x 5ml swing out rotor (for Z206-A only)
    Manufacturer: Benchmark Scientific
    6 x 5ml swing out rotor , for Z206-A only , EA /1 (1 per EA)
    Learn More
    was $873.89 Special Price $799.78
  2. Rotor for use with GCM-24 Series 15000rpm max, 4 x 8 positions for 0.2mL PCR Tubes
    Manufacturer: Globe Scientific
    Globe's GCM Series was designed with your lab in mind... whether you spin-down microcentrifuge tubes, PCR tubes or PCR Strips, the GCM will provide you with reliable performance use after use. Operating the GCM is quick and easy; close the lid to accelera (1 per EA)
    Learn More
    was $1,040.00 Special Price $910.00
  3. MyBath™ 8L Digital Water Bath, 115V
    Manufacturer: Benchmark Scientific
    MyBath 8L Digital Water Bath, 115V, EA /1 (1 per EA)
    Learn More
    was $1,297.68 Special Price $1,158.18
  4. ResinTech Activated Carbon Acid Wash Coconut Shell, Tank Size 6x18in., 0.25cf, NPT 3/4in.
    Manufacturer: Aries Filterworks
    Pre-loaded, media filled tanks provide additional capacity and higher flow rates compared to cartridge based systems. Tanks include head, riser, and screen and are filled with premium ResinTech resins or carbon. (1 per EA )
    Learn More
    was $310.33 Special Price $275.34
  5. Fix Volume Micropipette, 100 vol
    Manufacturer: Eisco Scientific LLC
    Fix Volume Micropipette, 100 vol (1 per EA )
    Learn More
    was $119.55 Special Price $97.24
  6. TubeRoller with 10 rollers, 230V
    Manufacturer: Benchmark Scientific
    TubeRoller with 10 rollers, 230V, EA /1 (1 per EA)
    Learn More
    was $1,672.74 Special Price $1,492.92
  7. LABORATORY REFRIGERATORS 2ºC to 8ºC, 49 cu.ft., double glass door, Cycle Defrost, 115v, Datalogging
    Manufacturer: SoLo Environmental
    LABORATORY REFRIGERATORS 2ºC to 8ºC, 49 cu.ft., double glass door, Cycle Defrost, 115v, Datalogging (1 per EA )
    Learn More
    $6,800.00
  8. Pipette, Diamond PosiStop, Fully Autoclavable, 12-Channel, Adjustable volume, 0.5 - 10ul, Red
    Manufacturer: Globe Scientific
    Globe Scientific Diamond PosiStop Multi-Channel Pipettors The Diamond™ PosiStop™ 8-channel and 12-channel pipettors incorporate all the outstanding features of the single-channel variants and more. Building on the success of the Diamond™ APEX™ series, Globe Scientific is excited to offer the Diamond™ PosiStop™ range of LTS-compatible pipettors. The Diamond™ PosiStop™ line embodies the pinnacle of pipettor technology, combining unparalleled precision with exceptional user comfort. Precision and consistency: The magnetically assisted piston design ensures pinpoint accuracy and consistent repeatability in all pipetting actions, from the first to the second stop. This precision is further enhanced by our innovative spring and seal design, which results in one of the lowest plunger forces in the industry. Additionally, the unique silicone shock absorber in the tip ejection mechanism significantly reduces user fatigue, making lab work more comfortable. Built to cast: Durability is a key feature of the Diamond™ PosiStop™ pipettors, thanks to the robust PVDF material used for the tip cone and ejector. This resilience is matched with the confidence of being calibrated in an ISO17025 compliant facility. Plus, each pipettor comes with a 3-year warranty for complete peace of mind. Ergonomic excellence: Like the Diamond™ APEX™, the new LTS-compatible Diamond™ PosiStop™ pipettors excel in ergonomic design and ease of use. Experience the next chapter in the renowned legacy of Globe Scientific’s Diamond™ series of pipettors. Enhanced flexibility and precision: The Diamond™ PosiStop™ multi-channel pipettors boast a 360° rotating manifold, facilitating both vertical and horizontal positioning during aspirating or dispensing. This feature significantly improves ease of use and adaptability in various lab scenarios. Each channel is individually calibrated, ensuring uniformity and precision across all channels. Key features for optimal performance: • Fully autoclavable and UV resistant: Ensuring durability and adaptability in various laboratory environments • 3-Year warranty: Providing extended assurance of quality and performance • Color-coded plunger inserts: For quick and easy volume identification, streamlining your laboratory processes • Low plunger force: Offering a virtually fatigue-free pipetting experience • Magnetically assisted piston: Guarantees extremely high accuracy and consistency • Ergonomically designed and lightweight: Enhances comfort during prolonged use • Precise volume adjustment: Allows for exact measurements and control • Secure locking mechanism: Prevents accidental volume changes, ensuring reliable results • Available in adjustable and fixed volume models: Catering to diverse laboratory needs with specific requirements • Individually calibrated channels: Ensures consistent accuracy across all channels. • Removable manifold: Facilitates easy volume identification, optimizing workflow efficiency. • Available in 8-channel and 12-channel, adjustable volume models: Catering to diverse laboratory needs with specific requirements. (1 per EA)
    Learn More
    was $682.10 Special Price $497.36
  9. EK-I Series Compact Balances 6000g x 1g NTEP Class III D= 1g
    Manufacturer: A and D Weighing
    Versatile Weighing Ranges and Robust Design Compact rugged design and reliable SG Weighing Technology Versatile single & triple weighing ranges to fit your counting, percent & comparator applications NTEP approved Intrinsically Safe versions (1 per EA)
    Learn More
    was $745.00 Special Price $571.64
  10. FZ-i Series Precision Balance (Internal Calibration) 122 g x 0.001 g w/ Breeze Break (3.4in. high)
    Manufacturer: A and D Weighing
    A precision balance that combines all of the essential weighing functions in a compact, light-weight package. C-SHS Patented weighing technology Compact footprint with fast stabilization Dependable & durable IP65 and Legal for Trade (NTEP and MC) models available (1 per EA)
    Learn More
    was $1,606.80 Special Price $1,181.00
  11. Combs Sub20-C1.5-40Mc Assy
    Manufacturer: Hoefer Inc
    Combs Sub20-C1.5-40Mc Assy (1 per EA)
    Learn More
    was $90.00 Special Price $64.72
  12. 1 micron Chloramine, Taste & Odor Removal, 4.5in x 20in, CS4
    Manufacturer: Aries Filterworks
    Carbon filtration is an inexpensive and effective way to remove chemicals and contaminants commonly found in tap water. Aries Chloramine Reduction Carbon Block cartridges are an ideal choice for taste and odor control, chlorine/chloramine reduction, and organic, lead, and scale prevention. Each block is wrapped with a polypropylene outer layer and netting to prevent premature clogging of the carbon block. (4 per CS )
    Learn More
    was $683.56 Special Price $622.04
  13. Rotor Angle 24x1.5/2.0ml BIOSEALS V2
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $1,333.95 Special Price $897.89
  14. Support Rod And Clamp Kit
    Manufacturer: Ohaus Corporation
    Largest Variety of Options to Accommodate Any Shaking Application (1 per EA)
    Learn More
    was $239.95 Special Price $210.00
  15. Floor Scale i-DFD25P500E1S
    Manufacturer: Ohaus Corporation
    Convenient Portability with Floor Scale Capacity (1 per EA)
    Learn More
    was $1,413.95 Special Price $1,039.29
  16. Calibration plate for MR9600 SmartReader 96
    Manufacturer: Benchmark Scientific
    Calibration plate for MR9600 SmartReader 96 (1 per EA)
    Learn More
    was $2,802.80 Special Price $2,769.83
  17. UNDERCOUNTER & COUNTERTOP REFRIGERATOR 2°C to 8°C, 2.5 cu.ft., Cycle Defrost, 115V
    Manufacturer: Yamato Scientific America
    UNDERCOUNTER & COUNTERTOP REFRIGERATOR 2°C to 8°C, 2.5 cu.ft., Cycle Defrost, 115V (1 per EA )
    Learn More
    was $2,285.00 Special Price $2,039.36
  18. 4.2 Cu. Ft, ADA Solid Door Freezer (Built-In) - NSF Compliant
    Manufacturer: American BioTech Supply
    Exterior Door: One solid swing door, self closing, right hinged, Shelves: Two fixed shelves, Defrost: Manual Defrost, Probe Access: Rear wall port (3/4") dia., Controller type: Two years parts and labor warranty, excluding display probe calibration + a 5 year compressor warranty , Temperature Setpoint Range: -15°C to -28°C (Controller settings must remain unaltered to ensure thermal performance compliant with NSF/ANSI 456 requirements), Temperature Alarms: Audible and visual high and low temperature alarms, Compressor: Two years parts and labor warranty, excluding display probe calibration + a 5 year compressor warranty , Keyed Door Lock: Yes, Casters or Leveling Legs: Leveling Legs , Agency Listing & Certification: Compliant with the thermal performance requirements as defined in the NSF/ANSI 456 Standard for Vaccine Storage for all testing protocols. UL, C-UL, ETL, C-ETL listed (either single or dual agency listings) and certified to UL471 standard, hydrocarbon refrigerant safety., Warranty: Two years parts and labor warranty, excluding display probe calibration + a 5 year compressor warranty , Refrigerant: EPA SNAP compliant, R600a, Isobutane, Voltage: 115V, Amps: 1.5, Included Accessories: Temperature monitor device (TMD) complies with the current CDC guidelines, with 3 years certification of calibration, “buffered” probe in the product simulated solution, min/max memory. °F/°C switchable, field installable, and visual & audible temp alarm; Pharmacy refrigerator/freezer toolkit and temperature logs (1 per EA )
    Learn More
    was $2,342.00 Special Price $1,576.34
  19. SCILOGEX 15ml x 12 centrifuge tube clamps, use with SCI-RL-E & SCI-RD-E
    Manufacturer: Scilogex
    SCILOGEX 15ml x 12 centrifuge tube clamps, use with MX-RL-E & MX-RD-E (1 per EA)
    Learn More
    was $16.00 Special Price $12.60
  20. Transferpette-12 electronic, 10-200uL
    Manufacturer: Brandtech Scientific
    Transferpette-12 electronic, 10-200uL (1 per EA)
    Learn More
    $1,603.00
  21. Pipette, Diamond PosiStop, Fully Autoclavable, 8-Channel, Adjustable volume, 0.5 - 10ul, Red
    Manufacturer: Globe Scientific
    Globe Scientific Diamond PosiStop Multi-Channel Pipettors The Diamond™ PosiStop™ 8-channel and 12-channel pipettors incorporate all the outstanding features of the single-channel variants and more. Building on the success of the Diamond™ APEX™ series, Globe Scientific is excited to offer the Diamond™ PosiStop™ range of LTS-compatible pipettors. The Diamond™ PosiStop™ line embodies the pinnacle of pipettor technology, combining unparalleled precision with exceptional user comfort. Precision and consistency: The magnetically assisted piston design ensures pinpoint accuracy and consistent repeatability in all pipetting actions, from the first to the second stop. This precision is further enhanced by our innovative spring and seal design, which results in one of the lowest plunger forces in the industry. Additionally, the unique silicone shock absorber in the tip ejection mechanism significantly reduces user fatigue, making lab work more comfortable. Built to cast: Durability is a key feature of the Diamond™ PosiStop™ pipettors, thanks to the robust PVDF material used for the tip cone and ejector. This resilience is matched with the confidence of being calibrated in an ISO17025 compliant facility. Plus, each pipettor comes with a 3-year warranty for complete peace of mind. Ergonomic excellence: Like the Diamond™ APEX™, the new LTS-compatible Diamond™ PosiStop™ pipettors excel in ergonomic design and ease of use. Experience the next chapter in the renowned legacy of Globe Scientific’s Diamond™ series of pipettors. Enhanced flexibility and precision: The Diamond™ PosiStop™ multi-channel pipettors boast a 360° rotating manifold, facilitating both vertical and horizontal positioning during aspirating or dispensing. This feature significantly improves ease of use and adaptability in various lab scenarios. Each channel is individually calibrated, ensuring uniformity and precision across all channels. Key features for optimal performance: • Fully autoclavable and UV resistant: Ensuring durability and adaptability in various laboratory environments • 3-Year warranty: Providing extended assurance of quality and performance • Color-coded plunger inserts: For quick and easy volume identification, streamlining your laboratory processes • Low plunger force: Offering a virtually fatigue-free pipetting experience • Magnetically assisted piston: Guarantees extremely high accuracy and consistency • Ergonomically designed and lightweight: Enhances comfort during prolonged use • Precise volume adjustment: Allows for exact measurements and control • Secure locking mechanism: Prevents accidental volume changes, ensuring reliable results • Available in adjustable and fixed volume models: Catering to diverse laboratory needs with specific requirements • Individually calibrated channels: Ensures consistent accuracy across all channels. • Removable manifold: Facilitates easy volume identification, optimizing workflow efficiency. • Available in 8-channel and 12-channel, adjustable volume models: Catering to diverse laboratory needs with specific requirements. (1 per EA)
    Learn More
    was $504.30 Special Price $367.72
  22. FX-i Series Precision Balance (External Calibration) 122 g x 0.001 g w/ Breeze Break (3.4in. high)
    Manufacturer: A and D Weighing
    A precision balance that combines all of the essential weighing functions in a compact, light-weight package. C-SHS Patented weighing technology Compact footprint with fast stabilization Dependable & durable IP65 and Legal for Trade (NTEP and MC) models available (1 per EA)
    Learn More
    was $1,495.00 Special Price $1,098.83
  23. Pipette, DiamondAPEX, Fully Autoclavable, Fixed Volume, 10000uL (10mL), Green (Tip Group F)
    Manufacturer: Globe Scientific
    Pipette, DiamondAPEX, Fully Autoclavable, Fixed Volume, 10000uL (10mL), Green (Tip Group F) (1 per EA)
    Learn More
    was $165.00 Special Price $120.31
  24. Phosphate & ResinTech® AGC 50/40 CSAW Taste, Odor and Chlorine Removal with Scale and Corrosion Inhibitor, 4.5in x 10in, Blue, 2.0 lbs. Phosphate, CS8
    Manufacturer: Aries Filterworks
    Aries Carbon & Phosphate cartridges are designed to improve drinking water aesthetics while simultaneously mitigating scale buildup. Premium granular activated carbon works to dramatically improve the taste and odor of drinking water by reducing chlorine, while Phosphate works to soften water, control scale and corrosion, and sequester iron, calcium and manganese. Sized to fit standard slimline and big blue housings. (8 per CS )
    Learn More
    was $835.12 Special Price $759.96
Filters
Set Descending Direction

8554 items

Page
per page
View as List Grid