Lab Equipment

At Laboratory Procurement Services (LPS) we are committed to offering a wide range of affordable laboratory equipment, from microscopes and centrifuges to electrophoresis systems, ultralow freezers and balances to researchers, educators, and healthcare professionals. Our mission is to ensure that the cost of equipment does not hinder progress in scientific research and innovation.

 LPS streamlines the procurement process, to allow our customers to spend more time performing the critical processes needed to help their company succeed.  Contact us today for assistance in selecting the best equipment for your requirements.

Before ordering equipment, check the electrical requirements: products are listed for specific voltages and frequencies, such as 120V/60Hz or 208-240V, and some need a dedicated circuit. Measure the space you have, including clearance for ventilation and door swing on refrigerators and freezers. Check what the unit needs to run, such as a water feed and replacement cartridges for water purification systems, electrodes and buffers for meters, or rotors and adapters for centrifuges, and confirm that parts and consumables are available for the model. If you work under a quality system, look for data logging, temperature monitoring or GLP features.

Equipment: common questions

What equipment does a biopharmaceutical lab need?

Most biopharmaceutical and life science labs rely on balances, pipettes and dispensers, centrifuges, mixers and shakers, incubators and water baths, laboratory refrigerators and ultralow freezers, pH and conductivity meters, and water purification systems. Cell culture work also needs biological safety cabinets and CO2 incubators. The exact list depends on the processes, sample types and regulatory requirements of the lab.

What is the difference between rpm and g-force on a centrifuge?

Rpm is how many times the rotor turns per minute. G-force, or relative centrifugal force (RCF), is the force actually applied to the sample, and it depends on both speed and rotor radius. Because rotors differ in radius, the same rpm can give different g-forces on different centrifuges, so many protocols specify x g. Most centrifuges can display or convert between the two.

What should I check on electrical equipment before ordering?

Confirm the voltage, frequency and plug type match your outlet; a 208-240V unit will not run on a standard 120V outlet. Check the current draw, since large freezers, chillers and ovens may need a dedicated circuit. Also allow the clearance around the unit that the manufacturer specifies for air flow and service.

How long does lab equipment take to arrive?

Many items ship directly from the manufacturer, so lead times vary by item. Orders can be placed online, and approved business accounts can pay by purchase order. For lead times or pricing on several items, contact LPS through the Contact Us page.

Equipment

Filters
Set Descending Direction

8554 items

Page
per page
View as List Grid
  1. Electronic Balance, AX2201/E
    Manufacturer: Ohaus Corporation
    Electronic Balance, AX2201/E (1 per EA)
    Learn More
    was $1,740.95 Special Price $1,553.84
  2. Stacking platform, small 10.5inx7.5in with dimpled mat (3.0in separation)
    Manufacturer: Benchmark Scientific
    Stacking platform, small 10.5in. x7.5in. with dimpled mat , 3.0in. separation , EA /1 (1 per EA)
    Learn More
    was $160.22 Special Price $143.00
  3. Electronic Balance,PR5202N/E
    Manufacturer: Ohaus Corporation
    Electronic Balance,PR5202N/E (1 per EA)
    Learn More
    was $2,035.95 Special Price $1,817.13
  4. Electronic Balance,PR6201N/E
    Manufacturer: Ohaus Corporation
    Electronic Balance,PR6201N/E (1 per EA)
    Learn More
    was $1,632.95 Special Price $1,457.45
  5. Electronic Balance, AX4202/E
    Manufacturer: Ohaus Corporation
    Electronic Balance, AX4202/E (1 per EA)
    Learn More
    was $2,761.95 Special Price $2,465.09
  6. Bench Scale, D52P50RQV3
    Manufacturer: Ohaus Corporation
    Multifunctional Stainless Steel Bench Scales for Standard Washdown Industrial Applications. Defender 5000 features software for parts counting, dynamic weighing, percent weighing, checkweighing, display hold for large containers and can meet traceability requirements. Multiple connectivity capabilities include built-in RS232 bi-directional interface and external input as well as optional RS422/485, second RS232 and AC or DC relay. The durable Defender 5000 has a stainless steel platform, form-and-weld frame, IP67 load cell, column and indicator bracket, as well as an indicator that is also 4X/IP66 rated. (1 per EA)
    Learn More
    was $3,202.95 Special Price $3,026.84
  7. Precision Balance AX623/E
    Manufacturer: Ohaus Corporation
    Intuitive Balances Designed for Routine Weighing (1 per EA)
    Learn More
    was $3,293.95 Special Price $2,939.89
  8. IncuView Integrated Microscop Shelf, 45L (For H3565-45 Only)
    Manufacturer: Benchmark Scientific
    IncuView Integrated Microscop Shelf, 45L (For H3565-45 Only) (1 per EA)
    Learn More
    was $5,104.61 Special Price $4,729.27
  9. Filter for Accuris Microplate Reader, 750 nm
    Manufacturer: Benchmark Scientific
    Filter for Accuris Microplate Reader, 750 nm, EA/1 (1 per EA)
    Learn More
    was $244.40 Special Price $218.13
  10. Piston rod protector (upper shaft)Transferpettor
    Manufacturer: Brandtech Scientific
    Piston rod protector (upper shaft)Transferpettor (1 per EA)
    Learn More
    $34.60
  11. 30 Cu. Ft. Flammable Material Refrigerator
    Manufacturer: American BioTech Supply
    Units come standard with microprocessor temperature controller, Touch Screen & Alarm module with audible and visual high/low temperature alarms, 24 hr. temperature chart, temperature & alarm data logging, °C/°F convertible temperature display, battery back-up, remote alarm contacts, and casters (1 per EA)
    Learn More
    was $12,180.00 Special Price $8,198.07
  12. UNDERCOUNTER & COUNTERTOP REFRIGERATORS 3ºC to 16ºC, 4.7 cu.ft., Auto Defrost, 115V
    Manufacturer: So-Lo Environmental
    UNDERCOUNTER & COUNTERTOP REFRIGERATORS 3ºC to 16ºC, 4.7 cu.ft., Auto Defrost, 115V (1 per EA )
    Learn More
    $1,695.20
  13. Electronic Balance, AX523N/E
    Manufacturer: Ohaus Corporation
    Electronic Balance, AX523N/E (1 per EA)
    Learn More
    was $3,230.95 Special Price $2,883.67
  14. MicroPette Plus Autoclavable Pipettor, 5μl
    Manufacturer: Scilogex
    MicroPette Plus Autoclavable Pipettor, 5µl (1 per EA)
    Learn More
    was $138.00 Special Price $109.20
  15. Electronic Balance, AX124/E
    Manufacturer: Ohaus Corporation
    Electronic Balance, AX124/E (1 per EA)
    Learn More
    was $3,781.95 Special Price $3,375.44
  16. MicroPette Pipettor, 250μl
    Manufacturer: Scilogex
    MicroPette Pipettor, 250µl (1 per EA)
    Learn More
    was $128.00 Special Price $100.80
  17. Extra paper rolls for MR9600-TP printer, pk/4
    Manufacturer: Benchmark Scientific
    Extra paper rolls for MR9600-TP printer, pk/4 (1 per EA)
    Learn More
    was $36.96 Special Price $32.99
  18. Block, 24 x1.5ml centrifuge tubes (conical)
    Manufacturer: Benchmark Scientific
    Block, 24 x1.5ml centrifuge tubes , conical , EA /1 (1 per EA)
    Learn More
    was $164.43 Special Price $155.86
  19. Bench Scale, D52P25RQR1
    Manufacturer: Ohaus Corporation
    Multifunctional Bench Scale for Standard Industrial Applications. User-friendly model with an easy-to-use keypad, large backlit display and plain text on-screen prompts which guide you through operation. Durable construction with a stainless steel platform, sand gray powder-coated steel frame & aluminum load cell. Defender meets NTEP/Measurement Canada or OIML/EC type approvals (depending on region). Features common industrial modes and supports a 50,000-item library with 1,000 user profiles for easy data management. Includes GMP/GLP with time/date for result traceability. (1 per EA)
    Learn More
    was $2,165.95 Special Price $2,046.87
  20. Bench Scale, D52P50RQV5
    Manufacturer: Ohaus Corporation
    Multifunctional Stainless Steel Bench Scales for Standard Washdown Industrial Applications. Defender 5000 features software for parts counting, dynamic weighing, percent weighing, checkweighing, display hold for large containers and can meet traceability requirements. Multiple connectivity capabilities include built-in RS232 bi-directional interface and external input as well as optional RS422/485, second RS232 and AC or DC relay. The durable Defender 5000 has a stainless steel platform, form-and-weld frame, IP67 load cell, column and indicator bracket, as well as an indicator that is also 4X/IP66 rated. (1 per EA)
    Learn More
    was $2,729.95 Special Price $2,579.85
  21. Precision Balance AX12001N/E
    Manufacturer: Ohaus Corporation
    Intuitive Balances Designed for Routine Weighing (1 per EA)
    Learn More
    was $3,518.95 Special Price $3,140.71
  22. Solid Block (for slides / machining)
    Manufacturer: Benchmark Scientific
    Solid Block , for slides / machining , EA /1 (1 per EA)
    Learn More
    was $164.43 Special Price $155.86
  23. Block, 8x5ml centrifuge tubes, for MultiTherm Touch
    Manufacturer: Benchmark Scientific
    Block, 8x5ml centrifuge tubes, for MultiTherm Touch (1 per EA)
    Learn More
    $426.64
  24. Horn, 2mm diameter, for 0.1-5ml, fits DP0150, fits DP0150 and DP0650
    Manufacturer: Benchmark Scientific
    Horn, 2mm diameter, for 0.1-5ml, fits DP0150, fits DP0150 and DP0650 (1 per EA)
    Learn More
    was $376.58 Special Price $356.97
Filters
Set Descending Direction

8554 items

Page
per page
View as List Grid