Microplates

Silicone sealing mats are made of research-grade silicone. They are chemically resistant and contain no adhesives or extractables to contaminate samples. Suitable for sealing rectangular 48-well storage and micro-plates, silicone mats provide sample protection while minimizing evaporation in a wide range of temperatures in incubation and storage applications. Silicone mats are especially good for sample processing or storage at higher temperatures or for applications involving aggressive solvents. Mats are suitable for high-throughput or other demanding applications involving accessing the sample through the cover multiple times. Each well has a perforation over every well that is cut 80% of the way through (but not all of the way). This allows sample access via pipettor, syringe, or probe. These scored perforations are designed to easily open to minimize coring and will seal themselves, after penetration, ensuring an airtight closure to the well. (50 per CS )

96 Well Plates, transparent, immunoGrade, U-Bottom, Pack 100 (100 per PK)

96 Well Plates, transparent, immunoGrade, V-Bottom, Pack 100 (100 per PK)

This pre-sterilized shared wall 8.5mm round well U-bottom plate combines optimized mixing and storage with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction Ideal for automation – high throughput screening, sample collection, compound storage, LC/MS, mixing, and combinatorial chemistry applications. Compatible with stackers, grippers, heater/cooler blocks, autosamplers, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. With stacking lugs to help prevent toppling. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from Virgin Polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification (50 per CS )

These deep well microplates are ideal for high throughput applications and storage of samples. They are compatible with sample processing workstations, microplate processing equipment and many microplate centrifuge rotors. Each of these plates has 96 round wells in a standard 8 x 12 format. Ideal for high throughput applications and storage of samples DNase/RNase free, sterile and non-sterile packaging Steel freezer storage racks available Bar coding available upon request (50 per PK )

Made of USP VI polypropylene. Autoclave at 121 /15 Ib. Non-pyrogenic, Dnase/Rnase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (50 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

384 Well Plate, black, pureGrade, Trans F-Bottom, Pack Of 50 (50 per PK)

Made of USP VI polypropylene. Autoclave at 121 /15 Ib. Non-pyrogenic, Dnase/Rnase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (50 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

96 Well Plate, black, pureGrade Sterile, Trans F-Btm,Pack 50 (50 per PK)

96 Well Plates, transparent, hydroGrade, U-Bottom, Pack 100 (100 per PK)

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

700ul 96-well plt, rd well, con V-bot, Glass Coated, Nat, Ind Wrap, 1 plt/pk, 10 pks/cs (100 per CS )

Made of USP VI polypropylene. Autoclave at 12C /15 Ib. Non-pyrogenic, Dnase/Rnase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (50 per CS )

Silicone cover for 384 well, deep well plate, 0.3mL,pk of 50 (50 per PK)

2.2 ml 96-Well Deep Well Plate, V Conical Bottom, Square well, non-sterile, 5/pk, 50/cs (50 per CS )

96 Well Plates, black, pureGrade Sterile, F-Btm, Pack Of 50 (50 per PK)

384 Well Plate, transparent, immunoGrade, F-Bottom, Pack 50 (50 per PK)

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 DNase/RNase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (50 per CS )

96 Well Plates, transparent, pureGrade, U-bottom,Pack Of 100 (100 per PK)