PCR Supplies

Prefilled 2.0ml tube, reinforced, with one 6mm ceria stabilized zirconium bead, pk 50 (1 per EA)

PCR 8-tube strip, 0.2mL, yellow, bag of 125 (125 per PK)

Labcon CAP, 12 STRIP FOR 1.2ML TUBES, NATURAL, CS800 (800 per CS )

QuickSnap 0.2mL 8-Strip Tubes, with Individually-Attached Flat Caps, Clear, Non-Sterile PK120 (1200 per CS)

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free (100 per CS )

200ul 96-well PCR Half Skirt, Elevated Wall (ABI style) Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

100ul 96-well PCR Full Skirt Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

Individual tubes with attached flat caps achieve even and precise thermal transfer to maximize your yield. Our standard profile, 0.2mL tubes with attached flat caps are precision molded for clarity and sample visualization. Flat caps are frosted for writing or labeling. Molded as a single part ensures a uniform fit for precise thermal transfer with minimal evaporation. Individual tubes with attached flat caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNase, DNA, and pyrogen contamination (10000 per CS )

Labcon CAP STRIP LIB 8-STRP ST, CS1250 (1250 per CS )

PCR 8-strip domed caps for 0.2mL tubes, blue, bag of 125 (125 per PK)

QuickSnap 0.2mL 8-Strip Tubes, with Individually-Attached Dome Caps, Assorted Colors (Blue, Red, Green, Yellow and Violet) (120 per PK)

Tube strips with attached flat caps make cross contamination and missing caps a thing of the past. Achieve even and precise thermal transfer to maximize your yield with our standard profile, 0.2ml well volume, 8-PCR tube with attached flat cap strips. Precision molded using only ultra-clear, virgin, medical grade polypropylene for clarity and sample visualization. These ILP attached tube and cap for PCR offer the same labeling surface. Molding as a single part ensures a uniform fit for precise thermal transfer with minimal evaporation. Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Each tube is joined to a cap making cross contamination with the wrong cap impossible. Their thin and consistent wall thickness optimizes heat transfer to maximize yield. Recommended for low to medium throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Caps are angularly attached to allow full loading of standard thermal blocks and racks. Durable bands between the wells keep these strips ridged, easy to handle, and durable. Sections of tubes will not inadvertently break apart but are easily cut with scissors into smaller sections or individual tubes. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNases, DNA, and pyrogen contamination (600 per CS )

PCR Tube Rack 96 well prep rack for PCR thin-walled tubes. Polypropylene. Conical shaped wells. Autoclavable. Holds 0.5mL microcentrifuge tubes. Lid included. 5 racks per pack. Fluorescent yellow. (5 per PK)

200ul 96-well PCR No Skirt plt, PP white, 10 plts/ut. 5 uts/cs (500 per CS )

PCR 8-strip domed caps for full skirt PCR plates, clear, bag of 300 (300 per PK)

Molded as a single part, our individual 0.2mL tube with attached optically clear flat cap achieve even and precise thermal transfer while minimizing evaporation in your qPCR. Precision molded using only ultra-clear, virgin, medical grade polypropylene for clarity and sample visualization. Optically clear flat caps are ideal for fluorescence detection, luminescence, and imaging techniques including qPCR. The upper surfaces are extremely clear and offer greatly improved light transmittance over standard flat caps. Light signals pass through uninhibited for consistent and reliable qPCR performance. Caps have longer cap flanges that produce a tight fit and reduce sample evaporation. Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNase, DNA, and pyrogen contamination. (10000 per CS )

PCR Cold Work Rack, SBS / ISBER Footprint, 4°C, 96 well for PCR Plates and Strips, Green to Yellow (10 per CS)

Made of USP VI polypropylene. Autoclave at 121C /15 Ib. Non-pyrogenic, DNase/RNase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (1250 per CS )

Made of USP VI polypropylene. Autoclave at 121C /15 Ib. Non-pyrogenic, DNase/RNase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (25 per CS )

PCR Cold Work Rack, 4°C, 96 well for PCR Plates and Strips, Purple to Pink (2 per PK)

PCR Cold Work Rack, 4°C, 96 well for PCR Plates and Strips, Green to Yellow (2 per PK)

24 well qPCR plate, PP, no skirt, 40 plates (40 per PK)

PCR Transfer Tray (5 per PK )

Ideal for all PCR protocols, these 0.2mL tubes and caps are made from polypropylene and are compatible with most popular thermal cycler blocks. (10000 per CS )