PCR Supplies

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free (1250 per CS )

Made of USP VI polypropylene. Autoclave at 121C /15 Ib. Non-pyrogenic, DNase/RNase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (1250 per CS )

For sample volumes of 2mL to 100mL Retention volume <115µL Maximum operating temperature: 100C autoclave at 125C for 15 min. Maximum operating pressure approximately 100 psi (10000 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified Dnase/Rnase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (50 per CS )

USP VI PolypropyleneEach tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally dropped. Laser 2D barcode on the bottom of each tube allows scan and decode at once without removing from rack.100% inspection guarantees that each code is unique and readable.Non-pyrogenic, DNase/RNase and human DNA free Round Bottom, Self-standingSolid, one-piece construction ensures the barcode not fall off during the storage under low temperatureAutoclavable Sterilized by E-beam, SAL=10-6 Clear graduations and white marking area Recommend to store in gas phase of the nitrogen tank Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid the contamination risk. (1200 per CS )

Made of USP VI polypropylene. Autoclave at 121C /15 Ib. Non-pyrogenic, DNase/RNase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (1 per EA )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free (100 per CS )

Made of USP VI polypropylene. Autoclave at 121C /15 Ib. Non-pyrogenic, DNase/RNase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (1250 per CS )

Made of USP VI polypropylene. Autoclave at 121C /15 Ib. Non-pyrogenic, DNase/RNase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (25 per CS )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 DNase/RNase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (1250 per CS )

Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents. Compatible with DMSO and inert to water. Can be stored under subzero temperature from -40 to -80 . Maximum sustainable centrifuge force 4000g. Autoclavable at 20Psi, 121 for 20 minutes, great heating uniformity. Minimum residual liquid, low heavy metal content. Certified DNase/RNase and Pyrogen Free. Conformed to international SBS Standards. Good flatness and can be transported for long distance after sealing by heat sealable film. Produced and packed in Class 100,000 clean workshop. Alphabetical sorting and cut angle mark for convenient tracking of samples. Each package has a separate article number/batch number identification, facilitating the quality tracking. (100 per CS )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free (50 per CS )

USP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safe lock cap design provides secure lid sealing Easy opening and closing Temperature range: -80 to +121 DNase/RNase free Tubes are autoclavable at 121C (250F), under 15psi for 10–15 minutes with drying. Remove from autoclave immediately. Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Also available as pre-sterilized (1250 per CS )

This product is easy to open and close, and can effectively seal the deep well plate, which is convenient for operation and saves time.Good sealing performance can prevent the volatilization of a variety of solvents.Withstand a wide temperature range (- 50 - 200 ) and is suitable for various experiments.Excellent chemical corrosion resistance and is used for low-temperature preservation.The pre-opening design allows the pipette tip to enter the hole without damage to the silicone sealing mat cover. (100 per CS )

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free (50 per CS )

Easy Press and Mini sealer offer easier-operating and time-consuming options. Good airtightness offer unsurpassed protection for volatile solvents. Chemically resistant, pierceable thermoplastic elastomer well caps are excellent for strong to -80 . Silicone pre-slit well caps permit a pipette tips or probe to enter the well without damage to the cap. (100 per CS )

Made of polystyrene. Conform to SBS/ ANSI. Both detachable and undetectable plates are available. Flat and clear bottom. Excellent well uniformity, CV <5% Non-sterile, DNase/RNase and Human DNA Free, Non-pyrogenic. (100 per CS )

This product is easy to open and close, and can effectively seal the deep well plate, which is convenient for operation and saves time.Good sealing performance can prevent the volatilization of a variety of solvents.Withstand a wide temperature range (- 50 - 200 ) and is suitable for various experiments.Excellent chemical corrosion resistance and is used for low-temperature preservation.The pre-opening design allows the pipette tip to enter the hole without damage to the silicone sealing mat cover. (100 per CS )

Made of USP VI polypropylene. Autoclave at 121C /15 Ib. Non-pyrogenic, DNase/RNase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (1250 per CS )

This product is easy to open and close, and can effectively seal the deep well plate, which is convenient for operation and saves time.Good sealing performance can prevent the volatilization of a variety of solvents.Withstand a wide temperature range (- 50 - 200 ) and is suitable for various experiments.Excellent chemical corrosion resistance and is used for low-temperature preservation.The pre-opening design allows the pipette tip to enter the hole without damage to the silicone sealing mat cover. (100 per CS )

Made of USP VI polypropylene. Autoclave at 121C /15 Ib. Non-pyrogenic, DNase/RNase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (50 per CS )

Easy Press and Mini sealer offer easier-operating and time-consuming options. Good airtightness offer unsurpassed protection for volatile solvents. Chemically resistant, pierceable thermoplastic elastomer well caps are excellent for strong to -80 . Silicone pre-slit well caps permit a pipette tips or probe to enter the well without damage to the cap. (100 per CS )

Nest adhesive sealing film minimizes evaporation in a wide range of temperatures in storage applications. Nest adhesive sealing film minimizes evaporation in a wide range of temperatures in storage applications. (100 per CS )

Easy Press and Mini sealer offer easier-operating and time-consuming options. Good airtightness offer unsurpassed protection for volatile solvents. Chemically resistant, pierceable thermoplastic elastomer well caps are excellent for strong to -80 . Silicone pre-slit well caps permit a pipette tips or probe to enter the well without damage to the cap. (100 per CS )