Life Science

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Manufactured from medical grade virgin polystyrene 35, 60, 70 and 100mm dishes available with a gripping feature for improved handling Vented lids contain molded spacers to allow gas exchange, and stacking rings for increased stability (60 per CS)

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Manufactured from medical grade virgin polystyrene 35, 60, 70 and 100mm dishes available with a gripping feature for improved handling Vented lids contain molded spacers to allow gas exchange, and stacking rings for increased stability (60 per CS)

100mm x 20mm Tissue Culture Treated Dish, Sterile (300 per CS )

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Manufactured from medical grade virgin polystyrene 35, 60, 70 and 100mm dishes available with a gripping feature for improved handling Vented lids contain molded spacers to allow gas exchange, and stacking rings for increased stability (100 per CS)

Tissue Culture Treated Roller Bottles have uniform hydrophilic surface ideal for consistent cell attachment Vented or non-vented cap for open or closed systems Easy-to-read black printed graduations Large knurled cap for easy grip (24 per CS)

Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment Stable base enables filling with flask standing upright 182cm2 flask offers more growth area than standard 175cm2 flasks 300cm2 flask offers a large culture area with the convenience of a single layer flask Convenient zip-closure bag is a practical alternative to folding and taping opened bags Vent caps feature 0.22µm hydrophobic membrane Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers Molded, interlocking T design for improved stacking - included on 75, 182 & 300cm² and 250, 600 & 850mL size flasks only Flask is printed with lot number and expiration date for easy identification and tracking Angled design is easier to access than square or U-shaped flasks (25 per CS)

Expanded spacing of wells helps reduce cross contamination Well diameter similar to 24 well plate Smaller footprint than standard multiple well plates Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (50 per CS)

Vented or non-vented cap for open or closed systems Easy-to-read black printed graduations Large knurled cap for easy grip (12 per CS)

Ultra-thin tube walls provide uniform and efficient heat transfer Avoid sample loss from evaporation with easy open and close caps Angled attached caps prevent interference when several strips are racked simultaneously Certified RNase/DNase/PCR Inhibitor/DNA-free and non-pyrogenic to ensure reliable experimental results 230461 and 230462 strips feature easily separable tubes to customize strips 230463 strips feature robust inter-well linkages, increasing stability and preventing spills White tubes with attached optically clear caps enhance weak fluorescent signals (230465) All flat caps (excluding 230455) are optically clear Tube only strips feature molded tube numbers (125 per CS )

6 Well Tissue Culture Plate with Lid, Individual, Sterile (50 per CS )

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (24 per CS)

Ultra-thin tube walls provide uniform and efficient heat transfer Avoid sample loss from evaporation with easy open and close caps Angled attached caps prevent interference when several strips are racked simultaneously Certified RNase/DNase/PCR Inhibitor/DNA-free and non-pyrogenic to ensure reliable experimental results 230461 and 230462 strips feature easily separable tubes to customize strips 230463 strips feature robust inter-well linkages, increasing stability and preventing spills White tubes with attached optically clear caps enhance weak fluorescent signals (230465) All flat caps (excluding 230455) are optically clear Tube only strips feature molded tube numbers (120 per CS )

Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment Stable base enables filling with flask standing upright 182cm2 flask offers more growth area than standard 175cm2 flasks 300cm2 flask offers a large culture area with the convenience of a single layer flask Convenient zip-closure bag is a practical alternative to folding and taping opened bags Vent caps feature 0.22µm hydrophobic membrane Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers Molded, interlocking T design for improved stacking - included on 75, 182 & 300cm² and 250, 600 & 850mL size flasks only Flask is printed with lot number and expiration date for easy identification and tracking Angled design is easier to access than square or U-shaped flasks (100 per CS)

Grow cells directly on the slide without any need for future transfer; ideal for growing and viewing cells under a microscope on standard 25mm x 75mm slide Uniform hydrophilic surface ideal for consistent cell attachment Slides are labeled with numeric markings Packing trays can be used as incubation racks in CO2 incubators Adhesive free Reusable slide tray available (PN 229167) Integrated gasket prevents cross-contamination between chambers Inert hydrophobic green border printed on slide to define cell culture area Chamber holder features easy flip locks assembly and disassembly; no separation tool required (12 per CS)

Optimize time, incubator space, and resources with tissue culture-treated Multiple Layer Flasks Compact design shares the same footprint as 182cm2 flasks Flasks are available with 3 or 5 layers, and may be stacked for even more space saving (8 per CS )

PCR Tube, 0.2mL, Optically Clear Flat Cap, Clear, CS1000 (1000 per CS )

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (12 per CS)

96 Well Tissue Culture Plate with Lid, Individual, Sterile (50 per CS )

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (100 per CS)

Cell Scraper, 25cm Handle, 12mm Narrow Blade, Sterile (100 per CS )

PCR 8-Strip Tubes, 0.2mL, Attached Flat Caps, Clear, CS120 (120 per CS )

150cm2 Tissue Culture Flask - Vent Cap, Sterile (50 per CS )

Cell Strainer, 100μm, Yellow, Individually Wrapped, Sterile (50 per CS )

Compatible with bottle top filters or for use as solution storage containers (Bottle Top Filters sold separately, see page 63) Solution bottle neck size is 45mm Curved bottle design for easy handling (24 per CS)