Life Science

Cell Scraper, 30cm Handle, 20mm "Pivoting" Blade, Sterile (100 per CS)

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (24 per CS)

Replacement caps available for Tissue Culture Flasks (5 per CS)

Mimic a variety of in vivo conditions with 2 membrane materials and 4 porosities Inserts center in wells, which allows pipette access to lower chamber, and prevents wicking between insert and side wall Inserts hang above tissue culture-treated wells, allowing co-culture; grow cells on both the insert membrane and the well bottom 0.1µm and 0.4µm PET inserts feature clear membranes for improved cell viewing PC membrane is best for cell attachment; PET is best for imaging and microscopy 0.1µm and 0.4µm pore sizes are ideal for cell-cell interaction and drug transport studies 3.0µm and 8.0µm pore sizes are ideal for angiogenesis, migration, and chemotaxis experiments (24 per CS )

Mimic a variety of in vivo conditions with 2 membrane materials and 4 porosities Inserts center in wells, which allows pipette access to lower chamber, and prevents wicking between insert and side wall Inserts hang above tissue culture-treated wells, allowing co-culture; grow cells on both the insert membrane and the well bottom 0.1µm and 0.4µm PET inserts feature clear membranes for improved cell viewing PC membrane is best for cell attachment; PET is best for imaging and microscopy 0.1µm and 0.4µm pore sizes are ideal for cell-cell interaction and drug transport studies 3.0µm and 8.0µm pore sizes are ideal for angiogenesis, migration, and chemotaxis experiments (24 per CS )

Tissue Culture Treated Roller Bottles have uniform hydrophilic surface ideal for consistent cell attachment Vented or non-vented cap for open or closed systems Easy-to-read black printed graduations Large knurled cap for easy grip (12 per CS)

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Manufactured from medical grade virgin polystyrene 35, 60, 70 and 100mm dishes available with a gripping feature for improved handling Vented lids contain molded spacers to allow gas exchange, and stacking rings for increased stability (500 per CS)

Useful for high volume and robotic screening of DNA libraries as well as manual plating Same footprint as standard multiple well plates Suitable for dot-blotting bacterial clones on 11.4 x 7.3cm (4.5 x 2.875in) nylon membranes Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (50 per CS)

Vented or non-vented cap for open or closed systems Easy-to-read black printed graduations Large knurled cap for easy grip (24 per CS)

500mL Suspension Culture Flask - Vent Cap, Sterile (50 per CS )

Grow cells directly on the slide without any need for future transfer; ideal for growing and viewing cells under a microscope on standard 25mm x 75mm slide Uniform hydrophilic surface ideal for consistent cell attachment Slides are labeled with numeric markings Packing trays can be used as incubation racks in CO2 incubators Adhesive free Reusable slide tray available (PN 229167) Integrated gasket prevents cross-contamination between chambers Inert hydrophobic green border printed on slide to define cell culture area Chamber holder features easy flip locks assembly and disassembly; no separation tool required (12 per CS)

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (12 per CS)

48 Well Tissue Culture Plate with Lid, Individual, Sterile (100 per CS )

24 Well Tissue Culture Plate with Lid, 5/Pack, Sterile (100 per CS )

Ultra-thin tube walls provide uniform and efficient heat transfer Avoid sample loss from evaporation with easy open and close caps Angled attached caps prevent interference when several strips are racked simultaneously Certified RNase/DNase/PCR Inhibitor/DNA-free and non-pyrogenic to ensure reliable experimental results 230461 and 230462 strips feature easily separable tubes to customize strips 230463 strips feature robust inter-well linkages, increasing stability and preventing spills White tubes with attached optically clear caps enhance weak fluorescent signals (230465) All flat caps (excluding 230455) are optically clear Tube only strips feature molded tube numbers (120 per CS )

8 Chamber Cell Culture Slide, No Marking Spot, Glass, Sterile, 6/Tray with 2 Trays/Box (12 per CS )

182cm2 Tissue Culture Flask - Vent Cap, Sterile (40 per CS )

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (12 per CS)

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Manufactured from medical grade virgin polystyrene 35, 60, 70 and 100mm dishes available with a gripping feature for improved handling Vented lids contain molded spacers to allow gas exchange, and stacking rings for increased stability (500 per CS)

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (24 per CS)

96 Well Tissue Culture Plate, Round Bottom with Lid, Individual, Sterile (100 per CS )

656cm2 Tissue Culture Treated Cell Tower, 1 Layer, Vent Cap, Sterile (8 per CS )

1296cm2 Tissue Culture Treated Cell Tower, 2 Layer, Vent Cap, Sterile (4 per CS )

PCR 8-Strip Tubes, 0.2mL, Separable, Attached Dome Caps, Clear, CS120 (120 per CS )