Glassware

Condensers Friedrich Full Length [standard taper] Joints [standard taper] Joints 24/40. Jacket Length (mm) 225. Hose Connections #2. Approx. Overall Height (mm) 325 Specially designed to provide a long vapor path good heat transfer and anti-flooding characteristics. (1 per EA)

Condensers Graham Full Length [standard taper] Joints [standard taper] Joints 24/40. Jacket Length (mm) 200. Approx. Condensing Area (cm2) 164. Hose Connections #2. Approx. (1 per EA)

Condensers Liebig Full Length [standard taper] Joints [standard taper] Joints 24/40. Jacket Length (mm) 100. Approx. Condensing Area (cm2) 41. Hose Connections #2. Approx. (1 per EA)

KIMAX Culture Tube with PTFE-Faced Rubber-Lined Screw Cap Reusable. Features a large marking spot. Threaded phenolic cap can be loosened for autoclaving. Designed from ASTM Specification E982 Type VI Class B requirements. Sizemm: 20x150. Volume: 30ml. GPI thread: 18-415. (192 per CS )

Condensers West Full Length [standard taper] 24/40 Joints [standard taper] Joints 24/40. Jacket Length (mm) 100. Approx. Condensing Area (cm2) 34. Hose Connections #2. Approx. (1 per EA)

Condensers Allihn Full Length [standard taper] Joints [standard taper] Joints 34/45. Jacket Length (mm) 190. Hose Connections #2. Approx. Overall Height (mm) 275 Allihn reflux condenser with a straight outlet tube at top and a water cooled [standard taper] inner drip joint at bottom. (1 per EA)

Condensers Reflux Coil Type Full Length [standard taper] 24/40 Joints [standard taper] Joints 24/40. Coil Height (mm) 200. Approx. Condensing Area (cm2) 192. Hose Connections #2. Approx. (1 per EA)

Condensers Reflux Coil Type Full Length [standard taper] 24/40 Joints [standard taper] Joint 24/40. Cold Finger Length (mm) 225. Approx. Condensing Area (cm2) 474. Hose Connection #2. Approx. Overall Height (mm) 420 Reflux condenser with an internal coil-type cold finger. (1 per EA)

Condensers Large Capacity Full Length [standard taper] 29/42 Joints [standard taper] Joints 29/42. Jacket Length (mm) 500. Approx. Condensing Area (cm2) 900. Hose Connections #2. Approx. (1 per EA)

Tubes Fermentation Large 17 x 140 Vertical Tube O.D. and Length (mm) 17 x 140. Bulb O.D. (mm) 38 KIMAX tube with a bulb and a glass foot. Larger in size than 46150. Vertical tube has a closed rounded top. (1 per EA)

Distillation and Reactors Column Improved Snyder [standard taper] Joints 24/40. Column x Chamber Length (mm) 170 x 50. Number of Chambers 3. Approx. Overall Height (mm) 250 Improved design speeds evaporation and reduces hold-up within the column. Recoveries are excellent i.e. (1 per EA)

Petrochemical Apparatus Filter Stick with Hooks and Springs Complete Apparatus used in the determination of oil content and solvent extractables in petroleum waxes. (1 per EA)

Condensers Cold Finger [standard taper] Joint [standard taper] Joint 29/42. Hose Connections #2. Approx. Overall Height (mm) 305. Approx. Length Below Joint (mm) 195 Extended offset lower tip for drop control. (1 per EA)

Distillation and Reactors Head Variable Reflux with PTFE Plugs Column [standard taper] Joint 24/40. Condenser [standard taper] Joints 29/42. Receiver [standard taper] Joint 24/40. Hose Connections #2. Approx. (1 per EA)

Concentrators Column Micro Distilling Without Hooks Number of Chambers 3. [standard taper] Joint 19/22. Column x Chamber Height (mm) 100 x 15. Approx. Overall Height (mm) 122 Micro-type distilling column designed to prevent flooding while retaining residue material. (1 per EA)

KIMAX Glass Stirring Rods Rounded annealed ends. Designed from Federal Specification NNN-R-560 Type I requirements. Measurements: 125Lx4mm diameter. (800 per CS )

Filtration Microfiltration Assembly 25 mm with Fritted Glass Support Ultra-Ware (3) Fritted Glass Support Base 25 mm The 25 mm vacuum microfiltration assemblies are designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. (1 per EA)

HPLC Sparging Manifold 3-Place ULTRA-WARE CTFE Valve Stem Short (1 per EA)

HPLC Adapter PTFE GL 45 to [standard taper]40/35 ULTRA-WARE Adapter PTFE 45 mm to [standard taper] 40/35 This adapter converts GL 45 threads to [standard taper]40/35 inner joints. (1 per EA)

HPLC Adapter Solvent Pickup ULTRA-WARE Valve Plug Assembly Std. Designed to be used with the Five Valve Four Valve and Filtration caps to provide safe in-line filtration that replaces the traditional pour-and-wait funnel filtration method. (1 per EA)

HPLC Conversion Base 90 mm ULTRA-WARE Support Frit 90 mm Converts the Five Valve Four Valve and Filtration caps to use 90 mm filter membranes providing up to four times faster filtration. (1 per EA)

HPLC Filtration Cap ULTRA-WARE (3) Hose Barb PFA 1/4 Body is constructed of glass-filled PTFE with a vacuum adapter for 1/4 I.D. tubing. Upper screw clamp holds a solvent pickup adapter or funnel. Coarse fritted glass filter support is removable. Supplied with a PTFE/propylene o-ring. (1 per EA)

HPLC ULTRA-WARE Fittings Kit THF-Resistant Inlet Filter for 1/8 O.D. Tubing This kit contains all of the tube fittings adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps. Not recommended for use with THF or chlorinated hydrocarbons. (1 per EA)

Chromatography UNIONS This externally threaded union is used to make a connection between two internally threaded 1/4-24 ports. Material CTFE Union M1/428 to M1/4-28 (1 per EA)