Glassware

Distillation and Reactors Receiver Cow-Type Distribution Adapter Cow-type design having three receivers spaced 45 apart. Condensers with drip joints will protrude into the spherical section keeping wetted surfaces and product hold-up to a minimum. (1 per EA)

Stopcock Nylon 3-Way Pk/10 (10 per CS )

Tubes Color Comparison AOCS Length (mm) 154. Approx. I.D. (mm) 19. Approx. O.D. (mm) 22. Rings Distance from Inside Bottom (mm) 25.4 67 133 With the Shadowless Bottom feature.

Tubes Color Comparison Low Form Nessler (Unmatched) Grad. at (mL) 50 100. Approx. O.D. and Height (mm) 32 x 200. Scale Length (mm) 145-158 With the Shadowless Bottom feature. Rings and legend are durable white ceramic enamel. Rings coincide with specific volumes of liquid.

Condensers Friedrich Full Length [standard taper] Joints [standard taper] Joint 45/50. Cold Finger Length (mm) 190. Hose Connections #2. Approx. Overall Height (mm) 340 Water inlet and outlet located above ring-sealed inner condensing tube. (1 per EA)

KIMAX Viscosity Tube For rough control work where bubble comparison is made to limit varnish samples of known viscosity reference ASTM D 1545. 114mm long with 10.75 +-0.125 mm ID. With durable white ceramic enamel lines at 27 100 and 108mm from the outside bottom. (144 per CS )

Distillation and Reactors Receiver Moisture Test Capacity (mL) 20. [standard taper] Joints 24/40. Graduations x Subdiv. (mL) 0-3 x 0.23-20 x 0.5. Approx. Overall Height x Width (mm) 355 x 130 Dean Stark design for solvents that are either heavier or lighter than water. (1 per EA)

Distillation and Reactors Apparatus Ammonia Nitrogen Flask Cap. (mL) 1000. [standard taper] Joints 24/40. Hose Connections #2. Approx. Overall Height x Width (mm) 595 x 310 For determining the proteinaceous nitrogen content in water. (1 per EA)

KIMAX Glass Stirring Rods Rounded annealed ends. Designed from Federal Specification NNN-R-560 Type I requirements. Measurements: 375Lx10mm diameter. (200 per CS )

Flowmeters FLOW-WATCHMAN Hose Connections #1. Maximum (psig) 10. Approx. Overall Height x Width x Thickness (mm) 57 x 76 x 12 A device for the visual indication of liquid flow. Flow indication is visible up to 25 feet or more away from the unit. (1 per EA)

Septa PTFE/Red Rubber. Flat disc septa for screw caps are packaged in clear plastic bags. Economical good resealability. PTFE facing provides a barrier for product contact. Thickness: 0.05/1.52mm. Fits GPI thread size 18-400. (144 per CS )

Filtration Microfiltration Assembly 25 mm with Fritted Glass Support Ultra-Ware (2) Anodized Aluminum Clamp 25 mm The 25 mm vacuum microfiltration assemblies are designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. (1 per EA)

Chromatography FLANGELESS FITTINGS Plug - Used to seal ports with flat bottom 1/4-28 threads Material ETFE Nut Plug 1/4-28 Thread Flangeless fittings eliminate the need to flange (flare) PTFE tubing to make a connection. (1 per EA)

HPLC Conversion Base 90 mm ULTRA-WARE Upper Screw Clamp 90 mm Converts the Five Valve Four Valve and Filtration caps to use 90 mm filter membranes providing up to four times faster filtration. (1 per EA)

Extraction Apparatus Continuous Liquid/Liquid Heavier Than Water Extractor Body [standard taper] 45/50 Top [standard taper] 24/40 Side 100 mm O.D. Extractor body designed for EPA priority pollutant samples where the extracting solvent is heavier than water. (1 per EA)

Extraction Body Soxhlet Body I.D. x Length (mm) 31 x 135. Top [standard taper] Joint 34/45. BottomTS Joint 24/40. Approx. Overall Height (mm) 270 Extractor body only used as component part of 585000 585050 and 585250 Soxhlet extraction assemblies. (1 per EA)

3mL B Blue Blood Typing Color-Coded Tubes (1000 per CS )

Prelabeled Culture Tube Disposable. Borosilicate glass. For use in cell washers and water baths as writing on label is permanent. Fused-on yellow label provides ideal surface for marking. Label size is 19x34.9mm. Tube size is 12x75mm. Volume: 5mL. (1000 per CS )

Gas Sampling Tube with PTFE Valves Capacity (mL) 125. GPI Thread Size 13-425. Approx. Overall Height x Width (mm) 90 x 345 Designed for the collection and storage of environmental samples. High vacuum valves are provided for evacuation and filling. (1 per EA)

Labsets kits Organic Chemistry Microscale Threaded / [standard taper] 14/10 Basic Basic [standard taper] 14/10 Microscale Kit The 746000 Series MICROFLEX Kits feature [standard taper] 14/10 standard taper connections. (1 per EA)

Labsets kits Organic Chemistry Microscale Threaded Research MICROFLEX Standard Threaded Microscale Kit The 747000 Series MICROFLEX Kits feature versatile threaded chaste connections. They can be assembled rightside up or upside down providing great versatility. (1 per EA)

Adapters Rotary Evaporator Vial Adapter Systems PTFE GPI Thread Size 20-400. [standard taper] Joint 19/22. Approx. Overall Height (mm) 55 Design provides for expanded volume for organic mixtures that have a tendency to foam excessively. (1 per EA)

Microscale Vacuum Manifold 6-Place Microscale Threaded (GPI 13-425) GPI Thread Size 13-425. Approx. Overall Width x Height (mm) 200 x 40 Designed for the concentration of multiple samples using an inert atmosphere or vacuum. Also useful for molecular distillation. (1 per EA)

Stopcocks Straight Bore PTFE Plug PS Stopcock Size Bore (mm) 2. Plug Size (mm) 11/25. Approx. Stem O.D. (mm) 8 With a 1:5 taper PTFE plug and a threaded pressure nut. The more exaggerated taper permits easier use at higher than ambient temperatures. (1 per EA)