Accessories

PTFE/Silicone Rubber Septa For sampler storage. Recommended for use in all autosamplers using screw-thread vials. Resists coring. Flat disc septa for screw caps are packaged in clear plastic bags. Autoclavable. Fits GPI thread Size: 15-425. Thickness: 0.12/1.5mm. (144 per CS )

KIMAXbrand Culture TubeBorosilicate glass. Disposable. Size (mm) 25 x 150. Complies with ASTM Specification E438 Type I Class B. Offers chemical resistance against sodium leaching. Shrink wrapped. Designed from ASTM Specification E890. (500 per CS )

Vacuum airless Bubbler Gas Body O.D. (mm) 25. Approx. Overall Height x Width (mm) 185 x 80 Used with mineral oil to observe gaseous addition to reactions. May be used to vent a reaction mixture to the atmosphere. Tubing connections are 8 mm O.D. (1 per EA)

Flowmeters FLOW-WATCHMAN Hose Connections #1. Maximum (psig) 10. Approx. Overall Height x Width x Thickness (mm) 57 x 76 x 12 A device for the visual indication of liquid flow. Flow indication is visible up to 25 feet or more away from the unit. (1 per EA)

Septa PTFE/Red Rubber. Flat disc septa for screw caps are packaged in clear plastic bags. Economical good resealability. PTFE facing provides a barrier for product contact. Thickness: 0.05/1.52mm. Fits GPI thread size 18-400. (144 per CS )

Filtration Microfiltration Assembly 25 mm with Fritted Glass Support Ultra-Ware (2) Anodized Aluminum Clamp 25 mm The 25 mm vacuum microfiltration assemblies are designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. (1 per EA)

Chromatography FLANGELESS FITTINGS Plug - Used to seal ports with flat bottom 1/4-28 threads Material ETFE Nut Plug 1/4-28 Thread Flangeless fittings eliminate the need to flange (flare) PTFE tubing to make a connection. (1 per EA)

HPLC Conversion Base 90 mm ULTRA-WARE Upper Screw Clamp 90 mm Converts the Five Valve Four Valve and Filtration caps to use 90 mm filter membranes providing up to four times faster filtration. (1 per EA)

Filtration Microfiltration Assembly 25 mm with Fritted Glass Support Ultra-Ware (3) Fritted Glass Support Base 25 mm The 25 mm vacuum microfiltration assemblies are designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. (1 per EA)

HPLC Sparging Manifold 3-Place ULTRA-WARE CTFE Valve Stem Short (1 per EA)

HPLC Adapter PTFE GL 45 to [standard taper]40/35 ULTRA-WARE Adapter PTFE 45 mm to [standard taper] 40/35 This adapter converts GL 45 threads to [standard taper]40/35 inner joints. (1 per EA)

HPLC Adapter Solvent Pickup ULTRA-WARE Valve Plug Assembly Std. Designed to be used with the Five Valve Four Valve and Filtration caps to provide safe in-line filtration that replaces the traditional pour-and-wait funnel filtration method. (1 per EA)

HPLC Conversion Base 90 mm ULTRA-WARE Support Frit 90 mm Converts the Five Valve Four Valve and Filtration caps to use 90 mm filter membranes providing up to four times faster filtration. (1 per EA)

HPLC Filtration Cap ULTRA-WARE (3) Hose Barb PFA 1/4 Body is constructed of glass-filled PTFE with a vacuum adapter for 1/4 I.D. tubing. Upper screw clamp holds a solvent pickup adapter or funnel. Coarse fritted glass filter support is removable. Supplied with a PTFE/propylene o-ring. (1 per EA)

HPLC ULTRA-WARE Fittings Kit THF-Resistant Inlet Filter for 1/8 O.D. Tubing This kit contains all of the tube fittings adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps. Not recommended for use with THF or chlorinated hydrocarbons. (1 per EA)

Chromatography UNIONS This externally threaded union is used to make a connection between two internally threaded 1/4-24 ports. Material CTFE Union M1/428 to M1/4-28 (1 per EA)

Fritted ware Tube Fritted Gas Dispersion Approx. Cylinder Height x O.D. (mm) 24 x 13. Porosity C. Stem Dia. (mm) 8. Approx. Overall Height (mm) 250 Gas dispersion tube with a hollow fritted cylinder at the end of the tube. Available with a coarse (C) or extra coarse (EC) porosity cylinder. (1 per EA)