Glassware

Sparging accessory for vertical sidearm spinner flasks 316L electropolished SST, 1/4" OD; 10micron porosity frit .040" holes for aeration of fermentation cultures where shear force is less critical. Includes PP cap with 1/4" white compression fitting and white silicone gasket DIMENSIONS: 18 1/2 X 4 4/2" (1 per EA )

Splash Head Sloping Pear Shape, Cone size to fit flask 24/29, to fit condenser 24/29 (1 per EA )

Manufactured from medium wall Borosilicate Glass Type 1 Class A, with permanent graduations designed for DNA/RNA protocols. Includes high temperature red PBT cap with PTFE faced silicone liner. Replacement cap 5639-90045 (2 per CS )

The Bellco Auto-blot Micro Hybridization Oven consists of an incubator with an integral rotisserie device. The rotisserie has the capacity for up to 4 large hybridization bottles or 8 small hybridization bottles. Alternatively, any combination of large or small bottles can be used. This Auto-blot Micro Hybridization Oven features an advanced temperature controller for precise control of oven temperature. Ext: 14”x17”x13” (35x42x32cm) 115v (1 per EA )

Hi-torq SST OHD impeller assembly, short width Size: 15l For hi-torq motor & cap assembly (7774-40115/40230 & 7764-74000) Similar to 1964-60115 but to accept 1/2" shaft from 7764-74000 cap assembly Material: SST 316L Paddle size: 3" tall x 7 1/2" wide (1 per EA )

The culture tube rack is designed for roller culture tubes. Manufactured from 303 stainless steel construction. Includes spring clips that prevent tubes from moving in the rack. SST WIRE RACK FOR 38mm OD TUBES, SPACING: 2x6 - HOLDS 12 TUBES, DIMENSIONS: 10" WIDE X 3 1/2" DEEP X 2 7/8" TALL, EACH OPENING IN RACK: 1 9/16" (39.6mm). WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .162"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

Gas Generator Kipp's 500ml, borosilicate glass (1 per EA )

Pipette, Serological, Globe Glass, Reusable, 25mL, To Deliver (TD), 0.1 Graduations, White Band, ASTM E1044 (12 per CS)

Ideal use for over head drive vessels. Description: 6L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, and Drive Shaft Paddle [A523-214]: PTFE material, 171.5mm wide x 76.2mm tall x 1.6mm thick Plug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.) Paddle Holder [A542-50]: PTFE, 279.4mm long x 19.1mm OD Drive Shaft [A542-46]: 316L SST, 190.5mm long x 6.4mm OD (approx.) (1 per EA )

Bellco manufactures all precision pipettes from type 1 class a Borosilicate glass. All bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. Plain top promotes rapid even flow with a calibrated to tip -tempered tip; to deliver; blow out. (250 per CS )

The 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4" tubes. Flask only. Specifications: Accepts All Standard Fittings And Probes 316L Stainless Steel Cap Seal with compression fittings for probes/tube insertion. 4 sidearms positioned 90° for increased capabilities. Accessories: 1965-11400 Flask Only, 1L 1965-60014 SST Cap seal, 1L, 5 port with IOB 1965-13400 Flask Only, 3L 1965-60034 SST Cap seal, 3L, 5 port with IOB 1965-45200 45mm Plug w/Compression Fitting & Hose Barb. (1 per EA )

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 70mm Flask size: 500ml Dimensions: 110 x 180mm Sidearm cap: 45mm (1 per EA )

Still Head Plain, with thermometer socket B14, Cone size to fit flask 14/23 & to fit condenser 14/23 (1 per EA )

Wide-Tip Volumetric Pipets, 25 mL (6 per PK )

Petri Dish, outer dia 15cm, Soda glass (1 per EA )

Still Head Plain, with thermometer socket B14, Cone size to fit flask 19/26 & to fit condenser 19/26 (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Includes long skirted screw cap with nontoxic white rubber liner. Extra long working area yet short overall length for convenient handling. The short neck provides easy entry and removal of cover slips. (36 per CS )

Accessory That Fits Thru A Headplate And Holds The Rtd Sensor Which Monitors The Temperature In A Bioreactor. These Thermowells Are Designed Specifically For The Bellco Control Systems And Fit Through A 5/16" Fitting On The Stainless Steel Headplate. (1 per EA )

The bellco sample system attaches to the headplate of a bioreactor allowing the user to take repeated aseptic samples into a standard 50ml disposable conical tube. The sampler is designed to connect to an existing pipe by mounting under the nut of a headplate stud. Samples are taken by evacuating air with the supplied syringe & filter, thereby drawing culture into the 50ml disposable cent. tube. The Bellco Sampler can be used on third party vessels that meet the arm and clearance dimensions. For Omni Vessels. (1 per EA )

8L FLAT BOTTOMED OMNI VESSEL 238 x 400mm TAKES 200mm LARGE FLANGE HEADPLATE. LARGE FLANGE OMNI VESSELS FOE USE WITH STAINLESS STEEL HEADPLATE, 5L THRU 36L. HEAVY WALLED CONSTRUCTION FOR CELL CULTURE AND FERMENTATION APPLICATIONS HEAVY DUTY O-RING FLANGE CREATES POSITIVE SEAL FOR USE WITH STAINLESS STEEL HEADPLATE, O-RING AND LOCKING CLAMP. Qty: 1 ea. (1 per EA )

Description: Glass Ball Spinner Comp, 250mL Size: 250mL Material: Type 1 Class A Borosilicate Glass Flask Dimensions: 85mm OD x 140mm OAH, two 32mm sidearms offset at 55º, 70mm center neck Includes two 32mm blue PP screw caps & two 32mm blue PP pouring rings Impeller Assembly: one 70mm blue PP screw cap, 70mm Teflon cap seal, 70mm blue silicone sealing gasket, soft silicone flex tube, glass ball magnet tube, and magnet Specially Formed Bottom Indent Prevents Accumulation under impeller Glass ball houses a magnet for gentle agitation of Micro carrier Beads (1 per EA )

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses, and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and digital display. All Position Drives are for use with plastic roller bottles to prevent slipping of the light-weight bottles. Roller Shaft Construction: Non-transferring chemical-resistant rubber rollers with key-shape. Clearance between Decks for Bottle Placement: 134 mm. Construction Material: Aluminum, enamel finish. Usable Roller Length: 51 cm. Brushless motor with controller for smooth operation and no maintenance. Easy-to-remove roller bar assembly (tool provided). Digital LCD display. Locking speed control knob. All position drives. Accepts all Bellco Roller Bottles (glass or plastic* in 110mm or 120mm diameter). Battery backup provides 18 hour service (typical at 2 RPM). Battery backup includes both audible and visual indicators. Motion Alarm (1 per EA )

Bellco Control System, Flat Bottom. The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and 1965 Spinner Flasks. Sizes range from: --100 mL to 36 liters for 1965 spinners --100 to 3000 mL for 1967 spinner flasks Material: --316L Stainless Steel 1965 & 1967 Series Micro-Carrier Spinner Flask 8L 8L BCS Flat Bottom System 115v (1 per EA )

Bellco manufactures all precision pipettes from type 1 class a Borosilicate glass. All bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. Plain top promotes rapid even flow with a calibrated to tip -tempered tip; to deliver; blow out. (250 per CS )