Glassware

Valves Right Angle Extended Tip PTFE Plug HI-VAC PTFE Plug Size 2 Designed with a precision external thread for fine control. The accurately controlled valve seat and the extended tip on the PTFE plug allow semi-needle valve control for both liquids and gases. (1 per EA)

60mL B.O.D. Bottles With Glass Robotic Stopper Accessories 227723. 60mL B.O.D. Bottles. With Glass Robotic Stopper (36 per CS )

Micro Kit for Organicand Environmental Chemistry Complete kit Wheaton Kits provide apparatus for a wide range of organic chemistry experiments at a lower price than if components were purchased separately. (1 per EA)

Tubing Rod KG-33 Glass KIMAX Small Rod Tubing Approximate 8mm OD Approximate 0.075 pounds per foot. Cut only end finish 85 pieces per case. Corrugated packaging. Pounds per case 25. Lengths are 48 ±1/4.

Absorption Tube, Calcium Chloride U-form, L 125mm, Dia 15mm, Borosilicate glass (1 per EA )

Leighton culture tubes are useful for the study of pathogenic effects on viruses on cells as well as sponge matrix culture and nutritional studies. Use cover slips for preparing expectant tissue cultures with leighton culture tubes. Tube dimensions 16x150mm (36 per CS )

Type 1 Class A Borosilicate Glass for freeze drying or cryogenic storage. The neck has pre-drawn constriction to facilitate sealing. Specifications: Type 1 Class A Borosilicate Glass Flat Bottom Constriction Neck Neck OD : 7mm Bottom OD: 10mm Capacity: 1mL Length 80mm Case Quantity: 72 (72 per CS )

Volumetric Pipets, 7 mL (12 per PK )

The Bellco Digital Bench-top Roller Apparatus holds 10 glass or plastic roller bottles (110 to 120 mm diameter and up to 22.5 cm in length). The unit features a heavy-duty DC motor and solid-state electronics that operate at bottle speeds ranging from 0.3 to 10.0 rpm with the ability to select clockwise or counter clockwise direction. The digital display panel has a 0.55” LED for easy reading and the apparatus has a locking speed knob. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. Bellco’s unique hex-shaped shafts prevent roller slippage for positive drive. Use of this equipment is limited to conventional laboratory mixing of roller bottles. (1 per EA )

316l stainless steel sparger assembly with stainless steel frit for 7 liter bioreactor system. English threads Material: 316l SST with electropolish finish ra 32 or better Tubing specifications: .250" od x .152" id Overall length: 10 43/64" Inseration Length: 9 1/4" With SST Frit - 10µ Supply with SST Nut & O-ring (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 170" x 110" Flask size: 500ml (1 per EA )

Large flange air stone sparger for large flange vessels. Fits through stainless steel head plate fitting. These spargers fit through a 5/16" fitting. 316 l stainless steel Ra 32 finish or better Acrodisc filter assembly, 0.2 micron (1 per EA )

Trough Pneumatic, dia 20cm, height 10cm, Soda glass (1 per EA )

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units feature a solid state control with heavy-duty DC motor and analog tachometer. Non-modular production models feature rubber bumpers, handles and a slotted rear guard. (1 per EA )

316-l stainless steel ra32 or better finish 10 micron porosity stainless steel frit for low profile vertical side arm vessels. Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket Triple tube configuration With Vent, Fill/Sample And Sparge. (1 per EA )

Wide-Tip Volumetric Pipets, 20 mL (6 per PK )

Bellco Control System, Flat Bottom. The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and 1965 Spinner Flasks. Sizes range from: --100 mL to 36 liters for 1965 spinners --100 to 3000 mL for 1967 spinner flasks Material: --316L Stainless Steel 1965 & 1967 Series Micro-Carrier Spinner Flask 5L BCS Flat Bottom System 115v (1 per EA )

Watch Glass 9cm. Pack of 12 (12 per PK )

For 7l bioreactor systems - English threads Material: 316l SST with electropolish finish OD: 2 3/4" Requires two (2) ea per vessel (1 per EA )

Manufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 polypropylene blue screw caps 45mm and pouring rings, also 1 polypropylene blue cap 100mm for the center. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Center Neck Baffles: 0 Sidearms: 6 OD x OAH: 240 x 430mm (1 per EA )

The Bellco Digital Bench-top Roller Apparatus holds 10 glass or plastic roller bottles (110 to 120 mm diameter and up to 22.5 cm in length). The unit features a heavy-duty DC motor and solid-state electronics that operate at bottle speeds ranging from 0.3 to 10.0 rpm with the ability to select clockwise or counter clockwise direction. The digital display panel has a 0.55” LED for easy reading and the apparatus has a locking speed knob. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. Bellco’s unique hex-shaped shafts prevent roller slippage for positive drive. Use of this equipment is limited to conventional laboratory mixing of roller bottles. (1 per EA )

Watch Glass 7.5cm. Pack of 12 (12 per PK )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Extra long working area yet short overall length promotes convenient handling. Short neck allows easy entry and removal of cover slips. Also can fit bellco self-locking racks. Tube dimensions: 19x95 (36 per CS )