Glassware

KIMAX Glass BeadsBorosilicate glass beads are highly resistant to liquid and vapor attacks hot or cold. May be used for mixing beads boiling stones and packing for distillation columns. 5500 x 4mm diameter. (1 per EA )

Type 1 Class A Borosilicate Glass that are designed for maintaining anaerobic conditions. Useful for studies involving methane-producing bacteria, cell culture, drug discovery, and research and development. Specifications: Size: 50mL Dimensions: 46mm X 88mm Neck OD: 19.7-20.2mm 13.3-13.6mm Supply With: 20mm Septum Stopper & Aluminum Seal Case Quantity: 12 Accessories: 2048-11800 Septum Stopper 2048-11020 Aluminum Seal 2048-10020 Seal Crimper (12 per CS )

Graduated Pipette, USP BBR, AS, Typ 2.2:0.02mL, pk of 12 (12 per PK)

Manufactured from type 1 class a Borosilicate glass. Includes long skirted screw cap with nontoxic white rubber liner. Extra long working area yet short overall length for convenient handling. The short neck provides easy entry and removal of cover slips. (36 per CS )

3/4" septum port w/cap and stopper. 316 l stainless steel Ra 32 finish (1 per EA )

Ideal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Size: 8l Material: type 1 class a Borosilicate glass Dimensions of Water Jacketed: 300mm od x 440 oah Dimension of inner flask: 238mm OD x 420mm OAH. Dimensions: width including two hose barbs 396mm. 2 - #4 hose connectors. 100mm screw thread H.W. neck. 4 - 45mm screw thread vertical side arms. Graduations:1500mL to 8000mL every 500mL (1 per EA )

Thermowell assembly is manufactured from 316l stainless steel with 32ra finish or better. It can be used with rtd temperature sensor. Includes polypropylene screw cap and silicone gasket. There are also tubes for addition media and vent. Thermowell assemblies attach to the sidearms with a screw cap assembly. 3-PORT THERMOWELL ASSY - 45mm. FOR 1964 VERTICAL OHD VESSELS. WELDED - ELECTROPOLISH FINISH. ALL MATERIAL IS: 316L SST. CONSIST OF: 1 - SST 5/16"OD X .225"ID X 1.0" above x 15 31/32" insertion X 17 3/32" LONG 1.0" above x 15 31/32" insertion 1- SST VENT TUBE; .250"OD X .152" ID) SUPPLY WITH CAP ( A523-599) & A523-600 (LINER) (1 per EA )

Adapter Receiver Bend, socket 24/29, Cone 29/32 (1 per EA )

Stopper-Penny Head, borosilicate glass, Solid, Cone 14/23 (1 per EA )

Bellco manufactures all precision pipettes from type 1 class a Borosilicate glass. All bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. Plain top promotes rapid even flow with a calibrated to tip -tempered tip; to deliver; blow out. (250 per CS )

Pipette Serological class 'A' 1.0ml, Yellow (1 per EA )

Test Tube, Rimless 7ml 100 x 12mm, PK/48 (48 per PK )

Adapter Receiver Bend, socket 14/23, Cone 14/23 (1 per EA )

Solid penny head glass stoppers have an interchangeable ground joint. For use with ground jointed glassware such as flasks and separatory funnels. (1 per EA )

Bellco manufactures all precision pipettes from type 1 class a Borosilicate glass. All bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. Plain top promotes rapid even flow with a calibrated to tip -tempered tip; to deliver; blow out. (250 per CS )

Bellco Magnetic Stirrers are specifically designed for growing both mammalian and bacterial cultures where minimal heat transfer from the magnetic stirrer to the culture vessel is essential. They are ideal for tissue cultures grown in spinner flasks. Bellco incorporates low wattage DC motors to reduce stirrer heat up. Independent power and speed controls allow unit to maintain a speed setting when switched on and off. Powerful magnets rotate on ball bearing shafts for increased coupling and continuous maintenance free service. Polyurethane drive belts resist humidity and temperature. The 100V, 115V & 230V models feature a convenience outlet that allows daisy chaining of up to ten stirrers. Speed range: 30 - 1000 rpm +/- 5% (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Manufactured from Type1 Class B Borosilicate Glass. Large opening and sloping shoulders facilitate pouring and cleaning. Heavier walls prevent breakage of glass. Media storage bottles have white graduations and a marking area. They are supplied with rubber lined black phenolic screw cap. Specifications: Type 1 Class B Borosilicate Glass Sizes: 125ml (33)mm Cap OD x OAH: 55 x 120 Case Quantity: 12 (12 per CS )

Adapter Expansion, Socket size 40/38, Cone size 24/29 (1 per EA )

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Sealed internal impeller decreases risk of contamination. Specifications: Cap Size: 100mm Flask Size: 100mL Paddle Size: 9 1/2" x 6" (1 per EA )

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 3l Dimensions: 165 x 300mm Sidearm cap: 45mm (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. Features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type 1 Class A Borosilicate Glass Size: 5mL Dimensions: 20 x 23mm Case Quantity: 12 (12 per CS )

• Material: Type 1 Class A Borosilicate Glass • Dimensions: 65mm Width x 135mm Overall Height • Graduations: 20mL – 100mL, every 20mL • Working Volume: 80-100mL • Specially Formed Bottom Indent Prevents Accumulation Under Impeller • Glass Ball Houses a Magnet for Gentle Agitation of Microcarrier Beads • 5/16” OD x 1/4” ID Flex Tube Shaft • Two 32mm Side arms • One 70mm Screw Thread Center Neck (1 per EA )

Description: Adjustable Hanging Bar Spinner Flask Complete, 50ml Bellco Adjustable Hanging Bar Spinner Flasks were designed for the efficient growth of suspension cells at low speeds. This flask is manufactured of medium-walled borosilicate glass tubing with black phenolic screw caps. The hanging spinner is adjustable and useful over a wide range of stirring speeds. The 1967-style spinner includes a center screw cap with a black compression fitting for mounting the glass impeller shaft. Adjustable Hanging Bar Spinner Flask consists of: Flask, Impeller Assembly, Impeller Glass Shaft, and Cap Assembly. Flask Specifications [1967-10050]: Material: Type 1 Class A Borosilicate Glass Dimensions: 55mm OD x 110mm Overall Height, Two 18mm Sidearms angled 45° offset center One 51mm Screw Thread Center Neck Flask has flat bottom – no dimple Graduations: 10mL to 50mL, every 10mL – White Ink (Approx Volumes) Supply with: Two Rubber Lined Black Phenolic Caps Impeller Assembly Specifications [1969-30050]: Impeller Assembly consists of impeller magnet & magnet holder Impeller magnet: PTFE coated magnet, 34.9mm long x 9.5mm OD (approx.) Magnet Holder: White Teflon, 9.5mm long x 15.9mm OD Glass Shaft Specifications [1969-70100]: Material: Type 1 Class A Borosilicate Glass Dimensions: 7mm OD x 120mm long Cap Assembly Specifications [1967-90051]: Cap Assembly consists of screw cap and stopper Screw Cap: 54.0mm OD x 11.1mm H Stopper: Silicone 32.5mm OD x 26.2mm H (1 per EA )