Supports, Racks and Trays

Cast iron, zinc-plated support ring with boss-head clamp and thumbscrew. Distance from support to center of ring is 4-1/2" for all sizes. (1 per EA)

Steam autoclavable, polypropylene molded tray can be used for sterilizing, drying labware, and are ideal for storage of labware. (6 per PK )

Securely support and organize lab apparatuses with United Scientific's customizable lattice systems. Constructed of hard aluminum support rods with cast alloy footplates and hook connectors, these systems are as durable as they are practical. Assembly is easy and requires only a screwdriver. Contents: * 4 foot plates, 2-5/16” diameter * 4 set screws for foot plates * 12 anchoring screws for foot plates * 22 hook connectors with thumbscrews * 8 support rods, 2” long, 1/2” diameter * 2 support rods, 18” long, 1/2” diameter * 8 support rods, 24" long, 1/2" diameter (1 per EA)

Good quality clay pipe mounted on heavy gauge twisted galvanized steel wire. (1 per EA)

Cast iron ring with black enamel finish. Detachable zinc plated legs are interchangeable for use with various sizes of rings. Rings and legs are also available individually. (1 per EA)

Steel rod, zinc-plated extension support rings. Rod diameter 5/16", overall length 12" for all sizes. (1 per EA)

Steel rod, zinc-plated support ring with attached boss-head clamp and thumbscrew. Distance from support to center of ring is 4-1/2" for all sizes. (1 per EA)

Polypropylene rack is designed to hold six Nessler cylinders. Flat lower deck is white to provide a reflective surface. Chemical and corrosion resistant rack can be autoclaved at 121°C (250°F). (1 per EA)

This stand is designed for use with alcohol burners. Its base is constructed from 3/16" stainless steel rod, with a plated steel mesh top. The stand can be positioned to a height of either 4" or 5". (1 per EA)

Heavy cast iron bases with black enamel finish. Includes a removable, zinc-plated steel rod. (1 per EA)

Cast iron ring with black enamel finish. Detachable zinc plated legs are interchangeable for use with various sizes of rings. Rings and legs are also available individually. (1 per EA)

Steel rod, zinc-plated extension support rings. Rod diameter 7 mm (0.27”) and the straight rod portion of each is 7.25” (184 mm) long. Open support rings are ideal for use with funnels, boiling flasks, and separatory funnels. (1 per EA )

Steel rod, zinc-plated extension support rings. Rod diameter 5/16", overall length 12" for all sizes. (1 per EA)

Stamped steel bases with black enamel finish feature 2 tapped holes. Hole at center of the shorter side is for standard ring stand use. Hole at center of the longer side is for applications such as titrations, specific gravity determinations, etc. Includ (1 per EA)

Stamped steel bases, with black enamel finish. Includes a removable, zinc-plated steel rod. Bases and Rods are also available individually. (1 per EA)

Steel rod, zinc-plated extension support rings. Rod diameter 7 mm (0.27”) and the straight rod portion of each is 7.25” (184 mm) long. Open support rings are ideal for use with funnels, boiling flasks, and separatory funnels. (1 per EA )

Steel rod, zinc-plated extension support rings. Rod diameter 5/16", overall length 12" for all sizes. (1 per EA)

Steel rod, zinc-plated support ring with attached boss-head clamp and thumbscrew. Distance from support to center of ring is 4-1/2" for all sizes. (1 per EA)

Reversible racks can be used for 0.5ml or 1.5ml capacity tubes. Both sides of the rack can hold up to 108 tubes, and feature alpha-numeric grid for inventory management. Included transparent lids can be used to cover either side to provide a clear view while protecting stored tubes. (5 per PK )

Heavy porcelain base measures 6" x 6" and includes a glazed finish to prevent chemical seepage. A hole for the removable support rod is conveniently located in the center of the base, and rubber feet are affixed to the base bottom to prevent sliding and/or damage to the work surface. The included aluminum support rod measures 20" long with a 3/8" diameter. (1 per EA)

Cast iron base with gray enamel finish. Base measures 6" x 11" x 3mm thick. A welded plate on the mounting hole gives the support rod 10mm of screw support, which is three times thicker than traditional stands. Includes a removable, zinc-plated steel support rod, measuring 36" long and 1/2" in diameter. An 80mm torque rod helps secure the support rod to the base plate. (1 per EA )

Heavy stamped steel bases with black enamel finish feature an added steel plate on the back, which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base. Includes a re (1 per EA)

Heavy stamped steel bases with black enamel finish feature an added steel plate on the back, which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base. Includes a re (1 per EA)