Supports, Racks and Trays

Stamped steel bases, with black enamel finish. Includes a removable, zinc-plated steel rod. Bases and Rods are also available individually. (1 per EA)

Organize various sized tubes using the Rotator Workstation. Racks can be joined together using the unique rotate and lock design. Add as many racks as you need. Racks can withstand temperatures of -80°C to +121°C and are autoclavable. Built-in ridges enab (4 per PK )

Stamped steel bases, with black enamel finish. Includes a removable, zinc-plated steel rod. Bases and Rods are also available individually. (1 per EA)

Cast iron base with gray enamel finish. Base measures 4" x 6" x 3mm thick. A welded plate on the mounting hole gives the support rod 10mm of screw support, which is three times thicker than traditional stands. Includes a removable, zinc-plated steel support rod, measuring 18" long and 5/16" in diameter. An 80mm torque rod helps secure the support rod to the base plate. (1 per EA )

Designed for organizing pipettes or other lab instruments, our pipette tray is designed to fit large drawers, refrigerators and bench tops. Tray features 4 deep columns (approx.. ¾” deep) and is recommended for 1 to 10ml pipettes. (1 per EA )

Heavy porcelain base measures 7" x 13" and includes a glazed finish to prevent chemical seepage. A hole for the removable support rod is conveniently located in the center of the base, and rubber feet are affixed to the base bottom to prevent sliding and/or damage to the work surface. The included aluminum support rod measures 24" long with a 1/2" diameter. (1 per EA)

Stamped steel bases, with black enamel finish. Includes a removable, zinc-plated steel rod. Bases and Rods are also available individually. (1 per EA)

Steam autoclavable, polypropylene molded tray has a built in handle for easy carrying of reagents or laboratory ware using one hand. (6 per PK )

United Scientific® EcoLift™ Lab Jack, 4X4", Yellow (1 per EA )

Sturdy, economical and convenient racks for samples stored in vials. Autoclavable at 120° Celsius for 20 minutes. Can be stacked when not filled, for easy storage. Each well features a drainage hole at the bottom. (5 per PK )

Molded polystyrene support stands are ideal for use in applications that require non-corrosive worksurfaces. Heavy, weighted base provides stability similar to metal versions. The removable steel rod is coated with polypropylene to make it non-corrosive. (1 per EA)

Extra long spring (21cm when compressed) allows you to magnify your wave demonstrations to illustrate traveling waves and wave patterns. Included stand prevents tangling or damage to super spring during storage. Includes activity guide. (1 per EA )

Removable concentric rings provide an adjustable worksurface for various applications. Cast iron ring with black enamel finish. Detachable zinc plated legs are interchangeable for use with various sizes of rings. Rings and legs are also available individu (1 per EA)

Rugged, autoclavable centrifuge tube boxes can be used at temperatures of -90°C to 121°C. Racks hold 36 each 15ml tubes, or 16 each 50ml tubes, and feature a clear lid for easy identification of contents. (4 per PK )

Stamped steel bases with black enamel finish feature 2 tapped holes. Hole at center of the shorter side is for standard ring stand use. Hole at center of the longer side is for applications such as titrations, specific gravity determinations, etc. Includ (1 per EA)

These rugged autoclavable storage boxes are molded in polycarbonate, and can be used at temperatures of -150°C to 121°C. Designed to hold 100 each 0.5ml microcentrifuge tubes, or 64 each 1.5ml tubes. The numbered grid on transparent lid is keyed in one position to prevent misalignment. Lid accepts writing with a marker. (4 per PK )

Securely support and organize lab apparatuses with United Scientific's customizable lattice systems. Constructed of hard aluminum support rods with cast alloy footplates and hook connectors, these systems are as durable as they are practical. Assembly is easy and requires only a screwdriver. Contents: * 6 foot plates, 2-5/16” diameter * 6 set screws for foot plates * 18 anchoring screws for foot plates * 42 hook connectors with thumbscrews * 10 support rods, 2” long, 1/2” diameter * 3 support rods, 18” long, 1/2” diameter * 2 support rods, 36” long, 1/2” diameter * 7 support rods, 48” long, 1/2” diameter (1 per EA)

This stand is designed for use with alcohol burners. The base is constructed from zinc-plated steel wire. Its heavy wire gauze top features a ceramic center. The overall height is 5", ideal for burners of all sizes. (1 per EA)

Molded polystyrene support stands are ideal for use in applications that require non-corrosive worksurfaces. Heavy, weighted base provides stability similar to metal versions. The removable steel rod is coated with polypropylene to make it non-corrosive. (1 per EA)

Large polypropylene molded laboratory tray is steam autoclavable and can be used for sterilizing and drying labware. The 5" depth makes this tray ideal for storage of labware. (6 per PK )

Cast iron, zinc-plated support ring with boss-head clamp and thumbscrew. Distance from support to center of ring is 4-1/2" for all sizes. (1 per EA)

Heavy stamped steel bases with black enamel finish feature an added steel plate on the back, which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base. Includes a re (1 per EA)

Securely support and organize lab apparatuses with United Scientific's customizable lattice systems. Constructed of hard aluminum support rods with cast alloy footplates and hook connectors, these systems are as durable as they are practical. Assembly is easy and requires only a screwdriver. Contents: * 8 foot plates, 2-5/16” diameter * 8 set screws for foot plates * 24 anchoring screws for foot plates * 49 hook connectors with thumbscrews * 6 support rods, 2” long, 1/2” diameter * 6 support rods, 12” long, 1/2” diameter * 2 support rods, 24” long, 1/2” diameter * 7 support rods, 48” long, 1/2” diameter * 5 support rods, 72” long, 1/2” diameter (1 per EA)

Cast iron, zinc-plated support ring with boss-head clamp and thumbscrew. Distance from support to center of ring is 4-1/2" for all sizes. (1 per EA)