General

Zone-Free™, 384 Well, CS/50 (50 per CS)

Tube Rack, fraction collector type, 80 x 1.5mL/2mL, green, pack of 5 (5 per PK )

BrightMax is a white, light-reflecting, vinyl film that can be applied to either the top or bottom of the white plate. The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. Maximizes intensity and signal-to-noise ratios in luminescence assays. May be used as a backing matrix for microscopy of punchout samples for filter plates (e.g. ELISPOT assays). Features a single split liner for easy application. (50 per PK)

ThermalSeal RTS provides an extremely strong seal to minimize evaporation.. Features a pressure-activated, non-tacky, silicone adhesive. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free. Chemically resistant to DMSO, acetonitrile, and methanol. Ideal for use with flat-top, raised-rim and non-skirted PCR plates. High optical clarity and low auto-fluorescence. (1 per EA)

Sterile. For color-coding and plate identification, link below to SealPlate ColorTab films. SealPlate minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells). Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Can be used as a temporary economical seal while awaiting further processing. Features two end-tabs with perforations. (100 per PK)

Excellent chemical resistance (e.g. DMSO). Universal fit for use with all plate types (e.g. flat-top and raised-rim). The smaller dimensions and rounded corners result in no plate overhang for robotics applications. 2.0mil aluminum foil minimizes shredding during removal; ideal for cold storage. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surfaces. Features a single end-tab with perforations for ease of handling, application and removal. (100 per PK)

Minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells). Rigid polyester film features good clarity and easy handling. Can be used as a temporary economical seal while awaiting further processing Features two end-tabs with perforations. (100 per PK)

STAINLESS STEEL SPATULA, 8" (BOTH ENDS FLAT) (10 per PK )

Sterile refill roll. Ideal for use under the hood; the SealMate dispenser minimizes film contamination. Each sheet is separated by an adhesive-free, perforated, color-coded red band. Designed to facilitate air and CO2 exchange. Pore size from 10µm to 50µm. Moisture vapor transmission rate = 4,200g/m²/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. (2 per RL)

For sample identification and plate labeling. Each end-tab features a colored dot and white wring area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Features two end-tabs with perforations. Non-sterile. (100 per PK)

For sample identification and plate labeling. Each end-tab features a colored dot and white wring area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Features two end-tabs with perforations. Non-sterile. (100 per PK)

ValueSeal features smaller dimensions and a single non-perforated end-tab to provide a more cost-effective alternative to protect samples from evaporation, external contamination, dust and particulates. Rigid polyester film features good clarity and easy handling. Can be used as a temporary seal while awaiting further processing. (100 per PK)

ThermalSeal MiniStrips sealing films are identical to ThermalSeal sealing films, but designed for sealing only one or two 8-well rows at a time on PCR plates or strip tubes. They are now supplied in convenient sheets of four. Each sealing film strip is 19.0 x 97.3 mm, including two removable positioning tabs. (200 per PK)

The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated ?lm. The dispenser facilitates the quick and easy dispensing of ?lm from a roll allowing microplates to be sealed three times faster than using sheeted ?lms, while protecting unused seals from contamination. Cost-e?ective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes ?lm contamination. (1 per EA)

Instruction for K-1593 (1 per EA )

AeraSeal™ SealMate™ Starter Kit, SealMate Dispenser + 2 Rolls of Sterile AeraSeal, 50 Sheets/Roll (1 per EA)

For sample identification and plate labeling. Each end-tab features a colored dot and white wring area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Features two end-tabs with perforations. Non-sterile. (100 per PK)

For pierceablity with single-channel pipet tips, probles and needles. Sterile. (100 per PK)

Laboratory Notebook, 200-pages, Grid, Blue (12 per CS )

Spatula, Teflon Coated, both sides flat, 15cm (1 per EA )

Stir Bar Octagonal, PTFE 0.3125 x 2.5" (12 per CS)

Label Sheets, Cryo, 67x5mm, for Microplates, 20 Sheets, 99 Labels per Sheet, White (1040 per PK)

AeraSeal™ SealMate™ Starter Kit, SealMate Dispenser + 2 Rolls of Non-Sterile AeraSeal, 50 Sheets/Roll (1 per EA)

Four Slot Drawer Organizer (1 per EA )