General

Vactrap™ 2 Tubing Extension 10 feet (10'), with 0.2 um PTFE Inline Vent Filter, 1/EA (1 per EA )

Vactrap™ 2 Tubing Extension 16 feet (16'), with 0.2 um PTFE Inline Vent Filter, 1/EA (1 per EA )

Stirrer / spatula is molded of Nylon®. Handy stirrer or spatula has wide thin blade 3 1/2” long, 1 3/4” wide. Overall length is 10”. (24 per CS)

Measuring Scoop, PP, 5mL, pack of 12 (12 per PK)

Tubing Connector Kit 55 Piece (1 per EA)

General, Slide (LVP) (1 per EA )

ThermalSeal RTS provides an extremely strong seal to minimize evaporation.. Features a pressure-activated, non-tacky, silicone adhesive. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free. Chemically resistant to DMSO, acetonitrile, and methanol. Ideal for use with flat-top, raised-rim and non-skirted PCR plates. High optical clarity and low auto-fluorescence. (100 per PK)

Measuring Scoop, PP, 25mL, pack of 12 (12 per PK)

Tray White, HDPE 17.25 x 14.375 x2.25" (1 per EA)

Jack Laboratory, plate size 20x20cm. (1 per EA )

Certified DNase- & RNase- free. Large cut is designed for greater coverage; results in a more complete seal around the edges of the plate which can reduce evaporation rates. Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering. 2mil clear polyester film will not tear upon removal. An extra strong, thick adhesive minimizes evaporation and well-to-well contamination. Removes easily and cleanly from plate surfaces. Features two removable end-tabs with perforations for ease of handling, application and removall (100 per PK)

AlumaSeal II is a soft non-permeable aluminum foil with a strong, medical-grade acrylic adhesive. Easy-to-pierce for direct sample recovery. Has less tendency to roll back on itself when removing the backing paper. Certified DNase- & RNase- free. Excellent chemical resistance (e.g. DMSO). Easily pierceable with single or multichannel pipettors and robotic probes. 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well. (100 per PK)

Solvent Resistance: Moderate, Temp. Range °C: -80 to 110, Plate Type: PP, Application: PCR, good liquid barrier, low temp short term compound storage, can be re-sealed (5 per PK)

Roll Seal. AlumaSeal provides a secure seal for well plates to minimize evaporation, reduce cross-contamination and prevent spillage. Certified DNase- & RNase- free. Ideal for use with 384-well and deep-well plates or select AlumaSeal® 96™ for smaller cut for raised-rim and non-skirted PCR plates. Features one end-tab with no perforation. Pierceable with a pipet tip or robotic probe for direct sample recovery. Large cut allows for easier positioning of the foil to the plate via edge of plate alignment vs. centering. A complimentary sealing paddle is included in each AlumaSeal® 96™ box. Available in roll format for automation. (1 per EA)

Polypropylene Y-Type Barbed Tubing Connectors (Wye-Shaped), Three 1/4 Inch Barbs, Autoclavable, 100/PK (100 per PK )

LabJaws offers the largest selection of Lab-Frame Kits, Lab-Lifts, Rods, Support Stands & Connectors in the industry to safely hold labware. Whether you need a standard lab-frame or need to create a unique set-up, we have options to fit any space or application. Dependable connectors, secure rods, and clamps to meet your requirements. Five unique holders available in a variety of sizes and materials to accommodate different rods up to 24 mm in dia. (1 per EA)

Sterile. AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films. With a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the sealing film as it lays on the plate to avoid curling. Dimensions are 82.6 by 132.6 mm, including the single 9.5 mm end tab. AlumaSeal CS sealing films are certified DNase-, RNase-, and nucleic-acid-free. Specially formulated for cold storage to -80 °C. Excellent barrier properties to retard evaporation. Easily pierceable with pipet tips or robotic probes for sample recovery. (50 per PK)

96 Well ELISA Plate, Undetachable, High Binding, Black, Non-sterile, 5/pk, 50/cs (50 per CS )

Label Roll, Cryo, Direct Thermal, 27x13mm, for Cryogenic Vials, Blue (3 per RL)

ThermalSeal 2 and ThermalSeal Advanced feature a soft, extra thick, conformable adhesive that forms a very strong seal around raised wells to minimize evaporation and cross-contamination. Certified DNase- & RNase- free. Ideal for use with flat-top, semi-skirted and full-skirted PCR plates. Compatible with hard-shell dual component (e.g. polycarbonate/polypropylene) PCR plates. Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering. (100 per PK)

Dynalon’s new versatile modular liquid handling series fits all your needs. Whether sampling from drums or rail cars, stirring vats or dipping chemicals from a bath... we have the configuration to fill your requirements. Components are available piecemeal, as intuitive kits or buy the entire mega kit to cover all your bases. Interchangeable threaded components make using this product line quick, fun and easy! (1 per EA)

Self-adhesive sealing film, gas-permeable, sterile,bag of 50 (50 per PK)

Heat Seal Pierceabale, Foil 610m x 77.5mm (1 per RL)

Non-Sterile. AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films. With a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the sealing film as it lays on the plate to avoid curling. Dimensions are 82.6 by 132.6 mm, including the single 9.5 mm end tab. AlumaSeal CS sealing films are certified DNase-, RNase-, and nucleic-acid-free. Specially formulated for cold storage to -80 °C. Excellent barrier properties to retard evaporation. Easily pierceable with pipet tips or robotic probes for sample recovery. (100 per PK)