General

Extra long spring (21cm when compressed) allows you to magnify your wave demonstrations to illustrate traveling waves and wave patterns. Included stand prevents tangling or damage to super spring during storage. Includes activity guide. (1 per EA )

TrippNT's Clear Medium Apparel Dispenser keeps your apparel safe and visible. It has a clear hinged lid, highly visible label and center slot for easy dispensing. This product has keyholes for mounting with provided hardware; it weighs 3 lb (1 per EA )

Polyethylene Barbed Union Tube Fittings, Reducing Connector, 1/2 Inch x 1/4 Inch, 100/PK (100 per PK )

Stirring Rod, PTFE w Steel Core 10" (6 per CS)

Stir Bar Octagonal, PTFE 0.3125 x 1.5" (12 per CS)

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 11/16" (17.5mm) Tube size: 16mm Spacing: 4x6 holds 24 tubes Dimensions: 4 3/4" x 3 1/4" x 3" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

Blue ASTM neoprene stoppers with 2 hole (5 mm dia): ASTM Size: #8 Bottom 33mm Top 41mm Length 25mm Made from long lasting neoprene rubber, oil resistant, Use up to temps of 250°F / 120°C Pack of 10 (10 per PK )

Spirit Lamp - Stainless steel Sheet, cap. 80ml (1 per EA )

Solva PVC 2.79mm Pur/Wht Pump Tubes (12 per PK)

Cork Stopper - Bark, size no. 1, bottom 8mm, top 11mm, length 16mm, pk of 10 (10 per PK )

Vinyl laboratory tubing conforms to critical industry standards, having been approved by FDA, USDA, USP Class VI, NSF, and UL. Vinyl laboratory tubing's purity, performance and reliability make it the material of choice when handling liquids, gases and semi-liquids. (50 per CS)

Label Sheets, Cryo, 67x25mm, for Racks and Boxes, Assorted Colors (150 labels in blue, green, violet, red and yellow) (3900 per PK)

EISCO TEST Tube STAND 6 HOLES OF 22 DIA (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Non-corressive borosilicate glass to prevent etching. Accepts Bellco stainless steel closures and KAPUT closures. Specifications: Borosilicate Glass Round Bottom Sizes: 13x100mm Volume: 8.7ml’ Case Quantity: 288 (288 per CS )

Blue ASTM neoprene stoppers with 2 hole (5 mm dia): ASTM Size: #6 Bottom 26mm Top 32mm Length 25mm Made from long lasting neoprene rubber, oil resistant, Use up to temps of 250°F / 120°C Pack of 10 (10 per PK )

Labeling Tape, 1/2" x 60yd per Roll, 6 Rolls/Case, Copper (6 per CS)

Heavy plastic spill containment trays are fabricated with 3/16” thick polypropylene or 1/4”high density polyethylene and feature an all welded construction. Dimensions listed are inner (I.D.). (1 per EA)

Removable concentric rings provide an adjustable worksurface for various applications. Cast iron ring with black enamel finish. Detachable zinc plated legs are interchangeable for use with various sizes of rings. Rings and legs are also available individu (1 per EA)

The LaboPlast® disposable scoop made of PS is manufactured under class 7 (ISO) cleanroom conditions, assembled and individually packaged to meet the highest cleanliness requirements. The scoop with transparent lid remains protected even after unpacking. (10 per PK )

Tubing Connector Straight, PP 12-14mm (100 per CS)

Scoop LaboPlast Bio, single-use, Bio-PE, 150 ml (10 per PK )

Burkle MultiDispo Disposable zone samplers for taking samples from multiple layers of the sample material. (25mm diameter) (20 per PK)

Labeling Tape, 1" x 500" per Roll, 3 Rolls/Box, Lavender (12 per CS)

Certified DNase- & RNase- free. Standard cut is compatible with all plate types; when using raised-rim plates, the standard cut must be used so the film does not extend up the side walls of the plate and cause excessive evaporation. Standard cut features chamfered corners; film does not overhang plate for robotics applications and tight storage conditions. 2mil clear polyester film will not tear upon removal. An extra strong, thick adhesive minimizes evaporation and well-to-well contamination. Removes easily and cleanly from plate surfaces. Features two removable end-tabs with perforations for ease of handling, application and removal. (100 per PK)