Filtration

MFS/Advantec Equivalent: 13CP045AS (100 per PK )

Unlike traditional polymeric cast film membranes, H&V Trupor® utilizes nanoscale fibers in a composite design to achieve precisely regulated porosities. This innovative design yields best in class performance. No adhesives are utilized which significantly reduce trace extractables making it an ideal matrix for analytical separation (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents. MFS/Advantec Equivalent: GC-50 35MM (100 per PK )

Ahlstrom Equivalent: 1610-0700 MFS/Advantec Equivalent: GC5070MM (100 per PK )

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth and uniform. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter. (100 per PK )

EZlabpure™ Polyethersulfone (PES) Syringe Filters, 0.45 µm Membrane for Clarification or Prefiltration, 13 mm,Sterile,100/PK (100 per PK )

Filter, Disk, NC, 0.1µ, 25mm, 100/Pk (100 per PK )

Filtration Microfiltration Assembly 90 mm with Fritted Glass Support Ultra-Ware (3) Fritted Glass Support Base 90 mm The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. (1 per EA)

Cytiva/Whatman Equivalent: 1827-150 Ahlstrom Equivalent: 1690-1500 MFS/Advantec Equivalent: GC50150MM Sartorius: FT-3-01147-150 (100 per PK )

EZlabpure™ Hydrophilic PVDF Syringe Filters, 0.45 µm Membrane for Clarification or Prefiltration, 25 mm, Sterile,100/PK (100 per PK )

Filter Paper, 12.5 cm, #610, 100/box (1 per EA)

EZlabpure™ Hydrophilic PTFE Syringe Filters, 0.22 µm Pore Size Membrane for Prefiltration and Sample Prep, 13 mm,Non-Sterile,100/PK (100 per PK )

Disc Speed Pack NC 0,45 µ Black Gridded Sterile 47 mm 600Pk (600 per CS )

Cytiva/Whatman Equivalent: 1851-865 Pall Equivalent: 7204 (100 per PK )

EZlabpure™ Hydrophilic PVDF Syringe Filters, 0.45 µm Membrane for Clarification or Prefiltration, 13 mm,Sterile,100/PK (100 per PK )

Filter, Disk, NC, 1.2µ, 25mm, 100/Pk (100 per PK )

Filter, Disk, NC, 1.2µ, 90mm, 25/Pk (25 per PK )

Filter, Disk, PTFE,Lam, 0.45µ, 47mm, 100/Pk (100 per PK )

Ahlstrom Equivalent: 1510-1500 MFS/Advantec Equivalent: GF75150MM Sartorius: FT-3-1105-150 Environmental Express (CP) Equivalent: FG75150MM (100 per PK )

Syringe Filter, MCE Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped (50 per PK)

Syringe Filter, PES Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

Filter, Disk, NC, 0.45µ, Grd,47mm, 100/Pk (100 per PK )

Filter, Disk, PTFE,Lam, 0.45µ, 20X20cm, 5/Pk (5 per PK )

MFS/Advantec Equivalent: 25CS020AS (100 per PK )