Filtration

Filter, Disk, N66, 5.0µ, 142mm, 25/Pk (25 per PK )

Filter, Disk, N66, 5.0µ, 293mm, 25/Pk (25 per PK )

Filter, Disk, N66, 0.8µ, Sp, 37mm, 100/Pk (100 per PK )

Filter, Roll, N66, 1.2µ, Sp,30cm X 3M (1 per EA )

Filter, Roll, N66, 5.0µ, Sp,30cm X 3M (1 per EA )

Filter, Roll, N66, 0.22µ, Sp,30cm X 3M (1 per EA )

EZFlow® Non-Sterile High Particulate Syringe Filter, 0.45µm PES Glass Fiber for Prefilteration, 25mm, 100/PK (100 per PK )

Cytiva/Whatman Equivalent: 1827-110 Ahlstrom Equivalent: 1690-1100 MFS/Advantec Equivalent: GC50110MM Sartorius: FT-3-01147-110 (100 per PK )

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )

Cytiva/Whatman Equivalent: 1827-035 MFS/Advantec Equivalent: GC5035MM (100 per PK )

Environmental Express (CP) Equivalent: FQ037MM (100 per PK )

EZFlow® Non-Sterile High Particulate Syringe Filter, 0.45µm Hydrophilic PVDF w/ Glass Fiber Prefilter, 25mm, 100/PK (100 per PK )

Syringe Filter, SFCA Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents, MFS/Advantec Equivalent: GC-50 110MM (100 per PK )

Bulk packed, non-sterile, in PVDF, PES, PTFE and Nylon membranes Color coded syringe filters are printed with membrane material and pore size opposite the luer-lock Female luer-lock inlet and male luer slip outlet Filters are molded into the polypropylene housings, providing a reliable seal without the use of adhesives (100 per CS)

EZlabpure™ Glass Fiber (GF) Syringe Filters, 0.22 µm Pore Size Membrane for Prefiltration and Sample Prep, 13 mm, Non-Sterile,100/PK (100 per 00 )

Cytiva/Whatman Equivalent: 1821-025 Pall Equivalent: 66198 Millipore Equivalent: APFB 025 00 Ahlstrom Equivalent: 1210-0250 MFS/Advantec Equivalent: GB14025MM Sartorius: FT-3-1102-025 (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents. MFS/Advantec Equivalent: GC-50 37MM (100 per PK )

Cytiva/Whatman Equivalent: 1827-125 Ahlstrom Equivalent: 1690-1250 MFS/Advantec Equivalent: GC50125MM Sartorius: FT-3-01147-125 (100 per PK )

Syringe Filter, CA Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

Syringe Filter, CA Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (50 per PK)

EZlabpure™ Glass Fiber(GF) for Prefiltration Polyethersulfone (PES) High Particulate Syringe Filter, 0.22 µm, 25 mm,Non-Sterile, 100/PK (100 per PK )

EZFlow® Glass Fiber Membrane Filters, 1.0um, 90mm Diameter Disc Prefilters, 100PK (100 per PK )

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )