Filtration

Bulk packed, non-sterile, in PVDF, PES, PTFE and Nylon membranes Color coded syringe filters are printed with membrane material and pore size opposite the luer-lock Female luer-lock inlet and male luer slip outlet Filters are molded into the polypropylene housings, providing a reliable seal without the use of adhesives (100 per CS)

Syringe Filter, MCE Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

25mm Syringe Filter, Polyethersulfone, 0.2µm, 1000/cs. Fast filtration flow. Low protein binding. Extensive drug compatibility for critical applications. Reduced chemical compatibility. Suitable for biological and pharmaceutical solutions. JG Finneran 25mm syringe filters are made using polypropylene medical-grade housings with Luer-Lock and Luer-Slip fittings in compliance with ISO 594-1. Each filter is sealed, using an external ring insert, to maintain the membrane integrity and best performance. Filters are color-coded for easy identification. The Certified Filters are supplied with a Certificate of Quality, batch-to-batch, to guarantee product performance and quality. The filters are visually inspected following quality specifications. Each batch of filters is tested for external dimensions, bubble point, filter integrity, water flow rate, UV extractable, and compliance with all technical procedures, manufacturing specifications, and quality controls for release. Tests are performed by an independent laboratory. (1000 per CS )

EZlabpure™ Polyethersulfone (PES) Syringe Filters, 0.45 µm Pore Size Membrane for Prefiltration and Sample Prep, 25 mm,Non-Sterile, 100/PK (100 per PK )

EZlabpure™ Hydrophobic PTFE Syringe Filters, 0.22 µm Pore Size Membrane for Prefiltration and Sample Prep, 25 mm,Non-Sterile, 100/PK (100 per PK )

EZlabpure™ Hydrophilic PVDF Syringe Filters, 0.22 µm Pore Size Membrane for Prefiltration and Sample Prep, 25 mm,Non-Sterile, 100/PK (100 per PK )

EZlabpure™ Hydrophilic PVDF Syringe Filters, 0.22 µm Sterilizing Membrane, 33 mm,Sterile, 100/PK (100 per PK )

Bottle Top Filters ZapCap Plus (12 per CS )

GVS centrifuge filters, Centrex™, has various type of membranes and make able the end users to do a larger sample preparation, with a considerable reduction of contamination risk. Thanks to the GVS knowledge in filtratio (50 per PK )

3-Branch Stainless Steel Manifold, Suitable For GVS Analytical Funnel And Monitors 56mm (1 per EA )

White/Black Grid Sterile 0.2µ 47mm Analytical Funnel, 50/Pk, BagGEd (50 per PK )

Filter, Dsk,Ag,0.45,25mm 50/Pk (50 per PK )

Filter, Disk, NC, 0.45µ, Grd,St,47mm,S2, 100/Pk (100 per PK )

Filter, Disk, PTFE,Lam, 1.0µ, 47mm, 100/Pk (100 per PK )

Filter, Disk, GE, PCTE, 0.2µ, 47mm, 100/Pk (100 per PK )

Filter, Disk, PES, 0.65µ, 293mm, 25/Pk (25 per PK )

Filter, Disk, RC, 0.22µ, 25mm, 100/Pk (100 per PK )

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth and uniform. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter. (100 per PK )

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth and uniform. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter. (100 per PK )

Cytiva/Whatman Equivalent: 6874-2504 (100 per PK )

Cytiva/Whatman Equivalent: 1851-090 Pall Equivalent: 7203 MFS/Advantec Equivalent: QR10090MM Sartorius: Q3400--90------G (100 per PK )

Spare Clamp For Filteration Assembly (1 per EA )

Syringe Filter, MCE Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

Syringe Filter, CA/GF Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)