Filtration

EZlabpure™ Nylon Syringe Filters, 0.22 µm Pore Size Membrane for Prefiltration and Sample Prep, 13 mm,Non-Sterile,100/PK (100 per PK )

Sheet PVDF Hyphbic 0.22µ 70 X 84mm 10/Pk (10 per PK )

White Nitrocellulose Hydrophilic Flat Roll Membrane, Pore Size 0.8µ, Width13", Length 125Ft (250 per CS )

Cytiva/Whatman Equivalent: 1823-042 Millipore Equivalent: APFD 042 00 Ahlstrom Equivalent: 1410-0425 (100 per PK )

Cytiva/Whatman Equivalent: 1823-037 Pall Equivalent: 66222 Millipore Equivalent: APFD 037 00 (100 per PK )

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth and uniform. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter. (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents. MFS/Advantec Equivalent: GC-50 24MM (100 per PK )

Bulk packed, non-sterile, in PVDF, PES, PTFE and Nylon membranes Color coded syringe filters are printed with membrane material and pore size opposite the luer-lock Female luer-lock inlet and male luer slip outlet Filters are molded into the polypropylene housings, providing a reliable seal without the use of adhesives (100 per CS)

Syringe Filter, CA Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

Syringe Filter, CA Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped (50 per PK)

Syringe Filter, PTFE Hydrophilic Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

EZlabpure™ Hydrophilic PTFE Syringe Filters, 0.45 µm Pore Size Membrane for Prefiltration and Sample Prep, 33 mm, Non-Sterile,100/PK (100 per PK )

Centrifugal Filters, Centrex, 5ml, 0.45µ, Cn, Sterile, 50/Pk (50 per PK )

Filter, Disk, PCTE, 0.03µ, 47mm, 100/Pk (100 per PK )

Filter, Disk, GE,PCTE,12.0,25mm, 100/Pk (100 per PK )

Filter, Disk, PVDF,0,22,90mm, 25/Pk, Phillic (25 per PK )

Disc Speed Pack NC 0,45 µ Wht Gridded Sterile 47 mm 600Pk (600 per CS )

Filtration Microfiltration Assembly 47 mm with Bottle and Stainless Steel Support Ultra-Ware 47 mm Filtration Assembly with Bottle and Stainless Steel Support. Support base has a removable stainless steel support screen. (1 per EA)

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents. MFS/Advantec Equivalent: GC-50 425MM (100 per PK )

Cytiva/Whatman Equivalent: 6870-2502 (100 per PK )

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )

Bulk packed, non-sterile, in PVDF, PES, PTFE and Nylon membranes Color coded syringe filters are printed with membrane material and pore size opposite the luer-lock Female luer-lock inlet and male luer slip outlet Filters are molded into the polypropylene housings, providing a reliable seal without the use of adhesives (100 per CS)

Syringe Filter, PTFE Hydrophilic Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)