Containers

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. WITHOUT BAFFLES Specifications: Type 1 Class A Borosilicate Glass Sizes: 2800ml OD X OAH (MM):210 X 225 Case Quantity: 1 (1 per EA )

The Bellco Orbital Shaker is a compact, heavy-duty variable speed shaker. It is used for the agitation of electrophoretic gels and filter assay media for staining, destaining and assay development. The Shaker accommodates a variety of vessels. It is continuously adjustable from 30 to 350 RPM. This Bellco design incorporates an orbital platform that accepts a variety of optional trays. A variety of tray models are available, including three equipped with flask clamps for common sizes of flasks. Peg and Grommet style trays make changing convenient. (1 per EA )

Ideal for growing, storing and mixing or aerobic and anaerobic cultures. The 3 bottom baffles increase culture oxygenation. Includes 25mm Bellco stainless steel closure (2005 series) Specifications: Type 1 Class A Borosilicate Glass Sizes: 300ml Includes: Bellco Stainless Steel Closure (2005 Series) Sidearm Dimensions: 14x130mm Case Quantity: 4 (4 per CS )

Manufactured from type 1 class a Borosilicate glass. For spinner flasks 15l to 36l Dimensions: 9mm x 500mm long (1 per EA )

Seam welded with electropolished finish 3-port with siphon, fill and vent tubes Includes 45mm pp cap and silicone gasket 500ml with 100mm cap Longest tube: 1.5" (1 per EA )

Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 6-8l Paddle dimensions: 3"x 7 3/4" (1 per EA )

3000mL Bell-Flo™ Internal Overhead Bearing Assembly Internal Overhead Bearing Assembly Specifications: Consists of screw cap, cap seal, sealing ring, compression washer, ball bearing spacer, ball bearing, bearing thimble, magnet, o-ring, magnet holder, shaft, & paddle 100mm PP Blue Screw Cap: 82.6mm OD x 22.4mm tall PTFE Cap Seal: 95.3mm OD x 25mm long Red Silicone Sealing Ring: 86mm OD x 76.2mm ID x 6.1mm thick White Silicone Compression Washer: 27.0mm OD x 12.7mm ID x 1.6mm thick PTFE Ball Bearing Spacer: 19.1mm OD x 12.7mm ID x 22.4mm deep PBT & SST Ball Bearing: 19.1mm OD x 6.4mm ID x 7.1mm deep PTFE Bearing Thimble: 31.8mm OD x 19.1mm ID x 38.1mm long PTFE Magnet: 12.7mm OD x 76.2mm long Silicone O-ring: 7.9mm OD x 4.8mm ID PTFE Magnet Holder: 19.1mm OD x 177.8mm long 316L SST Shaft: 6.4mm OD x 190.5mm long PTFE Paddle: 82.6mm wide x 177.8mm long x 1.6mm thick (1 per EA )

3000mL Bell-Flo™ Complete Flask Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 165mm OD x 290mm Overall Height, 252.7mm across sidearms Two 45mm sidearms angled 53° off the centerline One 100mm Screw Thread Center Neck Indented Bottom: Prevents dead spot under impeller Side Baffles: Three equally spaced baffles, 100mm long x 9mm deep Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings Internal Overhead Bearing Assembly Specifications: Consists of screw cap, cap seal, sealing ring, compression washer, ball bearing spacer, ball bearing, bearing thimble, magnet, o-ring, magnet holder, shaft, & paddle 100mm PP Blue Screw Cap: 82.6mm OD x 22.4mm tall PTFE Cap Seal: 95.3mm OD x 25mm long Red Silicone Sealing Ring: 86mm OD x 76.2mm ID x 6.1mm thick White Silicone Compression Washer: 27.0mm OD x 12.7mm ID x 1.6mm thick PTFE Ball Bearing Spacer: 19.1mm OD x 12.7mm ID x 22.4mm deep PBT & SST Ball Bearing: 19.1mm OD x 6.4mm ID x 7.1mm deep PTFE Bearing Thimble: 31.8mm OD x 19.1mm ID x 38.1mm long PTFE Magnet: 12.7mm OD x 76.2mm long Silicone O-ring: 7.9mm OD x 4.8mm ID PTFE Magnet Holder: 19.1mm OD x 177.8mm long 316L SST Shaft: 6.4mm OD x 190.5mm long PTFE Paddle: 82.6mm wide x 177.8mm long x 1.6mm thick (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 32mm Center cap: 70mm Flask size: 250ml (1 per EA )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 1l Closure: 38 Dimensions: 128x235mm (6 per CS )

Manufactured from type 1 class a Borosilicate glass. Media storage and dispensing flask with bottom hose connection, accepts 1/2" tubing. Graduated to approximate volumes and the heavy duty break resistant neck provides an excellent fit for rubber stoppers. Not for vacuum use. Size: 250mL Dimensions: 80x140mm (6 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. WITHOUT BAFFLES Specifications: Type 1 Class A Borosilicate Glass Sizes: 1800ml OD X OAH (MM):200 X 157 Case Quantity: 1 (1 per EA )

200mm SST 18 port headplate for large flange omni vessels 12@ 1/4" OD 6@ 1/2" OD 1 center for drive motor Large flange headplate assemblies Universal headplates fit 5l thru 36l vessels Corrosion resistant 316l stainless steel Includes red silicone o-ring and 200mm t-bolt clamp o-ring replacements: a554-42 6 each a554-30 12 each a554-13 1 each (1 per EA )

Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. • Thermowell assemblies for 1965 and 1967-style angled sidearm flasks, 3-port • 5/16" od thermowell tube,1/4" siphon and vent tubes • Includes 45mm pp cap and silicone gasket • Seam welded and electropolished • Supply with short width paddle; a523-1244 • Longest tube length: 12 3/4" for both thermowell & fill tube (1 per EA )

Adjustable PTFE Microcarrier paddle blades only , 1-3L Paddle dimensions: 1 1/2" x 4" (1 per EA )

Stainless Steel Shaft Assembly The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and 1965 Spinner Flasks. Sizes range from 100 mL to 36 liters for 1965 spinners and 100 to 3000 mL for 1967 spinner flasks. Material: 316L Stainless Steel and polypropylene compression fitting. Size: 6-8l (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass with rigidly controlled baffle angles and depths. The 3 side baffles are used to promote optimal oxygen transfer while reducing vortex formation. Has a break resistant lip to resist chipping and is designed for use with orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 2L Dimensions: 158x290mm Case Quantity: 2541-02000: 3 (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Break resistant lip to prevent chipping. Specifications: Type 1 Class A Borosilicate Glass Size: 300ml Dimensions: 88x150mm Case Quantity: 12 Baffle Dimensions: 7mm X 35° (12 per CS )

Description: 100mL Stainless Steel Replacement Assembly This assembly consists of; SST shaft, glass impeller shaft bearing, silicone tubing & compression fitting. Specifications of SST Shaft: Material: 316L SST with Electroplish Finish Ra Finish: 32 micro inch or better Dimensions: 6.35mm (1/4”) OD x 120.6mm (4 ¾”) long Specifications of Glass Bearing: Material: Type 1 Class A Borosilicate Glass Dimensions: 9mm OD x 12mm long turn down to 6.35mm end Specifications of Silicone Tubing: Material: Clear Silicone Tubing, FDA approve Dimensions: 4.9mm OD x 2.6mm ID x 15.9mm long to fit shaft & bearing Specifications Compression Fitting: Material: White Polypropylene Dimensions: 6.35mm ID Compression fitting to accept 6.35mm (1/4”) OD SST Shaft (1 per EA )

The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks. (1 per EA )

Type 1 class a Borosilicate glass for freeze drying or cryogenic storage. The neck has pre-drawn constriction to facilitate sealing. Flat bottom Constriction neck Neck od: 6mm Bottom od: 4mm Capacity: 5ml Length: 105mm (144 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for culture aerobic & anaerobic organisms, media storage and mixing. Deep skirted screw caps protect against contamination. Supplied with rubber line black phenolic caps and graduated to approximate volumes. Size: 125mL Cap: 24-415 Dimensions: 66x125mm (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 125mL Closure Sizes: 25mm OD x OAH: 66 x 136mm DeLong Style Neck Case Quantity: 2543-00125: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. Specifications: Type 1 Class A Borosilicate Glass Sizes: 2800ml OD X OAH (MM):210 X 225 Case Quantity: 1 (1 per EA )