Containers

The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks. (1 per EA )

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller Size: 100ml Center Cap:70mm Sidearm cap: 32mm OD X OAH:65 X 135 (1 per EA )

Bioreactor Hose Barb Assembly The Stainless Steel 45mm compression and hose barb cap assembly is designed with a 1/4” ID compression fitting for insertion of tube accessories and 1/4” OD hose barb for silicone tubing attachment. The compression fitting is supplied with a nylon ferrule for easy adjustment of tubes. A blue polypropylene open top cap and white silicone gasket are included. --316L stainless steel compression fitting and hose barb --Blue polypropylene 45mm screw cap with open top --White silicone rubber gasket (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. 3 Side baffles positioned at 120 degree and 3 bottom baffles offset from the side baffles. GL45 polypropylene membrane cap has a sealed in 0.2u PTFE membrane. Cap can be tightened during autoclaving. Specifications: Type 1 Class A Borosilicate Glass Includes Polypropylene Membrane Cap And Pouring Ring Size: 2L Dimensions: 158x260mm Case Quantity: 3 (3 per CS )

Type 1 class a Borosilicate glass ideal for freeze drying or cryogenic storage. Tubular firing off constriction on the neck. Rigidly controller bottom to withstand pressure at low temperature. Tubular round bottom Length: 127mm Neck od: 7mm Capacity: 1ml (144 per CS )

10L bioreactor vessel 240 x 490mm, round bottom. Heavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with CellTrol and speed control module. (1 per EA )

36L round bottom omni vessel 410 x 550mm. Heavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with series 500 controllers or CellTrol (no speed) and OHD or high speed motor system. Takes 200mm large flange headplate. (1 per EA )

Internal impeller is useful because it decreases risk of contamination thorugh the cap. Has an adjustable shaft to align the paddle with the bottom of the flask. Large paddle promotes increased oxygenation with low shear. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. (1 per EA )

Description: Glass Ball Spinner Flask Only Size: 3000mL Material: Type 1 Class A Borosilicate Glass Dimensions: 165mm OD x 290mm Overall Height, 268mm across sidearms Two 45mm Sidearms angled 53° offset center 100mm Screw Thread Center Neck Dimpled Bottom Graduations: 500mL to 3000mL, every 500mL – White Ink (Approx Volumes) Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 4L Closure Sizes: 38mm OD x OAH: 205 x 370mm DeLong Style Neck Case Quantity: 2543-04000: 3 (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 250mL Closure Sizes: 38mm OD x OAH: 80 x 160mm DeLong Style Neck Case Quantity: 2543-00250: 12 (12 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring. Specifications: Type 1 Class A Borosilicate Glass Sizes: 2800ml OD X OAH (MM):210 X 225 Case Quantity: 1 (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 1L Closure Sizes: 38mm OD x OAH: 128 x 235mm DeLong Style Neck Case Quantity: 2543-01000: 6 (6 per CS )

The Anaerobic Culture Bottle is designed for the growth of anaerobic bacteria and maintaining anaerobic conditions. The bottle features a 45 GL screw cap with silicone o-ring and blue butyl rubber stopper. This allows for easy access of contents and eliminates the use of the traditional aluminum seal. Butyl rubber stopper allows for multiple punctures with a needle. Specifications: Type 1 Class A Borosilicate Glass Dimensions: 56mm OD X 100mm OAH Polypropylene Screw Cap With Silicone Gasket And Butyl Rubber Stopper Components Are Fully Autoclavable @ 121° C Case Quantity: 12 (12 per CS )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 1 9/16" (39.6mm) Tube size: 38mm Spacing: 4x6 holds 24 tubes Dimensions: 10" x 6 3/4" x 5" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .162"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

The 4-45 bioreactor vessel is manufactured from Type 1 Class A Borosilicate Glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel cap seal has 5 ports for insertion of 12mm probes and 1/4" tubes. The vessel has an internal impeller assembly with stainless steel ball bearings and PTFE paddle. Specifications: Accepts All Standard Fittings And Probes 316L Stainless Steel Cap Seal with compression fittings for probes/tube insertion. 4 sidearms positioned 90° for increased capabilities. Accessories: 1965-11400 Flask Only, 1L 1965-60014 SST Cap seal, 1L, 5 port with IOB 1965-13400 Flask Only, 3L 1965-60034 SST Cap seal, 3L, 5 port with IOB 1965-45200 45mm Plug w/Compression Fitting & Hose Barb. (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Break resistant lip to prevent chipping. Specifications: Type 1 Class A Borosilicate Glass Size: 2L Dimensions: 158x290mm Case Quantity: 12 Baffle Dimensions: 6mm x35° (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 300mL Closure Sizes: 38mm OD x OAH: 88 x 170mm DeLong Style Neck Case Quantity: 2543-00300: 12 (12 per CS )

• For use with Bellco BioProbe™ Spinner Flask Assemblies • Compression fitting accepts a 12mm OD probe • Monitoring of dissolved oxygen and pH can be achieved without interference from stirring paddles or port and thermowell assemblies • Includes o 316L SST Compression Nut o 316L SST Compression Body o 12mm Teflon Ferrule o 316L SST Hex Nut o 316L SST Washer o 32mm White Silicone Washer o 32mm blue PP screw cap w/ 13/16 hole for compression fitting (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass. Ideal for use of filling other glass vessels. Receiving vessel is placed under bell to maintain aseptic conditions during filling. Attaches to reservoir with rubber tubing. Specifications: Type 1 Class A Borosilicate Glass Dimensions: 49x100mm Tubing Size: 1/2" 2 per case (2 per CS )

Manufactured from type 1 class a Borosilicate glass. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Graduated to approximate volumes Size: 2l Closure: 38 Dimensions: 158x295mm (3 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Ideal for use of filling other glass vessels. Receiving vessel is placed under bell to maintain aseptic conditions during filling. Attaches to reservoir with rubber tubing. Specifications: Type 1 Class A Borosilicate Glass Dimensions: 22x75mm Tubing Size: 1/4" Size: 20mm (2 per CS )

Manufactured from Type 1 Class A Borosilicate Glass. Shake flasks are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for all orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 2L Closure Sizes: 38mm OD x OAH: 158 x 295mm DeLong Style Neck Case Quantity: 2543-02000: 3 (3 per CS )

The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks. (1 per EA )