Misc Accessories

NMR Funnel Polypropylene Lower Fitting Only Polypropylene construction with a lower fitting sized to accommodate 5 mm NMR tubes. Disposable feature eliminates the possibility of cross contamination. Filter is a polyethylene disc or glass wool. (50 per CS )

TLC Rectangular Developing Tanks Clear molded glass developing tank. Unobstructed photography or visual inspection of TLC plates. Complete with Non-slip Lid with PTFE retainers and lifting knob drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm or four 5x20cm Plates. (1 per EA)

KIMAX Neoprene Connector Replacement Neoprene connector for use with Kimax Straight Adapter Tubes. (6 per CS )

Chromatography TLC Developing Tank Rectangular with Latch Lid CHROMAFLEX TLC Latch Lid (1 per EA)

TLC Cylindrical Developing Tank Cylindrical glass tank for the development of 5x20cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with glass lid. (1 per EA)

Chromatography TLC Developing Tank Rectangular with Standard Lid and Aluminum Rack CHROMAFLEX TLC Aluminum Rack (1 per EA)

Chromatography TLC Developing Tank Rectangular with Latch Lid CHROMAFLEX TLC Developing Tank Only Latch (1 per EA)

Chromatography TLC Plate Streaker CHROMAFLEX Approx. Dimensions L x W x H 25 x 15 x 16 cm A simple device for uniformly streaking TLC plates. Unit consists of a stainless steel base with an adjustable holder for a glass reservoir. (1 per EA)

FLEX-COLUMN Flow Adapter Adapter fits 1.0cm I.D. FLEX-COLUMN. Constructed with PTFE eluant cannula Delrin body Viton O-ring seal and 20um polyethylene bed support. Combine two adapters with open-ended FLEX-COLUMN to create an adjustable bed volume column. (1 per EA)

HPLC ULTRA-WARE Fittings Kit THF-Resistant Ferrule for 3/16 O.D. This kit contains all of the tube fittings adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps. Not recommended for use with THF or chlorinated hydrocarbons. (1 per EA)

Chromatography Column Threaded Standard CHROMAFLEX 4.8 cm End Fitting w/ Bed Support Columns are supplied complete with glass barrel and 2 end fittings with 20 m porosity HDPE bed supports. Each column is also supplied with 5 feet (1.5 m) of PTFE tubing (1/16 OD with 1.0 cm 1/8 OD with 2. (1 per EA)

Flow Adapter For use with CHROMAFLEX columns (KT420830). Constructed with PTFE eluant cannula acetal body PTFE/propylene O-ring seal and a 20um polyethylene bed support. Fits 1.0cm column diameter. 1.5mmO.D. Tubing. (1 per EA)

Flow Adapter For use with CHROMAFLEX (KT420570-1500 series). Acrylic columns with safety/water jacket. Constructed with PTFE eluant cannula acetal body PTFE/propylene O-ring seal and a 20um polyethylene bed support. Fits 1.0cm column diameter. 1.5mmO.D. Tubing. (1 per EA)

Chromatography TLC Reagent Sprayer with Screw Thread Ground Joint CHROMAFLEX TLC Sprayer Head for 125 mL flasks The connection between the sprayer head and the flask is made with a special screw thread ground joint connecting cap and loosening ring. (1 per EA)

TLC Rectangular Developing Tanks Clear molded glass developing tank. Allows unobstructed photography or visual inspection of TLC plates. Latch Lid with PTFE retainers holds lid firmly to tank drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm or four 5x20cm Plates. (1 per EA)

Chromatography TLC Plate Streaker CHROMAFLEX Reservoir A simple device for uniformly streaking TLC plates. Unit consists of a stainless steel base with an adjustable holder for a glass reservoir. (1 per EA)

Chromatography TLC Developing Tank Rectangular with Nonslip Lid CHROMAFLEX TLC Developing Tank Only (1 per EA)

Chromatography TLC Developing Tank Rectangular with Nonslip Lid CHROMAFLEX TLC Nonslip Lid (1 per EA)

Chromatography Sample Diffusion Disc Economy FLEX-COLUMN Sample Diffusion Disc 1.5 cm Sample diffusion discs protect the gel bed from being disrupted during sample application whenever a flow adapter is not used. (1 per EA)

HPLC ULTRA-WARE Fittings Kit THF-Resistant Ferrule for 1.8 mm O.D. This kit contains all of the tube fittings adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps. Not recommended for use with THF or chlorinated hydrocarbons. (1 per EA)

Chromatography Packing Reservoir Threaded Standard CHROMAFLEX For Standard Columns Fits Colums ID (cm) 1.0. Nominal Volume 150 mL The CHROMAFLEX Packing Reservoirs are ideal for packing gel slurries into columns. Each packing reservoir is designed for easy mounting on the CHROMAFLEX Columns. (1 per EA)

HPLC Debubbler Mobile Phase ULTRA-WARE Port Threads 1/4-28 external. Cap GPI Thread 13-425 Unit consists of a glass chamber with inlet and outlet ports and a PTFE-lined phenolic cap. Installed before the pump or mixer the debubbler captures bubbles that are released by unscrewing the cap. (1 per EA)

Extraction SPE Disk Glassware and Manifolds SPE Support Base 47 mm All SPE Manifolds are supplied with three-way valves that allow the venting to atmosphere of each station without affecting the vacuum in the rest of the system. (1 per EA)

HPLC Reservoir Conical Bottom Plastic-Coated ULTRA-WARE HPLC RESERVOIR FLAT BOTTOM Capacity 250 mL. Approx. Overall Height x Dia 203 x 85 mm Specially designed for use with all mobile phases. Thread is GL 45-4. (1 per EA)