Buffers and Solutions

Ferric Subsulfate Solution, USP. All Spectrum Chemical USP grade products are manufactured, packaged and stored under current Good Manufacturing Practices (cGMP). (1 per EA )

Cobaltous Chloride TS, (U.S.P. Test Solution) is a ready-for-use solution for the purpose of conducting USP, National Formulary and assay tests and is prepared according to the specifications of the USP Pharmacopeial Convention.

(1 per EA )

Potassium Iodide, 20 Percent (w/v) Aqueous Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Hydrochloric Acid, 1.0 N Aqueous Solution, is a colorless and clear, highly corrosive, highly pungent solution of hydrogen chloride in water. As an monoprotic acid and one of the six common strong mineral acids it is the least likely to be subject to an oxidation-reduction reaction. Hydrochloric acid is also frequently used during chemical analysis to prepare samples for analysis. It reacts with basic compounds, turning them into dissolved chlorides that can then undergo analysis.

(4 per CS )

Sodium Hypochlorite, 5 Percent Available Chlorine, Solution, Reagent - The Reagent grade denotes that this chemical is the highest quality commercially available and that the American Chemical Society has not officially set any specifications for this material. Spectrum Chemical manufactured Reagent grade products meet the toughest regulatory standards for quality and purity.

(6 per CS )

Yellow-Seven (TM) Buffer Solution, pH 7.00 (+/-0.01 @ 25 DEG C), Color-coded Yellow, Reference Standard is an inorganic solution in water. Spectrum solutions utilize the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Sodium Hydroxide, 1.00 N Solution is a standard solution of Caustic soda ideally suited for laboratory titrimetric techniques. You can rely on the quality of LabChem analytical test solutions for lot-to-lot reproducibility.

(1 per EA )

Iodine, 0.01 N (0.005 M) Solution (1 per EA )

Hydrogen Peroxide, 3 Percent Solution, Reagent, is the simplest peroxide, a strong oxidizer that appears as a clear and slightly viscous liquid. Its oxidizing properties are so strong that it is considered a highly reactive oxygen species. Due to it being a weak acid it can form hydroperoxide or peroxide salts. One of its biggest uses is in the treatment of drinking water, removing odors, organic materials and the amount of Hydrogen sulfides and Iron. Its reagent grade means it is used as the standard against which other compounds are graded in analytical testing labs.

(6 per CS )

Hydrogen Peroxide, 35 Percent Solution, Technical - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(4 per CS )

Carboxymethylcellulose Sodium, Medium Viscosity, Viscosity of 2 Percent Aqueous Solution @ 25 DEG C: 400-800 cP, USP is often used as a thickener and stabilizer. All Spectrum Chemical USP grade products are manufactured, packaged and stored under current Good Manufacturing Practices (cGMP). (1 per EA)

Potassium Ferrocyanide, 7 Percent (w/v) Aqueous Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(4 per CS )

Sodium Hydroxide, 1.00 N Solution is a standard solution of Caustic soda ideally suited for laboratory titrimetric techniques. You can rely on the quality of LabChem analytical test solutions for lot-to-lot reproducibility.

(1 per EA )

EDTA Disodium, 0.0575 M Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Buffer Solution, pH 4.01 +/- 0.01 @ 25 DEG C, Reference Standard (1 per EA )

Phenolphthalein, 0.5 Percent (w/v) Indicator Solution in 50 Percent Alcohol, APHA - As an APHA certified solution, this item meets the ASTM D1209 standards for use in water and waste water treatment facilities to determine the concentration of dissolved and particulate materials. Spectrum Chemical manufactured APHA grade products meet the toughest regulatory standards for quality and purity.

(1 per EA )

Dodecyltrimethylammonium Chloride, 50 Percent Solution in Alcohol, High Purity is a quaternary ammonium compound (QAC) commonly used as a cationic surfactant. The High Purity grade denotes that this chemical is the highest quality commercially available. Spectrum Chemical manufactured High Purity grade products meet the toughest regulatory standards for quality and purity.

(1 per EA)

tert-Butyl Hydroperoxide, 70 Percent Solution in Water, with a systematic name of tert-Butyl hydroperoxide, is used in a variety of oxidation processes. Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Polyethyleneimine, 50 Percent (v/v) Aqueous Solution, or PEI, is soluble in hot water as well as in methanol, ethanol, chloroform and at low pH. It ability to modify the surface of cellulose fibres make it usable in many products such as adhesives, cosmetics, water treatment agents and detergents.

(1 per EA )

Benzalkonium Chloride, 17 Percent (w/v), Solution - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Sodium Chloride, 0.85 Percent (w/v) Solution, Normal Saline - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )

Hydrogen Peroxide, 30 Percent, Solution, Reagent is the simplest peroxide, a strong oxidizer that appears as a clear and slightly viscous liquid. Its oxidizing properties are so strong that it is considered a highly reactive oxygen species. Due to it being a weak acid, it can form thermally unstable hydroperoxides. One of its biggest uses is in the treatment of drinking water, removing odors, organic materials and the amount of Hydrogen sulfides and Iron. As a Reagent grade, Spectrum Chemical manufactured Hydrogen Peroxide is a high quality chemical suitable for use in many analytical and general laboratory applications.

(1 per EA )

Potassium Permanganate, 0.1 N Aqueous Solution - Spectrum solutions utilize the highest quality raw materials appropriate to your product. Most raw materials meet or exceed the specifications established by the American Chemical Society. Where appropriate, many finished products are traceable to NIST Standard Reference Materials. Manufacturing, quality control testing, and packaging are all performed in Spectrum’s own facilities. Record keeping and sample retention of all produced lots ensure product consistency and complete traceability.

(1 per EA )

Sodium Hydride, 60 Percent Dispersion in Mineral Oil, a chemical compound, can be used in organic synthesis as a strong base, as well as a drying agent to dry organic solvents. Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

(1 per EA )