Centrifuge Bottles

High speed tubes feature a round bottom and uniform wall thickness Tubes are economical and leak-proof for refrigerated or standard centrifugation Tube should be filled 80% of total capacity to obtain maximum results (12 per CS)

Autoclavable Polypropylene (PP) Centrifuge Bottles, 500 mL with Seal Cap, 24/CS (24 per CS )

Made of USP VI polypropylene. Autoclave at 120C /15 Ib. Non-pyrogenic, Dnase/Rnase and human DNA free. Round Bottom, Self-standing. Autoclavable. Sterilized by E-beam, SAL=10-6 . Clear graduations and white marking area. Recommend to store in gas phase of the nitrogen tank. Internal thread Cap: Special screw cap designed with silicone O-ring to secure the sealing under various condition. External thread Cap: Special screw cap designed without silicone ring to avoid risk of contamination. (102 per CS )

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (24 per CS )

Autoclavable Polycarbonate Centrifuge Bottles, 500 mL with Seal Cap, 24/CS (24 per CS )

Centrifuge Tube, Conical, 500mL, PP, sterile, with screw-cap, 8 per bag, 5 bags per case, 40/cs (320 per CS )

These large volume centrifuge tubes are engineered to meet the demands of the most critical scientific work. The premium grade polypropylene (PP) tubes have molded graduation marks and leak-proof screw caps. Features: Polypropylene (PP) tube with high d (6 per PK)

For applications requiring large volume centrifugation Tubes include molded graduation lines Polyethylene (HDPE) cap with integrated plug seal provides a secure closure Temperature range of -80°C to 120°C Use of a rotor cushion is advised to support tubes during centrifugation (48 per CS)

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (36 per CS )

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (24 per CS )

Translucent and provides chemical resistivity needed for many applications Bottle should be filled 75% of total capacity to obtain maximum results Centrifuge Bottles have a rigid body for low to moderate speed centrifugation of biological and chemical samples High quality polycarbonate and polypropylene have excellent chemical resistance Reusable and autoclavable Use of a rotor cushion is advised to support bottles during centrifugation Packaged non-sterile in re-sealable bags (2 per CS)

225mL Conical Bottom Centrifuge Tube, Sterile (48 per CS )

High speed tubes feature a round bottom and uniform wall thickness Tubes are economical and leak-proof for refrigerated or standard centrifugation Tube should be filled 80% of total capacity to obtain maximum results (12 per CS)

175mL conical centrifuge tube, PP, with PE plug type screw cap. Packed 6 per sterile bag, 120 tubes (20 bags) per case. (120 per PK )

These new Oakridge Style Centrifuge Tubes from Globe Scientific are the economic choice for high speed refrigerated or non-refrigerated centrifugation. Molded from durable, chemical resistant polypropylene, the tubes have round bottoms and consistent wall (12 per PK)

For applications requiring large volume centrifugation Tubes include molded graduation lines Polyethylene (HDPE) cap with integrated plug seal provides a secure closure Temperature range of -80°C to 120°C Use of a rotor cushion is advised to support tubes during centrifugation (48 per CS)

Optically clear for high visibility Seal cap features integrated silicone gasket for leak-proof seal Cap has extended lip to facilitate removal from rotor,and gripping ridges for easy opening and closing Bottles include molded graduation lines Bottle should be filled 80% of total capacity to obtain maximum results Centrifuge Bottles have a rigid body for low to moderate speed centrifugation of biological and chemical samples High quality polycarbonate and polypropylene have excellent chemical resistance Reusable and autoclavable Use of a rotor cushion is advised to support bottles during centrifugation Packaged non-sterile in re-sealable bags (4 per CS)

These large volume centrifuge tubes are engineered to meet the demands of the most critical scientific work. The premium grade polypropylene (PP) tubes have molded graduation marks and leak-proof screw caps. (48 per CS)

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (36 per CS )

Autoclavable Polycarbonate (PC) Centrifuge Bottles, 250 mL with Screw Cap, 36/CS (36 per CS )

These new Oakridge Style Centrifuge Tubes from Globe Scientific are the economic choice for high speed refrigerated or non-refrigerated centrifugation. Molded from durable, chemical resistant polypropylene, the tubes have round bottoms and consistent wall (12 per PK)

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (36 per CS )

Autoclavable Polycarbonate (PC) Centrifuge Bottles, 250 mL with Seal Cap, 36/CS (36 per CS )

Tubes Centrifuge Tube Oil 1.5 mL Stem Capacity (mL) 200. Subdivision (mL) 0-3% in 0.10%3-5 in 0.505-10 in 110-100 in 10100-200 in 20. Tolerance (mL) 0 to 1.5 - 0.03Above 1.5 to 3 - 0.20Above 3 to 5 - 0.30Above 5 to 10 - 0.50Above 10 to 25 - 1.00Above 25 to 100 - 2.00. O. (6 per CS )