Centrifuge Tubes

Macrocentrifuge Tube, 5.0mL, PP, Attached Snap Cap, Graduated, Blue, 50/Bag, 4 Bags/Unit, CS200 (2000 per CS)

Microtube, 2mL, Self-Standing, PP, No Cap, PK1000 (1000 per PK)

Microcentrifuge Tube, 1.5mL, PP, Attached Snap Cap, Graduated, Pink, PK1000 (1000 per PK)

Wireless MicroTube Rack with Handles for 1.5mL and 2.0mL Microcentrifuge Tubes, 96-Place, White, EA1 (1 per EA)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

Stackable polycarbonate racks are compatible with both 1.5ml and 2.0ml Micro Centrifuge Tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide te (8 per PK )

Tube Cent 50mL Ster Bulk 20-BG/25 (25 per CS )

Tube Cent 50mL Self-St Ster Bulk20-BG/25 (25 per CS )

Tube 0.5mL stand clr-t/blu-cap 10-BG/500 (5000 per CS )

Tube 0.5mL stand clr-t/gr-cap 10-BG/500 (5000 per CS )

Tube 0.5mL stand ind ster clear10-BG/500 (5000 per CS )

Tube 0.5mL stand clr-t/red-cap 10-BG/500 (5000 per CS )

Tube 1.5mL stand clr-t/blu-cap 10-BG/500 (5000 per CS )

Tube 1.5mL stand ind ster clear10-BG/500 (5000 per CS )

Tube 1.5mL stand clr-t/pur-cap 10-BG/500 (5000 per CS )

Tube 1.5mL stand clr-t/yel-cap 10-BG/500 (5000 per CS )

30mL size is an ideal option for intermediate centrifuge tube volumes Self-standing base for use without a rack Molded graduations ensure volume accuracy to +/- 2% Conical bottom for maximized sample retrieval Easy to write on flat surface caps feature integrated leak-proof seal Convenient zip-closure bag is a practical alternative to folding and taping opened bags (500 per CS)

Microcentrifuge tube racks,13mm,84 tubes,6x14,blue,pack of 5 (5 per PK)

Microcentrifuge tube racks,11mm,128 tubes,8x16,white,pk of 5 (5 per PK)

30mL size is an ideal option for intermediate centrifuge tube volumes Self-standing base for use without a rack Molded graduations ensure volume accuracy to +/- 2% Conical bottom for maximized sample retrieval Easy to write on flat surface caps feature integrated leak-proof seal Convenient zip-closure bag is a practical alternative to folding and taping opened bags (500 per CS)

Microcentrifuge Tube, 1.5mL, PP, Attached Snap Cap, Graduated, Orange, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag, PK500 (500 per PK)

1.5mL Micro Centrifuge Tube, Low Retention, Non-sterile (500 per CS )

Available with standard caps for low-speed work and sealing caps for high-speed applications-sealing caps have a built-in gripper to facilitate removal from the rotor Extra thick walls for durability-resistant to most chemicals Wide mouth design makes filling and decanting easier These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. Bottles with standard caps provide reliable performance up to 8250 xg in swinging bucket and fixed angle rotors. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration. (36 per CS )