Centrifuge Tubes

Microtube w/ cap, 0.5mL, assorted (B, R, G, P, Y), sterile, w/ self-standing bag, 500/pk (500 per PK )

Reversible Rack for Microcentrifuge Tubes, 80-Place for 1.5mL and 2.0mL and Reverse Side is 60-Place for 0.2mL and 0.5mL Tubes, Natural, 5/Pack, PK5 (5 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

Polypropylene tubes include a convenient flat bottom so they stand on their own, a large white frosted labeling area, silk screen graduations, and a leak-proof cap. Autoclavable at 121°C and 15 psi for 30 minutes. Radiation sterilized. DNase, RNase, Pyrog (500 per PK )

Translucent and Opaque Cap O-rings ensure leak-proof seal, and are a highly visible contrasting color All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)

Rack for 1.5mL and 2.0mL Microcentrifuge Tubes, Reinforced PP, 20-Place, Blue (6 per CS)

Screw Cap Microtube, 2.0mL, no printing (no graduations/marking area), sterile w/ O-ring and attached natural color cap, self-standing, 50/bag, 1000/cs (1000 per CS )

MICROTUBE RACKS 80-WELL Popular fraction-collector-plate style rack Made of polypropylene Easily fill and transfer 80 tubes in compact arrangement Compact arrangement (5 x 16 array) Molded-in coordinates to aid organization Autoclavable (5 per PK )

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand Color tubes allow for quick sample identification, or to customize workflows (500 per CS )

Reversible Rack with Cover for Microcentrifuge Tubes, 96-Place for 1.5mL and 2.0mL and Reverse Side is 96-Place for 0.2mL and 0.5mL Tubes, Blue, 5/Pack, PK5 (5 per PK)

50mL Conical Tube, Bulk, Sterile, Clear, PK50, CS500 (500 per CS)

50mL Conical Tube, Racked, Sterile (1 Racks Of 25 Tubes Per Pack), Clear, PK25, CS500 (500 per CS)

Float Rack for 1.5mL Microcentrifuge Tubes, Round, 8-Place, 65mm Diameter, White, 4/Pack (16 per CS)

Screw Cap Microtube, 2.0mL, no printing (no graduations/marking area), sterile w/ O-ring and attached natural color cap, self-standing, 50/bag, 1000/cs (1000 per PK )

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

MICROCENT.TUBES 0.5ML ORNPK500Bio Plas flat top microcentrifuge tube 0.5 ml orange.

Rack for 1.5mL and 2.0mL Microcentrifuge Tubes, Stackable, Polycarbonate (PC), 24-Place, Yellow (8 per CS)

Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Blue, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag, PK500 (500 per PK)

Rack for 1.5mL and 2.0mL Microcentrifuge Tubes, Reinforced PP, 20-Place, Red (6 per CS)

50mL Centrifuge Tube, Best Value - Paperboard Rack, Sterile, 25/rack, CS500 (500 per CS )

Made from high-quality virgin polypropylene, these Micro Centrifuge Tubes are RNase, DNase and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted sur (1000 per PK )

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (5000 per CS)

High Clarity PP Centrifuge Tube, Conical Bottom, Sterile, 50mL (25/Rack; 500/Case) (500 per CS )