This category covers replacement parts and accessories for vortex mixers. It includes cup heads and rubber tube cups for single tubes, flat and dimpled pads, and round plate adapters that hold foam inserts. There are also foam inserts and tube holders for microtubes from 0.5 to 2.0 mL and tubes up to about 30 mm in diameter, microplate holders, racks for 0.2 mL PCR tubes or strips, and flask holders. Smaller parts include suction feet, silicone covers and caps, and 12V power adapters for mini vortex mixers. Many parts are made for a specific series, such as the GVM and GVM-MULTI mixers or the VXHD and VXMP models named in the product titles.

Before ordering, confirm that the part is listed for your mixer model, because heads and platforms are rarely interchangeable between brands. Some foam holders and dimpled pads also need a base plate or rod, such as the VM-AS-PLATE or GVM-AS-ROD named in the titles. Match each insert to your tube diameter and the number of positions you need, and check the voltage and plug on power adapters.

Vortex Mixer Parts: common questions

What are the parts of a vortex mixer?

A vortex mixer has a motor that drives an off-center (eccentric) mount, so the head moves in a small, fast orbit. The head may be a rubber cup for single tubes, or a flat platform that holds pads, foam inserts or plate holders. The base holds the motor, a speed control and a mode switch, typically touch-activated or continuous, and sits on feet that keep it from walking on the bench.

Can I vortex microcentrifuge tubes or PCR strips?

Yes, with the right attachment. Foam inserts and holders for 0.5 mL and 1.5 to 2.0 mL microtubes, and racks for 0.2 mL PCR tubes or strips, let you mix many tubes at once on a platform head. Choose a holder made for your mixer model and tube size so the tubes are held firmly while the platform moves.

Can a vortex mixer hold microplates?

Many vortex mixers accept a microplate holder on a platform head. This category includes 2-place and 4-place microplate holders and combination tube and well plate holder kits. Plates are usually mixed at lower speeds to avoid splashing between wells, so check your mixer's speed range.

What is the difference between a cup head and a flat pad?

A cup head is a rubber cup that you press a single tube into, which starts the mixer in touch mode on many models. A flat or dimpled pad gives a wider surface for pressing tubes or small vessels, and some platform pads accept foam inserts and holders for several tubes. Pick the head that matches how many samples you mix at a time.

Vortex Mixer Parts

Filters
Set Descending Direction

96 items

Page
per page
View as List Grid
  1. 8 cm Head with Rubber Cover
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $90.95 Special Price $73.50
  2. Tube Rack, 15 x 25mm
    Manufacturer: Benchmark Scientific
    Tube Rack, 15 x 25mm, EA /1 (1 per EA)
    Learn More
    was $49.39 Special Price $46.83
  3. Micro-Tube Holder, Pack of 2
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $112.95 Special Price $91.27
  4. 50 mL Tube Rack (Red)
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $74.95 Special Price $60.57
  5. Microtube Kit with Retainer
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $193.95 Special Price $156.69
  6. Tube holder, foam, 72 x 1.5/2.0mL tubes, for GVM-MULTI
    Manufacturer: Globe Scientific
    Tube holder, foam, 72 x 1.5/2.0mL tubes, for GVM-MULTI (1 per EA)
    Learn More
    was $55.00 Special Price $48.12
  7. Tube Rack, 15 x 50ml (29mm)
    Manufacturer: Benchmark Scientific
    Tube Rack, 15 x 50ml , 29mm , EA /1 (1 per EA)
    Learn More
    was $49.39 Special Price $46.83
  8. 16 mm Tube Rack (Green)
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $74.95 Special Price $60.57
  9. Tube holder, foam, 45 x 15ml tubes, for GVM-MULTI
    Manufacturer: Globe Scientific
    Tube holder, foam, 45 x 15ml tubes, for GVM-MULTI (1 per EA)
    Learn More
    was $55.00 Special Price $48.12
  10. Tube Rack, 50 x 13mm
    Manufacturer: Benchmark Scientific
    Tube Rack, 50 x 13mm, EA /1 (1 per EA)
    Learn More
    was $49.63 Special Price $47.05
  11. Tube Holder, Foam, for use w GVM Series 8 x 20mm Tubes, Must use w VM-AS-PLATE/GVM-AS-ROD
    Manufacturer: Globe Scientific
    The GVM-AS Variable Speed Vortex Mixer is the best choice for vortex mixing in your lab. Speed adjustment between 100 - 2500rpm is as easy as rotating the analog dial. A slight press on the top cup quickly and efficiently vortexes virtually any tube. Cont (1 per EA)
    Learn More
    was $38.60 Special Price $30.96
  12. Flat Foam Insert, Pack of 2
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $50.95 Special Price $41.19
  13. Tube Holder, Foam, for use w GVM Series 12 x 12mm Tubes, Must use w VM-AS-PLATE/GVM-AS-ROD
    Manufacturer: Globe Scientific
    The GVM-AS Variable Speed Vortex Mixer is the best choice for vortex mixing in your lab. Speed adjustment between 100 - 2500rpm is as easy as rotating the analog dial. A slight press on the top cup quickly and efficiently vortexes virtually any tube. Cont (1 per EA)
    Learn More
    was $38.60 Special Price $30.96
  14. Ampule Tube Holder - Small (15-17mm)
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $203.95 Special Price $164.77
  15. Tube Holder, Foam, for use w GVM Series 8 x 16mm Tubes, Must use w VM-AS-PLATE/GVM-AS-ROD
    Manufacturer: Globe Scientific
    The GVM-AS Variable Speed Vortex Mixer is the best choice for vortex mixing in your lab. Speed adjustment between 100 - 2500rpm is as easy as rotating the analog dial. A slight press on the top cup quickly and efficiently vortexes virtually any tube. Cont (1 per EA)
    Learn More
    was $38.60 Special Price $30.96
  16. Post Extension Kit
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $295.95 Special Price $239.07
  17. Foam Insert Blank
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $68.95 Special Price $55.73
  18. Vortexer Mixer Replacement Central Pad, Black
    Manufacturer: Heathrow Scientific
    Vortexer Mixer Replacement Central Pad, Black (3 per PK )
    Learn More
    $17.99
  19. Tube Rack, 96 x 0.5ml (8mm)
    Manufacturer: Benchmark Scientific
    Tube Rack, 96 x 0.5ml , 8mm , EA /1 (1 per EA)
    Learn More
    was $49.39 Special Price $46.83
  20. Magnetic Induction replacement Power Adapter
    Manufacturer: Heathrow Scientific
    Magnetic Induction replacement Power Adapter (1 per EA )
    Learn More
    was $66.64 Special Price $63.80
  21. LM-210 SET MAIN BODY, STAND, PTFE STIRRING BAR W/ PROPELLER L450mm×50mm, BURETTE CLAMP 9.5 29mm and Double Opening Clamp 3 55mm
    Manufacturer: Yamato Scientific America
    Yamato, LM-210 Flask Mixer, 50-1000 rpm, 220V, Digital Display Flask Mixer, 50-1000 rpm, 220V, Digital Display LM Series compact design laboratory flask mixer features integrated drive and stirring seal allowing direct installation of flask and stirring (1 per EA )
    Learn More
    was $1,250.00 Special Price $1,124.12
  22. Tube holder, foam, 60 x 7ml tubes, for GVM-MULTI
    Manufacturer: Globe Scientific
    Tube holder, foam, 60 x 7ml tubes, for GVM-MULTI (1 per EA)
    Learn More
    was $55.00 Special Price $48.12
  23. Horizontal head, for 4 x 15ml
    Manufacturer: Benchmark Scientific
    Horizontal head, for 4 x 15ml, EA /1 (1 per EA)
    Learn More
    was $118.55 Special Price $105.81
  24. Flask MIXER EQUIPPED WITH DIGITAL INDICATOR MAIN BODY ONLY 50~1000 rpm 220V
    Manufacturer: Yamato Scientific America
    Yamato, LM-210 Flask Mixer, 50-1000 rpm, 220V, Digital Display Flask Mixer, 50-1000 rpm, 220V, Digital Display LM Series compact design laboratory flask mixer features integrated drive and stirring seal allowing direct installation of flask and stirring (1 per EA )
    Learn More
    was $700.00 Special Price $629.51
Filters
Set Descending Direction

96 items

Page
per page
View as List Grid