This category covers replacement parts and accessories for vortex mixers. It includes cup heads and rubber tube cups for single tubes, flat and dimpled pads, and round plate adapters that hold foam inserts. There are also foam inserts and tube holders for microtubes from 0.5 to 2.0 mL and tubes up to about 30 mm in diameter, microplate holders, racks for 0.2 mL PCR tubes or strips, and flask holders. Smaller parts include suction feet, silicone covers and caps, and 12V power adapters for mini vortex mixers. Many parts are made for a specific series, such as the GVM and GVM-MULTI mixers or the VXHD and VXMP models named in the product titles.

Before ordering, confirm that the part is listed for your mixer model, because heads and platforms are rarely interchangeable between brands. Some foam holders and dimpled pads also need a base plate or rod, such as the VM-AS-PLATE or GVM-AS-ROD named in the titles. Match each insert to your tube diameter and the number of positions you need, and check the voltage and plug on power adapters.

Vortex Mixer Parts: common questions

What are the parts of a vortex mixer?

A vortex mixer has a motor that drives an off-center (eccentric) mount, so the head moves in a small, fast orbit. The head may be a rubber cup for single tubes, or a flat platform that holds pads, foam inserts or plate holders. The base holds the motor, a speed control and a mode switch, typically touch-activated or continuous, and sits on feet that keep it from walking on the bench.

Can I vortex microcentrifuge tubes or PCR strips?

Yes, with the right attachment. Foam inserts and holders for 0.5 mL and 1.5 to 2.0 mL microtubes, and racks for 0.2 mL PCR tubes or strips, let you mix many tubes at once on a platform head. Choose a holder made for your mixer model and tube size so the tubes are held firmly while the platform moves.

Can a vortex mixer hold microplates?

Many vortex mixers accept a microplate holder on a platform head. This category includes 2-place and 4-place microplate holders and combination tube and well plate holder kits. Plates are usually mixed at lower speeds to avoid splashing between wells, so check your mixer's speed range.

What is the difference between a cup head and a flat pad?

A cup head is a rubber cup that you press a single tube into, which starts the mixer in touch mode on many models. A flat or dimpled pad gives a wider surface for pressing tubes or small vessels, and some platform pads accept foam inserts and holders for several tubes. Pick the head that matches how many samples you mix at a time.

Vortex Mixer Parts

Filters
Set Descending Direction

96 items

Page
per page
View as List Grid
  1. Foam Insert (38) 1.5-2.0 mL Microtubes
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $68.95 Special Price $55.73
  2. Tube Holder Kit with Retainer
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $324.95 Special Price $262.50
  3. .5 mL Micro-Tube Holder
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $120.95 Special Price $97.73
  4. Large Vessel Holder For 500 ml/1 L Flask
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $80.95 Special Price $65.43
  5. Foam test tube holding rod
    Manufacturer: Scilogex
    Foam test tube holding rod (NEW!) (1 per EA)
    Learn More
    was $96.00 Special Price $75.60
  6. Foam Insert For (4) 26-29 mm Tubes
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $68.95 Special Price $55.73
  7. Tube holder, foam, 18 x 50ml tubes, for GVM-MULTI
    Manufacturer: Globe Scientific
    Tube holder, foam, 18 x 50ml tubes, for GVM-MULTI (1 per EA)
    Learn More
    was $55.00 Special Price $48.12
  8. Vortexer Flat head
    Manufacturer: Benchmark Scientific
    Vortexer Flat head, EA /1 (1 per EA)
    Learn More
    was $46.55 Special Price $41.54
  9. Insert Retainer
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $217.95 Special Price $176.07
  10. Plate Adapter, Round, 100mm, GVM Series for use w Foam Tube Adptrs & Dimpled Pad
    Manufacturer: Globe Scientific
    The GVM-AS Variable Speed Vortex Mixer is the best choice for vortex mixing in your lab. Speed adjustment between 100 - 2500rpm is as easy as rotating the analog dial. A slight press on the top cup quickly and efficiently vortexes virtually any tube. Cont (1 per EA)
    Learn More
    was $40.00 Special Price $32.09
  11. Cup Head, VXHD and VXMP Vortex Mixers
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $67.95 Special Price $54.93
  12. Mini Vortex Mixer Replacement Power Adapter 12V
    Manufacturer: Heathrow Scientific
    Mini Vortex Mixer Replacement Power Adapter 12V (1 per EA )
    Learn More
    $49.72
  13. Foam Insert For (20) 15-18 mm Tubes
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $68.95 Special Price $55.73
  14. Tube Rack, 50 x 1.5/2.0ml (10mm)
    Manufacturer: Benchmark Scientific
    Tube Rack, 50 x 1.5/2.0ml , 10mm , EA /1 (1 per EA)
    Learn More
    was $49.39 Special Price $46.83
  15. Micro Tube and Well Plate Holder Kit
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $193.95 Special Price $156.69
  16. 13 mm Tube Rack (Yellow)
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $59.95 Special Price $48.46
  17. Holder For 14-19 mm Tubes, Pack of 2
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $54.95 Special Price $44.43
  18. Mini Stirrer Replacement Power adapter 12V
    Manufacturer: Heathrow Scientific
    Mini Stirrer Replacement Power adapter 12V (1 per EA )
    Learn More
    $49.72
  19. Rack for up to 3 microplates
    Manufacturer: Benchmark Scientific
    Rack for up to 3 microplates, EA /1 (1 per EA)
    Learn More
    was $189.37 Special Price $179.51
  20. Flat Head Platform Pad for use SCI-VS Vortex Mixers, requires Universal Adapter
    Manufacturer: Scilogex
    Flat Head Platform Pad for use MX-S Vortex Mixers, requires Universal Adapter (1 per EA)
    Learn More
    was $12.00 Special Price $9.45
  21. Cup Head
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $67.95 Special Price $54.93
  22. SCILOGEX Universal Circular Adapter to secure various rubber tube foam inserts or flat head platform pad
    Manufacturer: Scilogex
    SCILOGEX Universal Circular Adapter to secure various rubber tube foam inserts or flat head platform pad (1 per EA)
    Learn More
    was $35.00 Special Price $27.30
  23. Tube Rack, 50 x 12mm
    Manufacturer: Benchmark Scientific
    Tube Rack, 50 x 12mm, EA /1 (1 per EA)
    Learn More
    was $49.39 Special Price $46.83
  24. 12 mm Tube Rack (Blue)
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $59.95 Special Price $48.46
Filters
Set Descending Direction

96 items

Page
per page
View as List Grid