Shakers

The GTR-IA Tube Rotator packs a lot of value in a simple, easy to use package. With a 'Ferris Wheel' disk design and analog speed control, operation and setup can be completed in minutes the very first time and every time. The fixed angle disk utilizes cl (1 per EA)

Biologix economical digital linear shaker, 100v-220v/50hz/60hz,1 piece/case. (1 per EA )

RotoBot Mini Programmable Rotator, includes tube holders for 12x1.5ml, 2x15ml and 2x50ml, EA /1 (1 per EA)

BS2-10, Shaking Heating Bath, 17L, 120V, 60Hz (1 per EA )

MultiTherm Shaker with heating and cooling, 230V, EA /1 (1 per EA)

BenchRocker 2D Rocker, variable speed, 14in. x12in. platform with flat mat, 230V, EA /1 (1 per EA)

BenchRocker 2D Rocker, variable speed, 14in. x12in. platform with flat mat, 115V, EA /1 (1 per EA)

Orbi-Shaker CO2 XL orbital shaker with flat mat platform, 230V REQ LTL SHIPPING (1 per EA)

Roto-Mini Plus Variable Speed Rotator with tube holders, 230V EA/1 (1 per EA)

Reliable Rocking and Waving Shakers with Simple Adjustments for Tilt Angle and Speed (1 per EA)

The Bellco Process Controlled Top Drive Roller Apparatus has a capacity of either 53 or 86 full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length), depending upon model. The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm with the ability to select clockwise or counter clockwise direction. Four corner bumpers and two locking castors (on the front wheel positions) are also provided. Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. A fused power inlet module makes fuse replacement easy and also permits the user to completely disconnect the power cord when the unit is cleaned or relocated. (1 per EA )

The Bellco Rocker Platforms provide a gentle uniform rocking motion, required for even coverage of media over mono-layer cell cultures, thereby maximizing cellular health and viability. Viral suspensions introduced onto a mono-layer of cells will yield higher virus titers. Additionally, rocker platforms are ideal for performing staining and destaining of gel and filter assays. They are engineered to operate between 0 to 12 oscillations per minute. Units are delivered with either a 25 x 25 cm or 51 x 51 cm tray. Additional interchangeable trays are also available. --Speed range: 0 to 12 oscillations per minute --Platform tilt: 7 fixed (1 per EA )

The GTR-2-FS fixed-speed tube rocker takes the proven design of the GTR-FS single tier model and adds another tier for even more capacity. With its see-saw motion, a fixed speed of 24rpm and an angle of +/- 25° it provides optimal mixing. The ridged platf (1 per EA)

TubeRocker Compact Rocker with grooved mat for tubes, 230V, EA /1 (1 per EA)

CBS-350 Heating Shaker, 120V, 60Hz, Category=Shakers, 120V, 60Hz (1 per EA)

These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white silicone gasket. (1 per EA )

The Bellco Mini Tube Roller is a variable speed roller unit for general laboratory usage. The compact size is ideal for experimental and pilot-scale operations. Methods developed on this unit can easily be scaled up. Robustly constructed and designed for easy cleaning, with EPDM rubber rollers to assure safe positive rotating motion. The unit has 11 rollers, five of which can be removed to accommodate various bottle dimensions. When using hybridization tubes, an o-ring (A12-1067) must be fitted on the lower end to equalize the diameter of the screw cap. When alternate rollers are removed, 3 roller bottles up to 120 mm can rotate at a maximum speed of 4 rpm. (1 per EA )

Orbi-Shaker CO2 XL orbital shaker with flat mat platform, 115V REQ LTL SHIPPING (1 per EA)

MultiTherm Shaker with heating and cooling, 115V, EA /1 (1 per EA)

Eight Orbital Shakers Offering a Variety of Capacities and Flexibility to Maximize Sample Processing. Ready for your lab – all models include a tray and rubber mat and can be customized with over 70 accessory options. Rely on the digital shakers' exclusive Accu-Drive shaking system for exceptional speed control, accuracy, and durability. All models feature a maintenance-free motor for long-term use. Protect your samples. Optimal speed ramping feature slowly increases the speed to setpoint to avoid splashing. The load sensor detects unbalanced conditions and automatically reduces to a safe speed. (1 per EA)

Incu-Shaker 20LR (Refrigerated) with non-slip rubber mat, 115V (1 per EA)

Orbi-Shaker Jr with rubber mat platform , 9.5in. x8in. , 100-240V , US Plug , EA /1 (1 per EA)

SCILOGEX MX-T6-Pro LCD Digital Tube Roller, variable speed, 6 rollers 100-220V, 50Hz/60Hz, US Plug (1 per EA)

Save Incubator Space with Benchtop Incubating and Incubating Refrigerating Shakers. The exclusive Opti-Flow Forced Ventilation System utilizes twin induction or a single large fan. Air is deflected around & not directly on samples, creating a circular flow of air ensuring uniformity. For repeatable results, the exclusive Accu-Drive shaking system ensures speed accuracy. The Triple Eccentric Drive provides consistent shaking motion throughout the entire speed range. The chambers for the ISHD23HDG and ISHD23CDG units are large enough to hold 2 x 6 L Erlenmeyer flasks with optional clamps and platform. (1 per EA)